OpenBCM V1.13 (Linux)

Packet Radio Mailbox

DB0FHN

[JN59NK Nuernberg]

 Login: GUEST





  
ZL3AI  > APRS     29.09.00 11:06l 208 Lines 7607 Bytes #999 (0) @ WW
BID : 33673_ZL3AI
Read: GUEST
Subj: TAPR Digest, Sep 26, 3/4
Path: DB0MRW<DB0ERF<DB0ROF<DB0SRS<DB0ZDF<DB0GE<DB0PSC<DB0ACH<PI8JOP<PI8ZAA<
      PI8WFL<VE1DRG<VK3BBS<VK2CZR<VK2GJB<ZL2TZE<ZL2TZE<ZL2WA<ZL2BAU<ZL3VML
Sent: 000927/1117Z @:ZL3VML.#80.NZL.OC #:41414 [Chch-NZ] FBB7.00g25 $:33673_ZL3
From: ZL3AI@ZL3VML.#80.NZL.OC
To  : APRS@WW


From: David VanHorn <dvanhorn@cedar.net>
Date: Tue, 26 Sep 2000 13:45:38 -0500
X-Message-Number: 17

At 12:51 PM 9/26/00 -0400, BlitzK / Xenu wrote:

>What YOU see on HIS web site is a typical SCAM done
>by MANY people.  I'm sure Garmin has NOTHING to
>do with THESE people.

No OTs there? :)
--
Where's dave? http://www.findu.com/cgi-bin/find.cgi?kc6ete-9



----------------------------------------------------------------------

Subject: RE: More: Tiny-Shop.com
From: Bill Vodall <wa7nwp@yahoo.com>
Date: Tue, 26 Sep 2000 11:46:17 -0700 (PDT)
X-Message-Number: 18



> 
> What YOU see on HIS web site is a typical SCAM done
> by MANY people.  I'm sure Garmin has NOTHING to 
> do with THESE people.


Has anybody talked to Garmin about this?

Bill


__________________________________________________
Do You Yahoo!?
Send instant messages & get email alerts with Yahoo! Messenger.
http://im.yahoo.com/

----------------------------------------------------------------------

Subject: Re: APRSplus with AGWPE
From: Bill Vodall <wa7nwp@yahoo.com>
Date: Tue, 26 Sep 2000 11:57:58 -0700 (PDT)
X-Message-Number: 19


Nice write up.  This is getting more interesting all
the time.  Specially now that AGW is working on useing
the left and right channels of the sound card to
support two ports at one time..  1200 AND 9600..

Bill

--- Ralph Milnes <milnes@openix.com> wrote:
> I don't think it's widely known, but APRSplus will
> also work with the AGWPE 
> software, just as WinAPRS and UI-View do.
> 
> Now you can run APRSplus without a TNC by using your
> computer sound 
> card.  Stephen Smith, WA8LMF, has done a great job
> in writing up the 
> details, and I've included his instructions on my
> Sound Card Packet site. 
> The direct link is:
> 
>
http://www.qsl.net/mcarv/Library/AGWPE/AGWPE4.htm#APRSplus
> 
> 73,
> 
> Ralph, KC2RLM



__________________________________________________
Do You Yahoo!?
Send instant messages & get email alerts with Yahoo! Messenger.
http://im.yahoo.com/

----------------------------------------------------------------------

Subject: Re: National 70cm Digital Frequency Search Results
From: "Henk de Groot" <henk.de.groot@hetnet.nl>
Date: Tue, 26 Sep 2000 23:15:31 +0200
X-Message-Number: 20

> I know of software support for three environments:  (a) the Baycom
software

And the very famous software TNC TFPCX. This is used to bind these cheap
modems to all kinds of packet programs. Except for the BayCom software
itself, all other programs use TFPCX (or the TFX clone) to bind their DOS
programs to BayCom modems (and YAM modems). I know you guys in the US do not
have much experience with this cheap hardware, but in Europe this is common
stuff. In windows TFPCX can only be used on modems that are not too timing
critical, no 1200 baud BayCom but I think PAR96 and PicPar will work.

Furthermore there is G8BPQ's software. BPQ also supports a lot of these
modems. I don't know about PAR96 and PicPar, but most certainly the 1200
baud BayCom modem. BPQ will also run in Windows and it can even support
BayCom modems.

Last but not least there is FlexNet, also supporing all these non-TNC
modems - except KISS. There is now even a 32 bit version for Windows. Don't
ask me, I have not tried it. The 16 bit version runs fine in Windows 95.
Windows 98 gives problems with 1200 baud BayCom. The 32 bit version is
supposed to run on the latest Windows versions.

> for DOS; (b) a driver in the SV2AGW software package for Windows; and (c)
> a kernel driver for Linux.  Support for DOS APRS would require either a
> TSR driver program that could emulate a TNC, or adding support to Bob's
> code.  I don't know if that's feasible or not.

Most certainly this is feasible. The AX25_MAC TSR that I use for DIGI_NED
supports these PAR96 and PicPar modems from BayCom (it is just the lowest
layer software taken from the above mentioned TFPCX). This TSR is GNU
software and free to use for other products. It delivers raw AX25 frames
(CRC checked) and you can feed it raw AX.25 frames for transmission (TSR
will add the CRC). If you bind any DOS based product to it then you
immediatly have support for BayCom 1k2, those PAR96 and PicPar modems, YAM
and all kinds of SCC (z8530) based multichannel cards. And above that of
course KISS support...

Eh, one thing that could make this NOT feasible whould be the ammount of
extra RAM needed. The TSR is small, but I understood that DosAPRS is almost
using all available memory. So that could be a show-stopper.

Kind regards,

Henk.



----------------------------------------------------------------------

Subject: RE: PocketAPRS (Was: Re: I have a dream!)
From: "Henk de Groot" <henk.de.groot@hetnet.nl>
Date: Tue, 26 Sep 2000 23:51:55 +0200
X-Message-Number: 21

> This very attitude right here - the one where "if you don't like it,
> move on" -- makes me want to turn in my ham license. Part of amateur
> radio is about experimation - further, it's about emergency service -

I cannot speak for Mike, but as I'm also writing software I can tell you my
attitude.

For me this is just a hobby. I write APRS software because I like it and its
fun to do. So if it is usefull to you, fine. If it isn't, tough. Ofcourse
you can make suggestions to me about improvements. But nobody can force me
to add or change things. Nowbody "owns" me, I'm not a slave.

So you have a lot of complains about the PocketAPRS software. Instead of
bitching about it you could get cooperative. Aparently you have some ideas
about improving the product. Instead of messages like, "you should not have
done it this or that way" you could start to make concrete suggestions how
to improve. Instead of bitching over use of the stylis you could make
suggestions for a different way of navigation. If you can make clear what
the advantages would be and can convince Mike that it will improve the
product, then you may get him to cooperate.

That's the way it works for me anyway. Somebody makes a suggestion about
what is missing or would be nice to add, or, in my case with Open Software,
even deliver code additions. If the idea goes against the general spirit or
fundamental idea it gets rejected, but chances are high that I take it when
it adds something new and usefull. And I add things when I have the time for
it, first things first. If you want the function faster, then provide me
with the code (and this actually happens!). But if somebody says that I
build the product completly the wrong way, that I should not have done it
the way I did without providing a usefull alternative then I will dump
his/her remarks in the famous bit-bucket.

I don't write programs for you or anybody else. When I would do that then I
would demand that you payed my hours, like my employer does. I write the
programs for myself and if they are usefull for you, fine. But I do not
"owe" you or anybody else anything. I'm sure that Mike also writes his
program for fun and for his own pleasure. If you like it, fine, but he did
not write it for you. But if you have usefull suggestiond for improvement
then he, like me, might listen to you. But if you start bitching about whats
wrong the you can expect the kind of remarks you are currently receiving.
Please contribute your ideas but stop bitching. It is a hobby (at least for
me and if it was not then I would stop immediately).

Kind regards,

Henk.



----------------------------------------------------------------------

Subject: UI-View and IGATE
From: "Keith Maton" <feek@bigfoot.com>
Date: Tue, 26 Sep 2000 23:01:30 +0100
X-Message-Number: 22

People.




Read previous mail | Read next mail


 17.11.2026 23:27:21lGo back Go up