OpenBCM V1.13 (Linux)

Packet Radio Mailbox

DB0FHN

[JN59NK Nuernberg]

 Login: GUEST





  
ZL3AI  > APRS     04.10.00 12:33l 154 Lines 7658 Bytes #999 (0) @ WW
BID : 33754_ZL3AI
Read: GUEST
Subj: TAPR Digest, Oct 01, 4/7
Path: DB0MRW<DB0RGB<OK0PPL<OK0POK<9A0YRB<VK6BBS<VK2TGB<VK2IO<VK2GJB<ZL2TZE<
      ZL2TZE<ZL2WA<ZL2BAU<ZL3VML
Sent: 001002/0952Z @:ZL3VML.#80.NZL.OC #:42079 [Chch-NZ] FBB7.00g25 $:33754_ZL3
From: ZL3AI@ZL3VML.#80.NZL.OC
To  : APRS@WW


can I do this in the field with no computer and no GPS?  How can I set a
beacon to give the location of where I plan to be ahead of time.  Can
the proper information be set in the the "btext" of the modem and will
APRS systems recognize this?  Should the modem be in "k" mode to the
packet is sent as UI?  I have the AX.25 protocol book but have a little
trouble grasping the whole idea, I think I read too much of a good thing
and went into brain freeze.  I do have two computers, two modems and two
radios with no GPS (yet!), and I will have APRSDOS send information and
analyze the data it sends in hopes of figuring it out, but can any of
you help with a little information or insight in case I am on the wrong
track?

Kurt

-- 
Ross Technologies Signals Intelligence Division
Facility 406- Hells' Laboratory

Radio Stations KD7JYK / KK7RC
Monitor Station Registry KCA6ABB
Eagle Valley, Nevada
Somewhere In Sector DM09
--------------------------------------------------------------------------------
------------
The information transmitted is intended only for the person or entity to
which it is addressed 
and may contain confidential and/or privileged material. Any review,
retransmission, 
dissemination or other use of, or taking of any action in reliance upon,
this information by
persons or entities other than the intended recipient is prohibited. If
you received this in error,
please contact the sender and delete the material from any computer.

----------------------------------------------------------------------

Subject: Re:  KPC3+ not updating in GPS mode
From: Mark Fellhauer <sparkfel@primenet.com>
Date: Sun, 01 Oct 2000 15:54:44 -0500
X-Message-Number: 14

Yup, that was it.   It's been so long since I pulled the TNC out of my car 
and done anything with it, I totally forgot that using the software  port 
precludes the use of INT=GPS.   Boy, do I feel stupid.   But I knew it was 
something simple.

Thanks,

Mark
KC7BXS


At 02:22 AM 10/1/00, Jim Gill wrote:

>AFAIK, the GPS has to be plugged into the "main" (hardware) serial port (not
>the "software" serial port) for GPS mode to work.  When you go to terminal
>mode, it is then able to read from the software port.


----------------------------------------------------------------------

Subject: RE:  Old motherboards for free
From: Mark Fellhauer <sparkfel@primenet.com>
Date: Sun, 01 Oct 2000 17:14:51 -0500
X-Message-Number: 15

At 11:10 AM 10/1/00, RMckni8527@aol.com wrote:

>But when you drive for hours to get to a decent Hamfest then all you
>find are tables full of cheap tools, dolls, jewelry, and CB's, you start to
>get turned off by wasting your whole day and all that expensive gas.  I like
>finding unexpected bargains, but when you hardly can find ANY ham gear, it's
>bad.  A lot of dealers are not making the effort any more because the folks
>with the money in hand ready to buy a real HAM radio just aren't showing up.
>eBay has replaced Dayton as the largest Hamfest.

I had plenty of radio gear at the hamfest along with the computers.   I 
have not found eBay to be a reliable place to purchase ham radio gear as 
most of the people there selling equipment don't even seem to be 
hams.    At the Hamfest, we had a 12 volt power supply and an antenna so 
that all our transceivers for sale could be powered on and 
tested.   Something you can't do on eBay.   I have also found that the 
minimums on eBay to be OUTRAGEOUS.   I was recently looking to buy an 
SB-1400 or FT-747 and found that I could drive to Burqhardt's in Watertown 
and get a better deal than ANY on eBay.

>How many people want to stand out in the
>blazing sun or pouring rain all day holding a tarp over their TS-950?  Few
>Hamfest committees give much thought to the swap'ers and don't select
>facilities which cater to their needs.  Only a few Hamfests are really well
>organized for outdoor swap areas.  Most clubs are worried about their bottom
>line and try and sell as many commercial tables as possible.  When a 6 ft
>table costs $40+ each, then you have to pay a union electrician or city
>employee $100 just to plug in your extension cord, I start staying home.

You've answered your own question.  If you hold a hamfest in many indoor 
venues, the owner of that property sets the rules.   Many states have laws 
set to favor union shops and require a union electrician to handle the 
hookups.  That is TOTALLY out of the hands of the people who set up the 
hamfest or convention.   Many years ago I was the head caddie for many ACBL 
(American Contract Bridge League) events and I had to deal with this on a 
constant basis.   In one instance, we had a very large convention center 
filling with cigarette smoke (back when they allowed smoking).  I called 
the manager and asked if there was something that could be done about it, 
so an in-house electrician was sent over to look at the situation.  He 
looked at the main breaker panel, and stated, "There's the problem, the 
main ventilating fans are not turned on."  We'll turn them on," I 
exclaimed.   "Can't, only the MASTER electrician is allowed to flip these 
breakers!" was his response.   I was then told the master electrician was 
not on the premises and it would be some time before he returned (like the 
next day).  I asked if he was to turn his back and the breakers just 
magically flipped themselves on - would that be OK?  At that point he 
became indignant, slammed the electrical panel shut and locked it!   He 
then sauntered away.  Well I went to the manager's office and told him we 
would not be having any more conventions in his hotel because of the 
situation.    The master electrician showed up pretty quickly after 
that...   God, I love unions.

>Some facilities are so bad they won't allow a seller to bring a lunch or
>thermos, they demand you buy from the concession stand!

See above.  In many states unions set the rules.  In many hotels/civic 
centers we were charged $150 to $200 per 100 cup coffee urn (and this was 
15 years ago).  I won't even say how much a keg of beer set us back (and we 
had to have a convention center supplied union bartender).   And if we 
served alcohol we also generally had to hire a security guard.  And the 
people who bought the coffee complained when we charged 50 cents per cup to 
help defray some costs.  It got so bad we moved many smaller events to 
private venues like country clubs and dance halls.  We saved so much money 
that we offered FREE concessions like coffee, tea, and donuts.  We usually 
charged 25 cents for a can of pop that was ice cold.

Having been the Chairman of WestFest for three years I doubt many people in 
the ham community know how much effort and planning goes into bringing off 
any hamfest.   We have outdoor hamfests because that allows us to hold 
costs down.  If you want electricity, bring a generator or a big battery - 
or hook up an inverter to your car...  If your worried about weather - 
bring a canopy.

As the chairman of WestFest, I always had several points that had to be 
met.  Admission to our outdoor hamfest was always FREE.  Parking per 
vehicle, no matter how large was just a few dollars.   If you wanted to 
park off site or ride your bike to the event that was OK by 
me.   Concessions had to be inexpensive.  No five dollar hotdogs or four 
dollar cokes.  And industrious tail-gaters could sell food and drink if 
they wanted to.  Tailgaiting was a fixed price per spot - commercial or 
not.    Ham Radio Clubs or Public Service Oganizations got free space at 
the hamfest - provided that it was to distrubute flyers and such - if they 



Read previous mail | Read next mail


 17.11.2026 20:20:53lGo back Go up