OpenBCM V1.13 (Linux)

Packet Radio Mailbox

DB0FHN

[JN59NK Nuernberg]

 Login: GUEST





  
ZL3AI  > APRS     03.10.00 14:06l 169 Lines 6549 Bytes #999 (0) @ WW
BID : 33733_ZL3AI
Read: GUEST
Subj: TAPR Digest, Sep 30, 1/4
Path: DB0MRW<DB0SON<DB0ERF<DB0ROF<DB0SRS<DB0ZDF<DB0LJ<DB0ACH<ON0RAT<ON0LVN<
      ON6AR<WB0TAX<KP4IG<F8PTT<N2BQF<ZS6RO<ZL3VML
Sent: 001001/2358Z @:ZL3VML.#80.NZL.OC #:42017 [Chch-NZ] FBB7.00g25 $:33733_ZL3
From: ZL3AI@ZL3VML.#80.NZL.OC
To  : APRS@WW


TAPR APRS Special Interest Group Digest for Saturday, September 30, 2000.

1. Re: Spam/Junk (Was: Teen mail)
2. Re: Spam/Junk (Was: Teen mail)
3. Re: Positions by email
4. Re: AVRS Test tonight.
5. Re: Positions by email
6. Re: find-u question
7. 2-way pager sending GPS posit
8. Re: Positions by email
9. Re: 2-way pager sending GPS posit
10. Old motherboards for free
11. Re:  Old motherboards for free
12. Got DCC audio?
13. Re:  Old motherboards for free
14. Re:  Old motherboards for free
15. Re: Got DCC audio?
16. WinLink 2000 and APRS
17. The big gel Cell standby batteries I gave away
18. Some things I took to SEARC hamfest that didn't sell
19. Page positions?
20. Re:  Old motherboards for free
21. Re:  Old motherboards for free

----------------------------------------------------------------------

Subject: Re: Spam/Junk (Was: Teen mail)
From: Brendan Keyport <bkeyport@uswest.net>
Date: Fri, 29 Sep 2000 22:34:04 -0700
X-Message-Number: 1


>The problem with a closed list is that many folks post from addresses that
>are different from their subscribed address (this doesn't necessarily mean
>two separate accounts -- many complex email environments show a "From"
>address that's different than the subscribed address).  For those people,
>a "subscribers only may post" policy causes problems.  And, dealing with
>those problems is a *big* burden on the list administrator.

Ahh, but there wouldn't be a burden on the list operator, assuming 
the USER could fix their mail program (Any intelligent mail program, 
will automatically switch to the right email address, or if it's not, 
they need to fix it themselves, or get their sysadm. to do it.


----------------------------------------------------------------------

Subject: Re: Spam/Junk (Was: Teen mail)
From: Timothy J Salo <tjs@tc.umn.edu>
Date: Sat, 30 Sep 2000 00:55:31 -0500
X-Message-Number: 2

> Date: Fri, 29 Sep 2000 22:34:04 -0700
> From: Brendan Keyport <bkeyport@uswest.net>
> Subject: [aprssig] Re: Spam/Junk (Was: Teen mail)
> 	[...]
> Ahh, but there wouldn't be a burden on the list operator, assuming 
> the USER could fix their mail program (Any intelligent mail program, 
> will automatically switch to the right email address, or if it's not, 
> they need to fix it themselves, or get their sysadm. to do it.

Many mail transfer agents (MTAs) such as sendmail are often configured
to allow users to send mail only from certain domains, no matter how
the user's mailer (mail user agent or MUA) is configured.  I haven't
tested it, but I assume that the UofM's sendmails are configured to
prevent me from sending e-mail as, for example, ab0do@arrl.net.

-tjs

----------------------------------------------------------------------

Subject: Re: Positions by email
From: "Clayton H. Owen" <aa3jy@erols.com>
Date: Sat, 30 Sep 2000 07:44:02 -0400
X-Message-Number: 3

Thomas M. Schaefer wrote:
> 
> Anyone have a suggestion on the format of the email. It should be easy to
> type.
> 
> Tom NY4I
> 
Correct me if I'm wrong but WinLink was designed by and for the Amateur
Radio enthusiast who operates from his/her 'Blue Water' shack..thus
"Gridsquares" would have no meaning out there as has been recently
suggested..only Lat./Lon.

----------------------------------------------------------------------

Subject: Re: AVRS Test tonight.
From: Bob Bruninga <bruninga@nadn.navy.mil>
Date: Sat, 30 Sep 2000 09:09:39 -0400 (EDT)
X-Message-Number: 4

On Fri, 29 Sep 2000, Bob Bruninga wrote:

> One of the possible softwares for linking AVRS VOice channels across the
> country is IVISIT.... At about 930PM EDT they hold an ATV net... Fridays

I finally checked it out, but by the time I logged on at 2300, there was
no one still on.  But I did download the software and I learned one thing.
It looks very promising as an AVRS connection mechanism because it is a
distributed system that does not rely on the central site for the
conference!

The only thing the IVISIT site does is to host the directory of who is "on
line" and wants to VISIT.  Once you have their IP address, the voice
packets flow from each user to each user!  Thus if we used it for AVRS to
link together an global APRS voice conference, then we are not dependent
on a central site!  AND by not being on a central site, we have some
degree of security of being able to only allow conections between licensed
sources.

Now I am a total newbee to this multimedia stuff, and could have this all
wrong, but at least that was my impression.  Its not clear to me how voice
packets from everyone are mixed together in such a distributed system, I
wont know that until I "hear it".

By the way. the HAMS conference is in the arts-and-leisure directory,
under MY ROOMS.

Again the concept of AVRS that I presented at DCC was a voice adjunct to
APRS.  You link local radio channels to your sound card and use IVISIT to
link the audio anywhere in the country.  Initially, we just limk everyone
into the same QSO.  Once that fills up, we spin off other channels and
eventually arrive at a CELL phone concept where from my APRS mobile, I
send an APRS message "CALL W3XYZ", and our local channel is connected to
his anywhere on the planet and we can TALK.

Or "JOIN APRS" and our local channel joins any existing "APRS" discussion
in progress.

The only electronics involved is the VOX circuit and 3 minute timer.
You actually need a VOX circuit and timer going both ways to protect both
your own RF channel and the internet conference from stuck noise...

So try out IVISIT and lemme know if it works as I think it might?

Bob



----------------------------------------------------------------------

Subject: Re: Positions by email
From: Steve Dimse K4HG <k4hg@tapr.org>
Date: Sat, 30 Sep 2000 09:24:20 -0400
X-Message-Number: 5

On 9/30/00 7:44 AM Clayton H. Owen (aa3jy@erols.com) wrote:

>Correct me if I'm wrong but WinLink was designed by and for the Amateur
>Radio enthusiast who operates from his/her 'Blue Water' shack..thus
>"Gridsquares" would have no meaning out there as has been recently
>suggested..only Lat./Lon.
>
This has nothing to do with WinLink. The issue came up that someone 
wanted to send posits via a 2 way pager. I suggested we might be able to 
do this in a few days when the linkage between WinLink and APRS is 
complete. However I found out WinLink does not accept position reports 
from the internet side, nor does there seem to be immediate interest in 
implementing it. I'm guessing, but based on his asking the question and 



Read previous mail | Read next mail


 17.11.2026 21:51:06lGo back Go up