| |
ZL3AI > APRDIG 28.05.03 10:03l 162 Lines 5062 Bytes #999 (0) @ WW
BID : 1397-ZL3AI
Read: GUEST
Subj: TAPR Digest, May 25, 4/4
Path: DB0FHN<DB0RGB<OK0PPL<DB0RES<ON0AR<ZL2BAU<ZL3VML
Sent: 030527/1340Z @:ZL3VML.#80.NZL.OC #:1136 [Chch-NZ] FBB7.00i $:1397-ZL3AI
From: ZL3AI@ZL3VML.#80.NZL.OC
To : APRDIG@WW
Subject: Re: My wandering car
From: <owens@nysernet.org>
Date: Sun, 25 May 2003 17:30:10 -0400 (EDT)
X-Message-Number: 38
On Tue, 20 May 2003, Alex wrote:
>owens@nysernet.org wrote:
>
>>When I woke up this morning, I
>>discovered that the tracker thought I'd gone for a short drive:
>
>>As far as I know, the car was unmanned at that time
>
>Womanned perhaps? You married?
Yes, but N2UTE says that she was still asleep at that time ;)
Bill N2RKL
----------------------------------------------------------------------
Subject: RE: Garmin Rhino?
From: Alex <kr1st@amsat.org>
Date: Sun, 25 May 2003 01:32:33 -0400
X-Message-Number: 39
Spider wrote:
>I would suggest a re-read!
I did. You're right, it confirms my armchair status.
Nothing prevents attachments of any devices as long as it does not
extent the operating range of FRS.
73,
--Alex KR1ST (applying for lawnchair status)
----------------------------------------------------------------------
Subject: I-GATEing?
From: Robbie <mwrobertson@attbi.com>
Date: Sun, 25 May 2003 18:13:04 -0500
X-Message-Number: 40
I just started up WinAPRS v 2.51, and I see no where is my setup do I see
anything turned on to cause me to I-GATE any stations from RF to the
APRS-IS
I have been using WinAPRS for a few years now, and I am sure I NEVER
I-GATED anything! I used versions from 2.47 thru 2.72 and now this, :-)
What should I look for.. Nothing in Settings/TCPIP Connections/TCP Server
Settings is checked! But, I am connected to Second.aprs.net as I type and
went to findu and saw qAS,WA9INF for a neighbor of mine, n9gl-9
I will disconnect and restart now, but this is very strange to me, there
are enough i-gates around me...
Robbie, wa9inf
----------------------------------------------------------------------
Subject: Re: 'Gap Filler' digipeaters
From: "Joseph C. Bender" <n8xre@benderhome.net>
Date: Sun, 25 May 2003 20:10:07 -0400 (EDT)
X-Message-Number: 41
Henk,
That's pretty close to what I'm getting at. Plus, due to having baycom
modems and 386 laptops hanging around here for some reason (*grin*),
DIGI_NED is what I plan on working with.
I'm going to give it a try in the next week or two, I just need to get an
antenna mounted and coax in the house for this. Everything else is ready
to go. The experimenting will be with the RELAY at my house here
back-filling for the WIDE in this area and seeing what kinds of reception
I'll get while mobile, to see if the RELAY makes a difference. The major
obstruction around here is the general desense brought on by many local
commercial tower sites.
--
Joseph C. Bender
n8xre at benderhome net
----------------------------------------------------------------------
Subject: RE: Remote WX TNC settings needed
From: "Joe Dorn" <joedorn@stonemedia.com>
Date: Sun, 25 May 2003 21:02:50 -0500
X-Message-Number: 42
Without pulling out the catalog I don't recall what a MFJ 1270C is. I have
had a Peet U2K transmitting through a MFJ digital radio for about five
years with no problems. I got the settings from Peet Brothers. I would have
to go back in my files to find them but I would suggest you contact Peet
Brothers, very good support...
If I had it to do over again I would use another two-meter only radio with
more power and more uses at the about the same price but the combination
has worked well with no problems and no computer after setup.
You may check me out by going to:
http://www.findu.com/cgi-bin/wxpage.cgi?call=w5vex-1&radar=ewx&last=120
Joe Dorn, W5VEX, Belton, Texas
Temple Amateur Radio Club Emergency Coordinator
(254) 939-5918
Instructor & Mentor ARRL EC Courses (all levels)
Instructor USPS Weather Course
----------------------------------------------------------------------
[commercial content deleted]
----------------------------------------------------------------------
Subject: Re: I-GATEing?
From: "Dick Stanich" <dick@kb7zva.com>
Date: Sun, 25 May 2003 21:34:28
X-Message-Number: 44
That's the same problem we saw on one of our locals. If he had a TCP/IP
connection going and his RF setup. WinAPRS by default sends all local
traffic from what is heard on RF to the internet. Not sure if this is a bug
in the program, but it has worked that way for a long time.
It's like the 'Feed (echo) local data to TCP/IP' is broken. Makes no
difference if the box is checked or not, under APRS TCP Server settings.
This was a suspected problem with WinAPRS. The Q construct proves that the
problem exists. Maybe it will get fixed ;)
Dick, KB7ZVA
----------------------------------------------------------------------
Subject: Re: I-GATEing?
From: Robbie <mwrobertson@attbi.com>
Date: Sun, 25 May 2003 21:53:33 -0500
X-Message-Number: 45
Thanks Dick,
I beleive they fixed it as version 2.72 running under the same settings
does not i-gate Mic-E packets. Version 2.51 would i-gate only the one
station I mentioned that WAS using the TAPR Mic-E and I am hearing him
direct.
Learn something every day!
Robbie, wa9inf
---
END OF DIGEST
Read previous mail | Read next mail
| |
