| |
ZL3AI > APRS 03.10.00 14:14l 194 Lines 7207 Bytes #999 (0) @ WW
BID : 33717_ZL3AI
Read: GUEST
Subj: TAPR Digest, Sep 29, 2/4
Path: DB0MRW<DB0HOT<DB0ERF<DB0FBB<DB0GOS<DB0OE<DB0QS<DB0ACC<ON0RAT<ON5VL<
LX0HST<HA3PG<WB0TAX<KP4IG<F8PTT<N2BQF<ZS6RO<ZL3VML
Sent: 001001/0351Z @:ZL3VML.#80.NZL.OC #:41941 [Chch-NZ] FBB7.00g25 $:33717_ZL3
From: ZL3AI@ZL3VML.#80.NZL.OC
To : APRS@WW
This would not be a difficult feature to implement, a simple script to
process emails coming into a special account, a good starter project for
someone to undertake.
Steve K4HG
----------------------------------------------------------------------
Subject: Re: FRS MOD ?
From: tarnerich@in-situ.com (Tony Arnerich)
Date: Fri, 29 Sep 2000 10:10:40 -0600
X-Message-Number: 8
"Denis G. Barton" <wb8skp@upmail.com> asked:
>With all this talk about usind the FRS Radios, has anyone tryed to move them
>down
>to our 440MHz band?
Seems like a ton of work for not enough reward. The firmware and the LCD
hardware are oriented towards a channel number instead of an actual frequency
readout, and you'd also want to add in duplex operation. Since my ICOM 4008
FRS's are close siblings of the Alinco DJ-S41 440 rig at the same price, I'm
inclined to think that there's little to solve here beyond curiosity. Just my
$0.02. FYI, the Alinco's receiving range can be expanded to where it covers
FRS. The 2.5 kHz offset from the oddball FRS channel definitions isn't too
bad of a problem for good signals, I've found them to be quite readable.
That's how far off (on average during the pass) TH-D7 users are when working
satellites.
73,
Tony KD7TA
----------------------------------------------------------------------
Subject: P3D
From: "Sadowski, Allan" <allan.sadowski@ncshp.org>
Date: Fri, 29 Sep 2000 14:04:40 -0400
X-Message-Number: 9
Though tentative... the following was posted on the Ariane Web Site
Flight 133 6 Oct
*********** FLIGHT 135 31 OCT !!! P3D is a payload
How might APRS use P3D ????
ALOHA
AH6LS
----------------------------------------------------------------------
Subject: TAPR Press Release
From: John Ackermann <jra@febo.com>
Date: Fri, 29 Sep 2000 14:15:56 -0400
X-Message-Number: 10
(Sorry if any of you get this twice -- mailing problems the first time around.)
FOR IMMEDIATE RELEASE
TAPR Elects Officers at 19th Annual Digital Communications Conference
John Ackermann, N8UR, was elected the new president of TAPR at the 19th
ARRL/TAPR Digital Communications Conference held in Orlando September 21-24.
135 hams, including a dozen from outside the US, attended the annual event,
which includes presentation of technical papers, hands-on demonstrations,
and beginner's sessions. Over 100 people attended Friday afternoon's APRS
seminar, and 70 were present for a technical symposium on programming PIC
chips held Sunday morning.
Ackermann succeeds Greg Jones, WD5IVD, who had served as president since
1993, with Steve Bible, N7HPR, replacing Ackermann as vice president. Bob
Hanson, N2GDE, will continue to serve as secretary, and Jim Neely, WA5LHS,
remains treasurer. The elections were held at TAPR's annual board meeting,
held in conjunction with the DCC.
"Greg Jones led TAPR through a period of growth and innovation,"
Ackermann said. "On his watch, we brought significant new products to
market, including the DSP-93 digital signal processing unit, Totally
Accurate Clock, and Mic-E and Pic-E data encoders. Greg also laid the
groundwork for our Frequency Hopping Spread Spectrum Radio project. He
guided us into the Internet age, along the way creating the TAPR SIG
mailing lists that now handle thousands of messages per month. Greg is
also responsible for our increased publishing activities. His retirement
leaves a void in TAPR that will be hard to fill."
Ackermann said that his primary objective will be to ensure that TAPR
remains on the cutting edge of radio technology, with a special
emphasis on emerging concepts such as Software Defined Radios. He will
also focus on increasing membership and optimizing the organization's
management structure.
Ackermann (ex-AG9V), who lives in Dayton, Ohio, has served on the TAPR
Board of Directors and as vice president since 1995. He was first licensed
in 1974 and has helped build packet radio networks in Ohio and Wisconsin.
Ackermann is active on APRS, runs a Linux-based Internet site at his home,
and can occasionally be found on CW chasing DX.
Bible lives in Kingsland, Georgia, and has been a TAPR Board member since
1996. He was project manager for TAPR's Totally Accurate Clock (TAC-2),
EVM Radio Interface, PIC Encoder, and DGPS Reference Station kits. Bible
is leading TAPR's development of a road map to develop Software Defined
Radio technology for amateur use.
In other news from the DCC:
* TAPR announced that it will be offering the "EasyTrak" satellite rotor
and radio controller. This PIC-based unit will control azimuth and
elevation rotors for satellite use, as well as tune popular radios for
Doppler correction.
* PRUG, the Packet Radio Users Group of Japan, demonstrated the
possibilities of low cost Internet-connected sensors and software mobile
agent technology. PRUG also introduced the TINI-AMEDES, a Java based
one-board computer with Ethernet interface which supports the Dallas
Semiconductor 1-wire interface, and provided an update on their 2.4Ghz
spread spectrum radio, which has been commercialized by Root, Inc.
* Geoffrey Dick, WA4IKQ, was winner of the grand prize awarded at the
Saturday evening banquet. Geoff won a TM-D700 APRS-capable mobile radio
donated by Kenwood.
DCC 2001 will be held in Cincinnati, Ohio from September 21-23, 2001.
Conference coordinators will be Steve and Sheila Bible assisted by local
coordinator Hank Greeb, N8XX.
About TAPR
TAPR (officially, Tucson Amateur Packet Radio, Inc.) is a non-profit
research and development corporation dedicated to advancing amateur
radio through digital technology. It focuses on development of
hardware and software tools that enable ham radio operators to explore
leading edge technologies. Despite its name, TAPR is an international
organization with over 2000 members worldwide.
Contact information:
Telephone: (940) 383-0000
Email: tapr@tapr.org
Web: http://www.tapr.org
----------------------------------------------------------------------
Subject: Re: FRS MOD ?
From: "Smith, Tim" <n1btq@ne.mediaone.net>
Date: Fri, 29 Sep 2000 14:18:21 -0400
X-Message-Number: 11
>FRS's are close siblings of the Alinco DJ-S41 440 rig at the same price,
I'm
>inclined to think that there's little to solve here beyond curiosity. Just
my
I've modified three of the S41's and have found that the PLL's are very
unpredictable. Only 1 out of three would lock over 460Mhz. I had
envisioned doing the opposite and converting cheaper FRS units to 44x for
inexpensive trackers.
Tim N1BTQ
----------------------------------------------------------------------
Subject: Re: Positions by email
From: "Thomas M. Schaefer" <toms@inconnect.com>
Date: Fri, 29 Sep 2000 12:23:05 -0600
X-Message-Number: 12
Anyone have a suggestion on the format of the email. It should be easy to
type.
Tom NY4I
----------------------------------------------------------------------
Subject: Pharos GPS Rcvr
From: "Sadowski, Allan" <allan.sadowski@ncshp.org>
Date: Fri, 29 Sep 2000 15:32:53 -0400
X-Message-Number: 13
Does anyone have the PS2 pinout for the Pharos GPS Receiver... and for that
Read previous mail | Read next mail
| |