| |
ZL3AI > APRDIG 13.06.03 10:07l 319 Lines 9491 Bytes #999 (0) @ WW
BID : 1476-ZL3AI
Read: GUEST
Subj: TAPR Digest, Jun 10, 1/3
Path: DB0FHN<DB0RGB<DB0MRW<OK0PPL<RZ6HXA<SP7MGD<VK7AX<ZL2BAU<ZL3VML
Sent: 030612/1327Z @:ZL3VML.#80.NZL.OC #:2296 [Chch-NZ] FBB7.00i $:1476-ZL3AI
From: ZL3AI@ZL3VML.#80.NZL.OC
To : APRDIG@WW
TAPR APRS Special Interest Group Digest for Tuesday, June 10, 2003.
1. Re: replicating KISS ports under windows
2. PSK31
3. Warning....
4. Re: Warning....
5. Using your car as a sat digi
6. Re: replicating KISS ports under windows
7. RE: Updated list of APRS Servers
8. Re: Updated list of APRS Servers
9. RE: Connecting to a Ui-View Igate
10. Re: Warning....
11. Re: Warning....
12. ADMIN: Re: Warning....
13. Street Pilot 3 /Garmin in General query
14. Stand Alone Digi
15. Re: Street Pilot 3 /Garmin in General query
16. Re: Stand Alone Digi
17. Re: Stand Alone Digi
18. Re: Stand Alone Digi
19. Re: Stand Alone Digi
20. Re: Stand Alone Digi
21. Re: How do I get a Kenwood D7A(G) a GPS *and* PC {to talk to each othe}r
22. Re: Stand Alone Digi
23. Re: Stand Alone Digi
24. Re: Stand Alone Digi
25. WaypointXL
26. Where do I start?
----------------------------------------------------------------------
Subject: Re: replicating KISS ports under windows
From: Ralph Milnes <ralph.milnes@verizon.net>
Date: Tue, 10 Jun 2003 01:10:52 -0400
X-Message-Number: 1
Alex asked:
>Is anyone aware of a trick for windows to replicate (KISS) ports?
>
>Under Linux I used to use mkiss and kissattach to replicate data
>received from one port to another and vice versa, but Ihaven't found
>anything like that for Windows. I have a Windows95 setup running UI-View
>with a KPC3 in KISS mode. I'd like to share this TNC on another serial
>port. (AGWPE does not do this as far as I can tell).
I probably don't understand completely what you're trying to do, but if you
want one or more programs to share the data from one device, AGWPE *will*
do this. You can link scores of programs to one TNC/serial port.
http://www.elcom.gr/sv2agw/
Ralph KC2RLM
www.qsl.net/soundcardpacket/
----------------------------------------------------------------------
Subject: PSK31
From: Andrew Rich <andrew.rich@bigpond.com>
Date: 10 Jun 2003 20:16:02 +1000
X-Message-Number: 2
Hey what is a good program for PSK31 ?
I see PCSAT2 will fly with it onboard
--
Andrew Rich <andrew.rich@bigpond.com>
----------------------------------------------------------------------
Subject: Warning....
From: "Mike Yetsko" <myetsko@insydesw.com>
Date: Tue, 10 Jun 2003 06:49:51 -0400
X-Message-Number: 3
Not to start the virus discussion again... But be aware of a message from
"TAPR APRS Special Interest Group digest"
Evidently this message is targeted SPECIFICALLY at this group.
----------------------------------------------------------------------
Subject: Re: Warning....
From: Andrew Rich <andrew.rich@bigpond.com>
Date: Tue, 10 Jun 2003 21:03:02 +1000
X-Message-Number: 4
yeah, the fact it was an .scr file gave it away.
----------------------------------------------------------------------
Subject: Using your car as a sat digi
From: Andrew Rich <andrew.rich@bigpond.com>
Date: Tue, 10 Jun 2003 21:12:53 +1000
X-Message-Number: 5
I was reading on Bob's site about setting up a PM on the D700, so when a
sat comes up, it relays to the local aprs network.
Do you need to set any specific settings on the D700 ?
1. UIDIGI = ON
2. RXVER = 145.825
3. TXMITTER = 145.175 MHz
4. What about the path ? What does the D700 digipeat ?
--
Andrew Rich <andrew.rich@bigpond.com>
----------------------------------------------------------------------
Subject: Re: replicating KISS ports under windows
From: Alex <kr1st@amsat.org>
Date: Tue, 10 Jun 2003 07:39:58 -0400
X-Message-Number: 6
Hi Ralph,
Ralph Milnes wrote:
>I probably don't understand completely what you're trying to do, but if you
>want one or more programs to share the data from one device, AGWPE *will*
>do this.
AGWPE can connect several applications to the same IP port through IP
sockets. However, my application lives on a non-Windows platform without
an IP stack. I would like to connect that to my Winders box and have
that box provide me with the frames it hears from its TNC in KISS mode.
Are you, or anyone else, aware of any program that will replicate data
that comes from one KISS TNC and offers that to another serial port as
KISS frames and vice versa?
(and I'm not talking about digi software since it wouldn't forward
frames of which the path is exhausted)
73,
--Alex KR1ST
----------------------------------------------------------------------
Subject: RE: Updated list of APRS Servers
From: "Spider" <spider@rivcom.net>
Date: Tue, 10 Jun 2003 05:47:44 -0700
X-Message-Number: 7
Mark,
The APRS IS LIST is at http://www.ahubswe.net/aprs_stat.asp
And, the Auto Back-up for that list is at http://www.wa6oft.com/APRServe.txt
which is backed up twice daily.
Jim, WA6OFT
APRSFIRENET - www.dwrracesupport.com/fire
----------------------------------------------------------------------
Subject: Re: Updated list of APRS Servers
From: "Spider" <spider@rivcom.net>
Date: Tue, 10 Jun 2003 05:52:53 -0700
X-Message-Number: 8
Correction!
http://www.ahubswe.net/APRServe.txt is the Server list and it's back up is
http://www.wa6oft.com/APRServe.txt
Jim, WA6OFT
----------------------------------------------------------------------
Subject: RE: Connecting to a Ui-View Igate
From: "AE5PL Lists" <HamLists@ametx.com>
Date: Tue, 10 Jun 2003 08:07:23 -0500
X-Message-Number: 9
Hi Mike,
There is no need to connect directly to the IGates. Use javAPRS's
capability to specify a server filter command and connect to one of the
servers supporting port 14580. The filter command normally used will be
either the a (area) filter or the r (range) filter (or combination
thereof).
For more information, see http://javaprs.app.aprs-is.net and
http://www.aprs-is.net/aprsservers.htm
Hope this helps.
73,
Pete Loveall AE5PL
pete@ae5pl.net
----------------------------------------------------------------------
Subject: Re: Warning....
From: psschwarz@kellnet.com
Date: Tue, 10 Jun 2003 14:33:10 GMT
X-Message-Number: 10
Another variation just received this morning has the subject "[TenTec]
Honey" with a callsign as the sender.
Patrick...KB8RTZ...
----------------------------------------------------------------------
Subject: Re: Warning....
From: Dennis Hudson <n2lbt@n2lbt.com>
Date: Tue, 10 Jun 2003 10:27:23 -0400
X-Message-Number: 11
I think I'll turn off my virus protection and wait for the list to warn
me when I might be getting a virus attachment.
Enough already
----------------------------------------------------------------------
Subject: ADMIN: Re: Warning....
From: "stanzepa@earthlink.net" <stanzepa@earthlink.net>
Date: Tue, 10 Jun 2003 10:47:42 -0400
X-Message-Number: 12
Please take this off-topic discussion off the SIG.
Thank-you for your cooperation,
Stan, WA1LOU, SIG administrator
----------------------------------------------------------------------
Subject: Street Pilot 3 /Garmin in General query
From: Doug Bade <doug@clecom.com>
Date: Tue, 10 Jun 2003 11:41:51 -0400
X-Message-Number: 13
Can anyone point me to a list of Garmin GPS's which will allow the INPUT
of waypoints on the serial port and in what format nmea or garmin which it
needs???
My need is for the Street Pilot III or 176 type display... Anyone who has
been down this road with input , comments would be appreciated...
Doug KB8GVQ
----------------------------------------------------------------------
Subject: Stand Alone Digi
From: Bruce Douberley <bcdpe@innova.net>
Date: Tue, 10 Jun 2003 12:12:07 -0400
X-Message-Number: 14
Hi All,
I have been asked if there is a way to set up a stand alone digi. I guess
what he meant was with no computer and able to reboot after power
failure. He has an MFJ 1270. Any ideas appreciated. We need to setup a
"fill-in" digi to get us out of the hole in NW South Carolina. We have
"high mountain" digis reachable from home stations but mobile is dead.
Thanks.
73s,
Bruce
Bruce Douberley, WB4JNE
NNN0KBN SC
NNN0GBS FIVE/FOURTEEN SC
bcdpe@innova.net
----------------------------------------------------------------------
Subject: Re: Street Pilot 3 /Garmin in General query
From: "Kurt O. Jauss" <kf6hjo@earthlink.net>
Date: Tue, 10 Jun 2003 10:34:04 -0700
X-Message-Number: 15
I run a STREETPILOT III and use it with my D-700. Works great. On the
D-700 turn on Waypoints, make sure the GPS interface is set to NMEA and
your on your way.
----------------------------------------------------------------------
Subject: Re: Stand Alone Digi
From: "Dave Thege" <dthege@ncfcomm.com>
Date: Tue, 10 Jun 2003 12:48:50 -0500
X-Message-Number: 16
One way to get out of your hole would be to set the my alias parameter to
relay on the home stations. Then they would act as mini-digis getting your
mobiles to the high Digi. As for a standalone Digi I use the current
Kantronics KPC-3+. Once programmed put into operation and you won't need a
computer hooked up full time.
Dave N0XBN
----------------------------------------------------------------------
Subject: Re: Stand Alone Digi
From: Bruce Douberley <bcdpe@innova.net>
Date: Tue, 10 Jun 2003 14:06:31 -0400
X-Message-Number: 17
Dave,
That has been done, but since I seem to be the only one showing on the map
in this area, it is not adequate. I figured a KPC 3+ would do the trick,
but since he already has the 1270, the two of us hoped to be able to use
what he had. Was hoping a "fill in digi" might drum up some users in this
corner of the state.
Thanks.
73s,
Bruce
----------------------------------------------------------------------
Read previous mail | Read next mail
| |
