OpenBCM V1.13 (Linux)

Packet Radio Mailbox

DB0FHN

[JN59NK Nuernberg]

 Login: GUEST





  
ZL3AI  > APRS     28.09.00 23:37l 234 Lines 7548 Bytes #999 (0) @ WW
BID : 33675_ZL3AI
Read: GUEST
Subj: TAPR Digest, Sep 26, 4/4
Path: DB0MRW<OK0PKL<OK0PPR<OK0PPL<OK0POK<9A0YRB<HA5OB<HA3PG<WB0TAX<KA6EYH<
      IK1ZNW<IK2QCA<IK2UUB<IW2GUR<IK1MVX<TK5KP<F6KED<F5KBJ<F5IX<ZL2TZE<
      ZL2TZE<ZL2WA<ZL2BAU<ZL3VML
Sent: 000927/1120Z @:ZL3VML.#80.NZL.OC #:41415 [Chch-NZ] FBB7.00g25 $:33675_ZL3
From: ZL3AI@ZL3VML.#80.NZL.OC
To  : APRS@WW


The following is an extract from the latest release of UI-View:

"5. The extra filtering of traffic gated from RF to the internet,
introduced in V1.30, was incorrectly blocking some packets. In
particular message acks were being blocked.

6. If you ran more than one RF port, then acks to messages from the
internet were always sent on port 1, even if they had been heard on
another port."


Some non UK users may have noticed that it's been quite tricky to get
message acks back from UK stations.  With these two changes this now appears
to be working pretty well.

I know that I've tried to exchange traffic with non UK stations when I've
been using my D700E in the car and it's not worked well for a while (my own
IGATE runs two RF ports so that would partly explain the problem) and since
installing 1.35 that problem has gone away.

So, big thanks to Roger (G4IDE) for the work he's put in over the last week
or so.
To the rest of the World:  You can now talk to the UK again via IGATE with
no problems.  Throw an ?aprsd at any MB7Uxx callsign you see and give
someone a shout and surprise them!

73
Keith
--
Keith Maton, G6NHU
feek@bigfoot.com
Visit http://www.mb7uiv.co.uk, home of the first licenced APRS gateway in
the UK.
   - Careful with that Axe



----------------------------------------------------------------------

Subject: RE: PocketAPRS (Was: Re: I have a dream!)
From: Claude Head <k5dtn@swbell.net>
Date: Tue, 26 Sep 2000 18:37:16 -0500
X-Message-Number: 23

Well said, Henk. I used to guarantee my free software to those
that used it. Double their money back if not satisfied!

73, Claude
      K5DTN




----------------------------------------------------------------------

Subject: Mystery signal in Sioux Falls
From: RWendel@aol.com
Date: Tue, 26 Sep 2000 19:56:44 EDT
X-Message-Number: 24

<< I have a mystery signal - very strong in Sioux Falls, SD.  Sounds like 
 telemetry. >>
I listened to it, sounds like SCADA telemetry...perhaps used by the city 
public works dept to communicate with the water pump stations in the city and 
at the water towers.
Randy km0d

----------------------------------------------------------------------

Subject: Re: Geocaching
From: Rick Walter <rwalter@rain.millersv.edu>
Date: Tue, 26 Sep 2000 20:41:52 -0400 (EDT)
X-Message-Number: 25


Check out http://confluence.org   (NO WWW)
  
For those that like to use their GPS receivers, check out this web
site.  I already have two in PA under my belt.  Check 40N 77W and 40N 78W
in Pennsylvania.

Rick


----------------------------------------------------------------------

Subject: Digipeaters
From: "Travis J. Maclay" <travis@btea.org>
Date: Tue, 26 Sep 2000 21:55:38 -0400
X-Message-Number: 26

Good evening!  I am taking a week long vacation from Jacksonville, Florida
to Nashville, TN this week.  The major cities I will be passing through
along the way is Lake City, FL, Valdosta, GA, Macon, GA, Atlanta, GA,
Chattannooga, TN, and then Nashville, TN.  Could someone provide me with
possible digipeaters along the way?

One question I do have for all is something that I have never really
grasped.  I asked a friend about it this evening and am not sure about this.
I know that by default WinAPRS sets myalias to none.  As I travel outside of
my home area and change my unproto path to "relay,wide", that default of
"none" will not then digipeat my packet if I am correct.  Their alias would
have to be set to "relay" in order for that to work.  Correct?

My question is why not make the default "relay"?  I'm sure there is a very
good reason for this or else the authors would not have written the software
the way they did.  Therefore, if anyone would like to reply, they could do
so off the sig in order to preserve bandwidth.  Also, if the default is
"none", could I not set my unproto path to "none" and have it relay the
packet?  :-) I know that thinking is rather crazy, but just something I
thought of this evening.

The main reason I ask is because yesterday I took a trip two hours north of
Jacksonville, and the only packets along the way that made it out of my D-7A
and back to me were ones sent in Jacksonville.  I traveled to Savannah, GA
and had it set to beacon the entire trip with an unproto of "relay,wide" and
never once saw "my packet" until returning to Jacksonville.

Just curious and certainly appreciate any help!

73's
de W5TJM
Travis


----------------------------------------------------------------------

Subject: Need Help With KAM & WinAPRS
From: "tullo@ematic.com" <tullo@email.com>
Date: Tue, 26 Sep 2000 21:31:52 -0500
X-Message-Number: 27

I need Help!  I can receive packets but no transmit.  I am using WinAPRS
2.4.7, Kam w/enhancement board Ver 8.2

Things I have tried:

Upgraded to 2.4.7
Tried Restore Defaults
Tried APRS+SA (Works Fine)
Tried APRSDos (Works Fine)
Tried 2.4.7 again (No  Transmit, Recieves Fine)
The KAMis in Command mode (I can communicate with the TNC from the terminal
window.

Recapping, So, I'm using the newest version.  I'm using the Kam defaults.
Two programs work.  Two versions of WinAPRS don't work. The KAM is in
command mode.

If you have any ideas Let me know.

Ralph





----------------------------------------------------------------------

Subject: Re: Digipeaters
From: "Jeff Brenton" <jeffb@espi.com>
Date: Wed, 27 Sep 2000 02:32:54 -0000
X-Message-Number: 28

> list of digipeaters

Visit the Questionable web page, listed below, and download the very latest
WinAPRS-compatible DIGIS.LOG file, which lists all reported (and hundreds of
UNreported!) digipeaters, world-wide.

> myalias none

As a mobile, there are very few circumstances where YOU should be acting as
a digipeater. MYALIAS is used to set the TNC to digipeat... so NONE is
appropriate (actually, it should be "MYALIAS %" to blank it out).

MYALIAS does NOT affect your unproto path, which should be (in most cases)
RELAY,WIDE to start, and after that depends upon the local network. I use
RELAY,WIDE,WIDE2-2 in the Chicago/Milwaukee area, to good effect.

Jeff Brenton, Amateur Radio call sign KA9VNV
http://espi.com
Questionable web page: http://dididahdahdidit.com
That strange feeling that you've never
done this before: http://uvajed.espi.com

"Modern Liberalism: The embodiment of an irrational fear of
letting other people run their own lives."



----------------------------------------------------------------------

Subject: Re: MURS
From: "Jeff Brissette" <kd7jny@link-11.com>
Date: Tue, 26 Sep 2000 21:52:32
X-Message-Number: 29

Sadly, I've also come up empty. I've tried every possible Web search I 
could think of and couldn't come up with anything. I'm going to keep look 
and if I find anything I'll let you know.

----------------------------------------------------------------------

Subject: Re: Digipeaters
From: "Travis J. Maclay" <travis@btea.org>
Date: Tue, 26 Sep 2000 22:44:22 -0400
X-Message-Number: 30

Okay, a bit of confusion.  I will try to clarify my last questions about
unproto and myalias.  I was referring to my base station at home being set
to "myalias relay" and not my mobile station.  I do realize that setting my
mobile station to a myalias of none is not a good thing.  I also realize the
syntax with unproto paths on my D-7A should be, by default, "relay,wide".  I
appreciate the help from all of you.

I guess my main problem is trying to use 5 watts with a rubber duck antenna
on the highway in the middle of Georgia.  Thanks for all of your replies.

Travis
W5TJM




---

END OF DIGEST



Read previous mail | Read next mail


 17.11.2026 23:41:22lGo back Go up