| |
ZL3AI > APRS 08.10.00 18:10l 248 Lines 7794 Bytes #999 (0) @ WW
BID : 33817_ZL3AI
Read: GUEST
Subj: TAPR Digest, Oct 05, 2/4
Path: DB0MRW<DB0BOX<DB0ABH<DB0SRS<DB0AIS<DB0NDK<DB0ACH<ON0RAT<ON5VL<LX0HST<
HA3PG<VE1DRG<IK1ZNW<GB7CRV<GB7FUR<GB7FCR<GB7GCW<GB7BOB<GB7OAR<GB7OSP<
GB7BAY<ZL2TZE<ZL2TZE<ZL2WA<ZL2BAU<ZL3VML
Sent: 001006/0948Z @:ZL3VML.#80.NZL.OC #:42561 [Chch-NZ] FBB7.00g25 $:33817_ZL3
From: ZL3AI@ZL3VML.#80.NZL.OC
To : APRS@WW
------------------------------------------------------------------------------
-----------
----------------------------------------------------------------------
Subject: Re: ICOM 821H
From: Bill Vodall <wa7nwp@yahoo.com>
Date: Thu, 5 Oct 2000 13:29:38 -0700 (PDT)
X-Message-Number: 7
> --- Hamish Moffatt <hamish@cloud.net.au> wrote:
> > > Right now there seems to be a shortage of
> VHF/UHF
> > multimode
> > > transceivers
> > The FT-847 fills the void.. just buy it :-)
> >
> > Hamish, happy 847 owner.
Does the FT-847 do 9600 baud data? What's the
turn-around time between transmit and receive?
Bill - WA7NWP, happy IC821H owner.
__________________________________________________
Do You Yahoo!?
Yahoo! Photos - 35mm Quality Prints, Now Get 15 Free!
http://photos.yahoo.com/
----------------------------------------------------------------------
Subject: Rochester (NH) Hamfest
From: "Brian B. Riley" <brianbr@macconnect.com>
Date: Thu, 5 Oct 2000 16:33:08 -0400
X-Message-Number: 8
I will be travelling to the Rochester (NH) Hamfest tomorrow. I plan to
arrive at 4-5pm and leave 12 noon Saturday. As with last spring I will
leave my D700 (N1BQ-8) on at the hamfest as a digi. I will have my D7 as
well (N1BQ-7) though will probably run it on 147.52 MHz simplex, if
anyone wants to get together.
73 de brian
--
N1BQ-3 @ 44 31.73N 072 51.55W
WideN-N digi and weather station in Underhill Center, VT
<n1bq@amsat.org>
----------------------------------------------------------------------
Subject: Related but off topic
From: "Mike Yetsko" <myetsko@insydesw.com>
Date: Thu, 5 Oct 2000 16:35:28 -0400
X-Message-Number: 9
We recently had mention of the trucker who was exonerated from
a murder suspicion by the use of GPS.
Here's a story about a father recently convicted of killing his 9-year
old daughter. Caught with the aid of GPS.
http://www.cnn.com/2000/LAW/10/05/daughterslain.ap/index.html
----------------------------------------------------------------------
Subject: Re: ICOM 821H
From: Hamish Moffatt <hamish@cloud.net.au>
Date: Fri, 6 Oct 2000 08:32:11 +1100
X-Message-Number: 10
On Thu, Oct 05, 2000 at 01:29:38PM -0700, Bill Vodall wrote:
> Does the FT-847 do 9600 baud data? What's the
It does.
> turn-around time between transmit and receive?
I don't know, sorry. I haven't used it on 9600 yet.
Cheers,
Hamish
--
Hamish Moffatt VK3SB <hamish@debian.org> <hamish@cloud.net.au>
----------------------------------------------------------------------
Subject: RE: Rochester (NH) Hamfest
From: "Smith, Tim" <n1btq@ne.mediaone.net>
Date: Thu, 5 Oct 2000 18:07:45 -0400
X-Message-Number: 11
Brian said:
"I will be travelling to the Rochester (NH) Hamfest tomorrow. I plan to
arrive at 4-5pm and leave 12 noon Saturday. As with last spring I will
leave my D700 (N1BQ-8) on at the hamfest as a digi. I will have my D7 as
well (N1BQ-7) though will probably run it on 147.52 MHz simplex, if
anyone wants to get together."
-------------
I'll be there as N1BTQ-5 probably just as a tracker. Is 147.52 just for the
hamfest or will you be travelling in on 144.39? I'll switch over once I get
there. If you see my posit please stop by...I'd like to see the D7 up
close. I had to do a double-take on your call Brian...though it was a
bootleg for a minute! :-)
73,
Tim N1BTQ-5
Mattapoisett, MA
---
You are currently subscribed to aprssig as: n1btq@ne.mediaone.net
To unsubscribe send a blank email to leave-aprssig-18700I@lists.tapr.org
Questions regarding the SIG go to the SIG administrator: wa1lou@tapr.org
----------------------------------------------------------------------
Subject: Re: D-700/laptop
From: Bob Bruninga <bruninga@nadn.navy.mil>
Date: Thu, 5 Oct 2000 18:10:54 -0400 (EDT)
X-Message-Number: 12
On Thu, 5 Oct 2000 WA8LMF1@aol.com wrote:
> GPS data fed into the D700's minijack GPS input IS NOT echoed out the DB9
> data connector. You have to split the serial data output from the GPS and
> feed it in parallel into the D700 GPS input AND into the laptop DB9. Since
> the D700's GPS interface is normally listen-only (you actually only need TWO
> wires, data in and gnd/common) there is no conflict wiring it in parallel
> with the data-in side of the laptop's serial port.
Huhh? Yes the GPS data is echoed out when you set the proper GPS
command in the TNC. Since APRSdos does this automatically, I dont remeber
the command esactly, but any APRS software sshould do that automatically
as soon as you run APRS on your laptop and tell it you have a D700 or D7
connected.
de WB4APR, Bob
----------------------------------------------------------------------
Subject: Re: AVRS Tests working fine
From: Bob Bruninga <bruninga@nadn.navy.mil>
Date: Thu, 5 Oct 2000 18:47:36 -0400 (EDT)
X-Message-Number: 13
After two days of testing IVISIT as an audio/video conferenceing software
for linking a VOICE APRS conference for linking to radios in your area,
I'm hooked! Audio quality is excellent (better than radio). Can't
wait to hook it up to a radio on a simplex frequency so I can chat while I
am commuting. Have chatted with N2LBZ, HR2KOS, G0TRT, KC2EAW,W8DRO and
KG4EYO and others.
This is not to say that IVISIT is the answer (it is probably better for
linking ATV sites) but it has me hooked into persuing this audio
equivalent of APRServe that Steve pioneered for data. But no matter what
the software, the hardware interface to the radio is still only going to
be a VOX and a fail-safe timer...
> ...The concept of AVRS that I presented at DCC was a voice adjunct to
> APRS. You link a local radio channel to a sound card and use IVISIT to
> link the audio anywhere in the country. Initially, we just link
> everyone into the same QSO. Once that fills up, we spin off other
> channels and eventually arrive at a CELL phone concept where from my
> APRS mobile, I send an APRS message "CALL W3XYZ", and our local channel
> is connected to his anywhere on the planet and we can TALK.
To use IVISIT:
1) Go to IVISIT.COM and download the software
2) Install it, run it
3) Select ARTS-LEISURE, then double click on MY ROOMS, then HAMS
4) Then enter password of "cqcq" and you are in...
The links do not time out. Mine stays up all day. If anyone talks, I
hear it. Kinda neat...
de WB4APR, Bob
----------------------------------------------------------------------
Subject: SUNSAT Loud and Clear!
From: Bob Bruninga <bruninga@nadn.navy.mil>
Date: Thu, 5 Oct 2000 19:44:53 -0400 (EDT)
X-Message-Number: 14
Another Testimonial...
Tonight I was going to listen to SUNSAT on some of the $88 Alinco HT's
that we loan out to students to verify they can hear good enough, but
forgot something. Ran back inside with 1 HT in hand and 2 in pocket.
Running through the hallway at least 50 feet and 2 walls from the nearest
exterior wall and on the 1st floor of a 4 story concrete and steel
academic building with all chromium tinted windows, I could hear the
satellite!
Normally, I cannot even work the LOCAL repeater from inside this
building! Can barely even hear the repeater unless I find a hot spot.
But there was sunsat! This cleary demonstrates the 9 dB link
advantage of a 2m downlink (plus the added EIRP of sunsat).
Great work. Back outside I did get into the bird loud and clear (once)
with my 5W HT and 19" whip, though a QSO is impossible of course.
de WB4APR, Bob
----------------------------------------------------------------------
Subject: Re: ICOM 821H
From: Mark Fellhauer <sparkfel@primenet.com>
Date: Thu, 05 Oct 2000 19:17:02 -0500
X-Message-Number: 15
QST did two reviews of the FT-847 - both are available to ARRL members on
their web site.
Mark
KC7BXS
At 03:29 PM 10/5/00, Bill Vodall wrote:
>
Read previous mail | Read next mail
| |