| |
ZL3AI > APRDIG 04.05.03 18:54l 280 Lines 9362 Bytes #999 (0) @ WW
BID : 1227-ZL3AI
Read: GUEST
Subj: TAPR Digest, Apr 25, 1/3
Path: DB0FHN<DB0ZWI<DB0CHZ<DB0ERF<DB0MRW<OK0PKL<OK0PPL<RZ6HXA<SP7MGD<VK7AX<
ZL2BAU<ZL3VML
Sent: 030428/1411Z @:ZL3VML.#80.NZL.OC #:64764 [Chch-NZ] FBB7.00i $:1227-ZL3AI
From: ZL3AI@ZL3VML.#80.NZL.OC
To : APRDIG@WW
TAPR APRS Special Interest Group Digest for Friday, April 25, 2003.
1. RE: Still looking for solution...
2. Re: Just trying to understand.
3. Out Of Memory
4. Re: Alinco DR-135TP
5. Lesson needs to be learned in VA
6. Re: Alinco DR-135TP
7. Re: Alinco DR-135TP
8. Re: Out Of Memory
9. Re: Lesson needs to be learned in VA
10. Re: Alinco DR-135TP
11. Re: Alinco DR-135TP
12. Re: Another thing I'd like to see...
13. Re: Lesson needs to be learned in VA
14. Re: Another thing I'd like to see...
15. Re: Another thing I'd like to see...
16. Re: Another thing I'd like to see...
17. Running Multiple COM ports from a one port Laptop
18. Re: [ "Curt Mills, WE7U" ] Re: Another thing I'd like to see...
19. RE: Running Multiple COM ports from a one port Laptop
20. Re: Another thing I'd like to see...
21. Mini ITX
22. RE: Mini ITX
23. RE: Mini ITX
<LYR26300-130070-2003.04.25-15.48.30--brown#brauhausdc.org@lists.tapr.org>
24. RE: Mini ITX
<LYR26300-130070-2003.04.25-15.48.30-- brown#brauhausdc.org@lists.tapr.org>
25. PCSAT2 on the air
26. Re: PCSAT2 on the air
27. Ver.2: Another thing I'd like to see...
28. Re: Lesson needs to be learned in VA
----------------------------------------------------------------------
Subject: RE: Still looking for solution...
From: "Darryl Smith" <Darryl@radio-active.net.au>
Date: Fri, 25 Apr 2003 14:22:58 +1000
X-Message-Number: 1
G'Day All.
Jim Duncan noted
>After the resets the radio does NOT try to open the TNC but if I hold
>the function key in order
>to access the TNC I can't get past the APRS mode....still stuck in
>"Opening TNC".... any hit on
>the TNC button after this results in the "huh? you can't do THAT" beep.
OK... I have a solution for that. Open up your D700, The side with the
serial number. Now, examine the PCB near the green wire that you can cut
for some extended transmit - just near the DB9. On one of mine there was
a black felt thing stuck to the PCB. Remove it. Now clean in that area
with some electrical cleaning solvent.
That fixed one of my D700's that was playing up.
Darryl
---------
Darryl Smith, VK2TDS POBox 169 Ingleburn NSW 2565 Australia
Mobile Number 0412 929 634 [+61 4 12 929 634 International]
Darryl@radio-active.net.au | www.radio-active.net.au
----------------------------------------------------------------------
Subject: Re: Just trying to understand.
From: tvsjr <tvsjr@sprynet.com>
Date: Thu, 24 Apr 2003 23:41:23 -0500
X-Message-Number: 2
Fresh from FindU:
(just some samples)
W8APR>APZ020,N8EMZ-3*,TRACE6-6,qAO,KC8OBZ:=3940.78NN08409.61W#PHG5360/DIGI_NED:
W8APR (MVFMA) Dayton, Ohio
W8APR>APZ020,WIDE,TRACE6-6,qAR,WB8NUT:=3940.78NN08409.61W#PHG5360/DIGI_NED:
W8APR (MVFMA) Dayton, Ohio
W8APR>APZ020,WIDE,TRACE6-6,qAO,KC8OBZ:=3940.78NN08409.61W#PHG5360/DIGI_NED:
W8APR (MVFMA) Dayton, Ohio
W8APR>APZ020,KB9UQQ-10,KC6ETE-3,K9OPO-3,K9TNW-10*,TRACE6-3,qAR,K9RAG-1:=3940.780
NN8409.61W#PHG5360/DIGI_NED:
W8APR (MVFMA) Dayton, Ohio
W8APR>APZ020,W8MWO,KD4EVB-10*,TRACE6-5,qAR,WB8NUT:=3940.78NN08409.61W#PHG5360/DI
IG_NED:
W8APR (MVFMA) Dayton, Ohio
W8APR>APZ020,W8MWO,AB4WS-10*,TRACE6-5,qAo,K9SOA:=3940.78NN08409.61W#PHG5360/DIGN
I_ED:
W8APR (MVFMA) Dayton, Ohio
W8APR>APZ020,KI6SZ-2,W8MAP-4*,TRACE6-5,qAO,KC8OBZ:=3940.78NN08409.61W#PHG5360/DI
IG_NED:
W8APR (MVFMA) Dayton, Ohio
W8APR>APZ020,WIDE,N8EMZ-3,W8MAP-4*,TRACE6-4,qAO,KC8OBZ:=3940.78NN08409.61W#PHG50
36/DIGI_NED:
W8APR (MVFMA) Dayton, Ohio
http://www.findu.com/cgi-bin/rawposit.cgi?call=w8apr
73s,
Terry/N5RSE
----------------------------------------------------------------------
Subject: Out Of Memory
From: JD Delancy <W1JD@drix.net>
Date: Fri, 25 Apr 2003 00:42:32 -0400
X-Message-Number: 3
A while back someone published a change to the aprserve file to cure the
"out of memory station list" error. Anyone remember what that change was?
----------------------------------------------------------------------
Subject: Re: Alinco DR-135TP
From: "Curt Mills, WE7U" <archer@eskimo.com>
Date: Thu, 24 Apr 2003 21:25:23 -0700 (PDT)
X-Message-Number: 4
On Thu, 24 Apr 2003 ik7565@erols.com wrote:
>I've heard conflicting reports on whether the Alinco DR-135TP will
>digipeat with the internal TNC. Any helpful advice?
I contacted the company when they first came out, asking specifically
whether it could RELAY digipeat. They said that function was not in
there, and that they didn't have a lot of room to add it.
Perhaps they may have changed something since the initial product
introduction. Check the manual on-line, which is what I did.
Curt, WE7U. archer@eskimo.com
http://www.eskimo.com/~archer
Lotto: A tax on people who are bad at math. - unknown
Windows: Microsoft's tax on computer illiterates. - WE7U.
The world DOES revolve around me: I picked the coordinate system!"
----------------------------------------------------------------------
Subject: Lesson needs to be learned in VA
From: Roger Grady <k9opo@comteck.com>
Date: Fri, 25 Apr 2003 01:12:48 -0500
X-Message-Number: 5
A few minutes ago a packet arrived in N. Central Indiana from a digi in
Western VA, using a path of RELAY,WIDE7-7. I just sent the operator an email.
Roger Grady K9OPO
----------------------------------------------------------------------
Subject: Re: Alinco DR-135TP
From: "chris rose" <kb8uih2@chartermi.net>
Date: Fri, 25 Apr 2003 06:27:23 -0400
X-Message-Number: 6
Has anyone found out if external control from a terminal program or APRS
client software will make it digi?
Chris
KB8UIH
----------------------------------------------------------------------
Subject: Re: Alinco DR-135TP
From: "hasan schiers" <schiers@netins.net>
Date: Fri, 25 Apr 2003 07:19:50 -0500
X-Message-Number: 7
If I understand your question correctly, as soon as you run aprs client
software, then what is or isn't digipeated is handled by the software...at
least it is in UI-View32 which has smart digi (wideN-N and traceN-N) and
multiple alias suppport. The disadvantage of this is you have to have a
computer connected to the radio/tnc combo all the time or you lose digi.
APRS+SA has some rudimentary digi support (single alias)
UI-View32 supports multiple alias's (as many as you can dream up, as well as
the wideN-N and traceN-N mentioned above.)
If you are using the DR-135 as a home station only, with UI-View32, then I
think you would be fine (and be very happy with the software). If you are
going mobile, you're stuck with a laptop to do the heavy lifting.
....hasan, N0AN
----------------------------------------------------------------------
Subject: Re: Out Of Memory
From: Mark Sproul <msproul@jove.rutgers.edu>
Date: Fri, 25 Apr 2003 09:52:54 -0400
X-Message-Number: 8
This sounds like you are talking about WinAPRS, the solution is to create a
file called MEMORY.TXT and put it in STATIONS n where n is the max number
of stations you want.
refer to http://www.winaprs.com/WAPRSdoc.htm#memory.txt
For more details
Mark
------------------------------------------------------------------
Mark Sproul |
http://ecs.rutgers.edu |
msproul@jove.rutgers.edu |
Manager - Engineering Computing Services | 732-445-3121
Rutgers University School of Engineering |
Eng D111 |
------------------------------------------------------------------
----------------------------------------------------------------------
Subject: Re: Lesson needs to be learned in VA
From: "Jason Rausch" <ke4nyv@msn.com>
Date: Fri, 25 Apr 2003 9:15:19
X-Message-Number: 9
Which digipeater is it? There has been statewide attempts to avoid things
like this. I live in the western half of the state so I MIGHT know who it
is.
73's
Jason KE4NYV
Roanoke, Virginia.
www.ke4nyv.com
----------------------------------------------------------------------
Subject: Re: Alinco DR-135TP
From: "Jason Rausch" <ke4nyv@msn.com>
Date: Fri, 25 Apr 2003 9:19:29
X-Message-Number: 10
Why not take one of the simple DOS smart-digi programs and port over to a
PIC. Obviously it would have to be set up ahead of time and then have the
HEX burned to the chip. But wouldn't this be feasable? I am too good with
PIC programming yet, but I might take a stab at this sometime.
73's
Jason KE4NYV
www.ke4nyv.com
----------------------------------------------------------------------
Subject: Re: Alinco DR-135TP
From: "Jason Rausch" <ke4nyv@msn.com>
Date: Fri, 25 Apr 2003 9:22:22
X-Message-Number: 11
Meant to say NOT too good at PIC programming yet :o)
73's
Jason KE4NYV
www.ke4nyv.com
----------------------------------------------------------------------
Subject: Re: Another thing I'd like to see...
From: Miller Scott Contr 30SCS/FTI <Scott.Miller@vandenberg.af.mil>
Date: Fri, 25 Apr 2003 15:49:15 -0000
X-Message-Number: 12
Roadkill... now there's a symbol I forgot to put in the set. =] Maybe
break it down into dead armadillo, flat cat, dog with a tire tread...
This sort of tagging is easy to do with a Trimble unit, and I think that's
what they were doing for the shuttle debris. Again, if your WIDE digi had
the ability to store reports, you could just transmit the objects until you
saw the WIDE pick them up, and then be fairly sure they'd get through.
Scott
N1VG
----------------------------------------------------------------------
Read previous mail | Read next mail
| |
