| |
ZL3AI > APRS 09.10.00 15:35l 224 Lines 7627 Bytes #999 (0) @ WW
BID : 33841_ZL3AI
Read: GUEST
Subj: TAPR Digest, Oct 06, 5/5
Path: DB0MRW<DB0ERF<DB0ROF<DB0CWS<DB0AIS<DB0NDK<DB0ACH<ON0RAT<ON0LVN<ON6AR<
WB0TAX<SV1AAW<IK6PYS<N8ZFM<ZL2TZE<ZL2TZE<ZL2WA<ZL2BAU<ZL3VML
Sent: 001007/1111Z @:ZL3VML.#80.NZL.OC #:42682 [Chch-NZ] FBB7.00g25 $:33841_ZL3
From: ZL3AI@ZL3VML.#80.NZL.OC
To : APRS@WW
>it doesn't display. I deleted the winaprs.cfg file and restarted, but it
>still didn't display.
>
>Does anyone have the solution?
You might go into the WINDOWS menu, and click on "RESET WINDOW
LOCATIONS", a little less than halfway down.
7 3
Earl
Earl Needham, KD5XB mailto:KD5XB@AMSAT.ORG
Clovis, New Mexico DM84jk N34d 25.446m W103d 12.700m (or so)
Pet peeve: breath is a noun, breathe is a verb (When you take a breath,
you breathe...)
----------------------------------------------------------------------
Subject: SUNSAT thoughts
From: Bob Bruninga <bruninga@nadn.navy.mil>
Date: Fri, 6 Oct 2000 19:34:18 -0400 (EDT)
X-Message-Number: 28
Fri Nite 1st SUNSAT (East coast) PACKET pass:
I gave it a GOOD honest try. Copied packets from horizon to horizon on
my HT whip. BUT only saw KB2WQM (who runs an OSCAR array) and KB8GVQ
mobile with a D700. I was beaconing away with 5w and 9600 throughout*.
Conclusion: 5w and a whip ain't workin at 9600 (I was acutally on L power
for the 1st half before I realized I was seeing the VHF "H" and my UHF
transmit side was actually on "L".
ALthough I have been using the HT on UO22 and SUNSAT mode J for the last 6
months and it works fine, remember that THIS EXPERIMENT is using mode B
which has a TREMENDOUS 2 meter downlink, but pays a 9dB penalty on the UHF
uplink. THus, 5 watts (at 9600 baud) just wont do it...
*** BUT *** remember that 1200 baud has a 7 dB advantage over 9600. SO,
on the NEXT packet pass, I will run 5w at 1200 baud on the 436.290 (-/+ 10
Khz) to see if that 7dB will make the difference... But being on 1200
baud, I will not be able to see my own successes, so I will try to get
another rig going or you can tell me if it works..
Bob, WB4APR
OOPS, since the next pass is voice, leave your rig on 145.825 9600
overnight and see if you capture me in the morning (I will be transmitting
during the early morning packet pass (kids swim meet))
----------------------------------------------------------------------
Subject: Re: SUNSAT thoughts
From: Bob Bruninga <bruninga@nadn.navy.mil>
Date: Fri, 6 Oct 2000 21:04:03 -0400 (EDT)
X-Message-Number: 29
On Fri, 6 Oct 2000, Dennis Hudson, N2LBT wrote:
> Also good copy here on KB2WQM and KB8GVQ. I was trying. Could you tell me
> the tuning rate for doppler on 430mhz? IE like at 5 minutes go to .285 and
> 10 minutes go to .290 etc
For an overhead pass, Start uplink on .280 then .285 after 3 mins, then
..290 for the central mins then .295 and then .300 at the end.
For a low east or west pass, you might just start on 285, then 290, then
295...
----------------------------------------------------------------------
Subject: RE: SUNSAT thoughts
From: "Scott-KC5JGV" <kc5jgv@arrl.net>
Date: Fri, 6 Oct 2000 20:17:49 -0700
X-Message-Number: 30
Well, I went outside on the voice pass just now, and it was a MESS! Nothing
but QRMing in this mode of store and forward. I had no chance of getting
through with my 5w on the D7A! Even those who did make it on where covered
up and very little was readable. They should do without this mode and go all
APRS! Will try on the next pass in a hour or so with packet.
73,
Scott
Need Help with APRS?
http://www.aprshelp.com
Need a 12v computer for APRS?
http://www.compu-comm.com
-----Original Message-----
From: bounce-aprssig-14464@lists.tapr.org
[mailto:bounce-aprssig-14464@lists.tapr.org]On Behalf Of Bob Bruninga
Sent: Friday, October 06, 2000 4:34 PM
To: TAPR APRS Special Interest Group
Cc: amsat-bb@amsat.org
Subject: [aprssig] SUNSAT thoughts
Fri Nite 1st SUNSAT (East coast) PACKET pass:
I gave it a GOOD honest try. Copied packets from horizon to horizon on
my HT whip. BUT only saw KB2WQM (who runs an OSCAR array) and KB8GVQ
mobile with a D700. I was beaconing away with 5w and 9600 throughout*.
Conclusion: 5w and a whip ain't workin at 9600 (I was acutally on L power
for the 1st half before I realized I was seeing the VHF "H" and my UHF
transmit side was actually on "L".
ALthough I have been using the HT on UO22 and SUNSAT mode J for the last 6
months and it works fine, remember that THIS EXPERIMENT is using mode B
which has a TREMENDOUS 2 meter downlink, but pays a 9dB penalty on the UHF
uplink. THus, 5 watts (at 9600 baud) just wont do it...
*** BUT *** remember that 1200 baud has a 7 dB advantage over 9600. SO,
on the NEXT packet pass, I will run 5w at 1200 baud on the 436.290 (-/+ 10
Khz) to see if that 7dB will make the difference... But being on 1200
baud, I will not be able to see my own successes, so I will try to get
another rig going or you can tell me if it works..
Bob, WB4APR
OOPS, since the next pass is voice, leave your rig on 145.825 9600
overnight and see if you capture me in the morning (I will be transmitting
during the early morning packet pass (kids swim meet))
---
You are currently subscribed to aprssig as: kc5jgv@arrl.net
To unsubscribe send a blank email to leave-aprssig-18700I@lists.tapr.org
Questions regarding the SIG go to the SIG administrator: wa1lou@tapr.org
----------------------------------------------------------------------
Subject: Kantronics Tracker and APRS
From: "Brian Frobisher" <froby@earthlink.net>
Date: Fri, 6 Oct 2000 19:09:31 -0700
X-Message-Number: 31
This is a multi-part message in MIME format.
------=_NextPart_000_0036_01C02FC8.F5455420
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
I have just purchased a Kantronics Tracker (Basically a KPC3+ with a =
built in Garmin GPS) and I am looking for a good source to help me =
educate myself with it's use along with the WinAPRS software that I have =
registered.
I notice that I am being asked to input my Lat and Long into the =
"Station" setting in the APRS software. Is there no way that the =
software can get that information automatically from the TNC/GPS unit? I =
would think so, but I am not sure. If I enter my home QTH as the Lat and =
Long in the "Station" setting in APRS does that change as I might move =
around or is that always a static location?
Any help would be greatly appreciated.
Thanks
------=_NextPart_000_0036_01C02FC8.F5455420
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 5.50.4207.2601" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT size=3D2>I have just purchased a Kantronics Tracker =
(Basically a KPC3+=20
with a built in Garmin GPS) and I am looking for a good source to help =
me=20
educate myself with it's use along with the WinAPRS software that I have =
registered.</FONT></DIV>
<DIV><FONT size=3D2></FONT> </DIV>
<DIV><FONT size=3D2>I notice that I am being asked to input my Lat and =
Long into=20
the "Station" setting in the APRS software. Is there no way that the =
software=20
can get that information automatically from the TNC/GPS unit? I would =
think so,=20
but I am not sure. If I enter my home QTH as the Lat and Long in the =
"Station"=20
setting in APRS does that change as I might move around or is that =
always a=20
static location?</FONT></DIV>
<DIV><FONT size=3D2></FONT> </DIV>
<DIV><FONT size=3D2>Any help would be greatly appreciated.</FONT></DIV>
<DIV><FONT size=3D2></FONT> </DIV>
<DIV><FONT size=3D2>Thanks</FONT></DIV></BODY></HTML>
------=_NextPart_000_0036_01C02FC8.F5455420--
---
END OF DIGEST
Read previous mail | Read next mail
| |