OpenBCM V1.13 (Linux)

Packet Radio Mailbox

DB0FHN

[JN59NK Nuernberg]

 Login: GUEST





  
ZL3AI  > APRDIG   06.07.03 10:23l 147 Lines 4978 Bytes #999 (0) @ WW
BID : 1576-ZL3AI
Read: GUEST
Subj: TAPR Digest, Jul 03, 2/2
Path: DB0FHN<DB0RGB<OK0PPL<DB0RES<ON0BEL<VK7AX<ZL2BAU<ZL3VML
Sent: 030705/1405Z @:ZL3VML.#80.NZL.OC #:3818 [Chch-NZ] FBB7.00i $:1576-ZL3AI
From: ZL3AI@ZL3VML.#80.NZL.OC
To  : APRDIG@WW

Subject: Re: compressed packets
From: "Sean \\The RIMBoy\\" <sean@rimboy.com>
Date: Thu, 3 Jul 2003 16:32:58 -0500 (CDT)
X-Message-Number: 9

On Thu, 3 Jul 2003, Wes Johnston wrote:

>The reason I'm hunting this down is to find operators of software which
>decompresses packets on the fly - such as older copies of winaprs.  Are
>there any others?

As in software?  Yes, aprsd will do it if it's turned on.  After N8DEU
brought it to my attention we made sure those people running igates
feeding Nashvilleaprs.net had it shut off.  Version 0.2 of my RIMiGate
software (which uses aprsd) has MicE decoding turned off by default, 0.1
had it turned on.

Sean...

--
Believing I had supernatural powers, I slammed into a brick wall.
	--Paul Simon
_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
KG4NRC  http://www.rimboy.com  Your source for the crap you know you need.

----------------------------------------------------------------------

Subject: Re: compressed packets
From: Bob Bruninga <bruninga@usna.edu>
Date: Thu, 3 Jul 2003 19:23:00 -0400 (EDT)
X-Message-Number: 10

Lets use the correct terminology.  I think you are talking about Mic-E
format and not "compressed" which is a different and little used APRS
format.

Second, only position reports are Mic-E.  Messages and Bulletins are sent
in normal APRS message format.

Does that help?
Bob

----------------------------------------------------------------------

Subject: Re: compressed packets
From: Bob Bruninga <bruninga@usna.edu>
Date: Thu, 3 Jul 2003 19:24:35 -0400 (EDT)
X-Message-Number: 11

OOPS, nevermind.  I was half right. (These are Mic-E)
but the others are "converted" position reports which is what your point
was...  nevermind.  Back under my rock... Bob

----------------------------------------------------------------------

Subject: GPS and KPC3 Combo
From: "Eric Christensen" <kf4otn@earthlink.net>
Date: Thu, 3 Jul 2003 20:15:38 -0400
X-Message-Number: 12

I'll be taking a little trip here in a few weeks in someone else's
car and then returning by train...  I have just built a cable to go
from my KPC3 and my Kenwood TH-25AT so I can run my I-Gate completely
on batteries.  But, I would now like to interface my GPS to my KPC3
so I can have a tracker while cruising (from Eastern North Carolina
to Connecticut and back).

Here are a few questions I have...

1. Can I hook the GPS up through the 9-pinn port on the modem?  I
have a weather station that is hooked up like this so I'm guessing
that I can. (?)  I would rather do this just incase I want to hook up
my laptop to the whole shebang...

2. How do I put my symbol information in with the GPS string that is
sent out over the air.  Should I mention that I only have Version 6.0
firmware in this modem?

73s,
Eric KF4OTN

----------------------------------------------------------------------

Subject: Re: GPS and KPC3 Combo
From: WA8LMF2@aol.com
Date: Thu, 3 Jul 2003 21:47:18 EDT
X-Message-Number: 13

Get a TinyTrak3 and use it instead of the KPC3.  It's far less hassle for a 
mobile installation.   The older KPC3 firmware is limited in capability.   

The TT sends much shorter packets that are more likely to get through, and
it incorporates smart beaconing that automatically transmits less
frequently when you move slowly or stop.    It can store two different
configurations of path, comment field and transmit interval that can be
switch-selected in the field without a computer. It can transmit either
plain text or Mic-E compressed mode for REALLY short bursts. If you really
want to save battery power, the TT3 can be configured to control a relay to
turn on power to the radio just before it beacons and turn it off
afterwards until the next beacon.      

All for less than the cost of a firmware upgrade for the KPC3! ( $xx for the
kit! )

Full info at:
     http://www.byonics.com

Stephen H. Smith                   wa8lmf (at)  aol.com 
Home Page:                                         http://wa8lmf.com
Ham Radio/Mobile SSTV page:     http://members.aol.com/wa8lmf/ham
APRS Stuff                                              
http://members.aol.com/wa8lmf/aprs

----------------------------------------------------------------------

Subject: Re: Wireless Hunters on the Prowl
From: blitz <blitz@macronet.net>
Date: Thu, 03 Jul 2003 21:50:50 -0400
X-Message-Number: 14

>xxxxxxxxxxxxxxxxxx...Im trying to forward something, and it thinks its a
>quote! GRRRRR!
>
>Sorry, your message was not sent out to 'aprssig'.
>Your message quotes too many continuous lines of a previous message.
>
>You quoted 104 lines, and this mailing list is set to reject messages
>which quote more than 45 continuous lines of a previous message.
>
>Please resubmit your message, this time quoting fewer lines of the 
>previous message.
>
>---
>Here. Look it up yourself...
>
>>
>>
>>http://www.wired.com/news/wireless/0,1382,59460,00.html

---


END OF DIGEST


Read previous mail | Read next mail


 11.11.2026 06:08:28lGo back Go up