OpenBCM V1.13 (Linux)

Packet Radio Mailbox

DB0FHN

[JN59NK Nuernberg]

 Login: GUEST





  
ZL3AI  > APRS     06.10.00 06:39l 175 Lines 5402 Bytes #999 (0) @ WW
BID : 33780_ZL3AI
Read: GUEST
Subj: TAPR Digest, Oct 03, 2/2
Path: DB0MRW<DB0SON<DB0SIF<DB0AIS<DB0ZDF<DB0GE<LX0PAC<LX0HST<HA3PG<VE1DRG<
      VK3BBS<VK2CZR<VK2IO<VK2GJB<ZL2TZE<ZL2TZE<ZL2WA<ZL2BAU<ZL3VML
Sent: 001004/0945Z @:ZL3VML.#80.NZL.OC #:42392 [Chch-NZ] FBB7.00g25 $:33780_ZL3
From: ZL3AI@ZL3VML.#80.NZL.OC
To  : APRS@WW


From: "Henk de Groot" <henk.de.groot@hetnet.nl>
Date: Tue, 3 Oct 2000 22:34:04 +0200
X-Message-Number: 5

> The only negative I have on this approach is power.  My KPC sips lightly
at
> the flower of power, but a PC swallows juice like a 747 on takeoff.

And this also accurately illustrates the performance difference between the
two... DIGI_NED gives your Digipeater wings. Feel the thrust! This software
realy flies!

Kind regards,

Henk.

[ Note: You may even consume LESS power in your complete installation
because DIGI_NED avoids a lot of redudant transmissions - which cuts-back
the power consumption of your 50 Watt transmitter and reduces QRM. (I think
you can also run DIGI_NED on those small battery powered HP 286 handheld
PC's...) ]



----------------------------------------------------------------------

Subject: "Tiered" aliasing for digis
From: "Jim Gill" <gillj@uswest.net>
Date: Tue, 3 Oct 2000 16:02:11 -0500
X-Message-Number: 6

Do any of the computer-as-a-digi programs offer, for lack of a better term,
"tiered" aliasing for digis?  For example, I see some of the digis in
Oklahoma sending to a path of OK2-2 (or something along those lines).

You might, in order to specifically limit propagation of certain packets,
want to have multiple "tiers", starting with a metropolitan area, then
state, then region, etc, like

OMA
NE
MW  for midwest

Each digipeater (running on a PC) might then be configured with the
applicable aliases for its' location.  A digi in Omaha might have all three
aliases, but one nearby in Iowa would have IA and MW instead, etc.  All
digis would of course retain standard RELAY WIDE TRACE aliasing, etc.  A
packet launched by a fixed or mobile station with the path of APRS V NE2-2
would then go out two hops but not cross state lines, or maybe APRS V MW4-4
for 4 hops, but not out of a pre-defined "region", etc. (for RF purposes
only)

How many aliases can the different digi software versions support, and is
there any merit to expanding this idea going forward?

Thanks,
Jim  N0RMO
Omaha, NE


----------------------------------------------------------------------

Subject: SUNSAT in HT APRS mode!
From: Bob Bruninga <bruninga@nadn.navy.mil>
Date: Tue, 3 Oct 2000 17:50:10 -0400 (EDT)
X-Message-Number: 7

Sunsat is in APRS mode on 145.825 and the downlink is bodacious!  It is
lighting all of the Smeter LCD's on my THD7 with no preamp 1730 EDT.

It is 9600 baud so it sounds just like a noise burst every 10 seconds.
The entire pass, I saw no one but me...  You will see SUNSAT ?? for the
telemetry packets, but once a minute you will capture a brief STATUS
packet. (and anyone else that digipeats APRS at any time!)

Next pass is about 7 PM EDT or 6 PM CDT etc...  And then again at about
2030.  Starting tomorrow the central USA pass (usually voice) will be
in PARROT mode.  Transmit and listen on 145.825 voice..  But all other
passes are APRS!  (It also comes over in the morning between about 5 to 9
AM your local time too)...

Uplink is 436.290 +/1 10 KHz doppler.  Use either 9600 baud or 1200
baud. But downlink is always at 9600 baud.  TUrn on your THD7 or D700 on
145.825 in 9600 baud and enjoy!  (Only the D7(G) can operate APRS mode at
9600).  But either rig with a laptop can work 9600 baud in PACKET Mode.

This is MODE B which means it is 10 dB stronger than ANY OTEHR current
packet downlink, so you can hear it on a rubber duck.  No excuse not to
try it...

for details http://web.usna.navy.mil/~bruninga/astars.html

de WB4APR, Bob

SINCE NO TRACKING/TUNING is required on the 2m dowlink, just set your D7
or D700 up in the car and see what it captures...



----------------------------------------------------------------------

Subject: Garmin 12MAP NEMA input
From: RWendel@aol.com
Date: Tue, 3 Oct 2000 18:42:58 EDT
X-Message-Number: 8

For anyone interested, I also inquired about the 12MAP capability on 
accepting NEMA inputs from external devices.
Keith from Garmin wrote:
"...the GPS 12 MAP will accept NEMA sentences from
external devices.  I tested the 12 MAP and it transferred the data."

I thought it would be nice to view locations of other APRS'ers on my Garmin 
but the KPC 3+ apparently doesn't output NEMA...only input.  Darn.

Randy km0d

----------------------------------------------------------------------

Subject: Distribution list
From: "Robert Greene" <kb7usn@worldnet.att.net>
Date: Tue, 3 Oct 2000 15:44:05 -0700
X-Message-Number: 9

Sir:  Please put kb7usn@att.net on the aprssig distributuion list. Tnx Bob


----------------------------------------------------------------------

Subject: Re:  SUNSAT in HT APRS mode!
From: Mark Fellhauer <sparkfel@primenet.com>
Date: Tue, 03 Oct 2000 18:57:04 -0500
X-Message-Number: 10

What packet path should we use to digipeat thru it?

73,

Mark
KC7BXS

At 04:50 PM 10/3/00, Bob Bruninga wrote:

>Sunsat is in APRS mode on 145.825 and the downlink is bodacious!  It is
>lighting all of the Smeter LCD's on my THD7 with no preamp 1730 EDT.


----------------------------------------------------------------------

Subject: Re:  SUNSAT in HT APRS mode!
From: Bob Bruninga <bruninga@nadn.navy.mil>
Date: Tue, 3 Oct 2000 20:08:30 -0400 (EDT)
X-Message-Number: 11

On Tue, 3 Oct 2000, Mark Fellhauer wrote:

> What packet path should we use to digipeat thru it?

APRS VIA SUNSAT

Bob





---

END OF DIGEST



Read previous mail | Read next mail


 17.11.2026 19:57:03lGo back Go up