| |
ZL3AI > APRDIG 07.02.03 11:59l 208 Lines 7050 Bytes #999 (0) @ WW
BID : 846-ZL3AI
Read: GUEST
Subj: TAPR Digest, Feb 01, 5/5
Path: DB0FHN<DB0ZWI<DB0HST<ON0DXC<WA7V<WB0TAX<HB9OK<IR0NET<VK3TE<ZL2BAU<
ZL3VML
Sent: 030204/0929Z @:ZL3VML.#80.NZL.OC #:58792 [Chch-NZ] FBB7.00i $:846-ZL3AI
From: ZL3AI@ZL3VML.#80.NZL.OC
To : APRDIG@WW
Subject: FW: Shuttle search net request
From: "Ramon F. Kolb" <ramon@ieee.org>
Date: Sat, 1 Feb 2003 13:37:57 -0500
X-Message-Number: 32
FYI
-----Original Message-----
From: G6CKR [mailto:g6ckr@btopenworld.com]
Sent: Saturday, February 01, 2003 13:29
To: echolink@yahoogroups.com; ui-view@yahoogroups.com
Subject: [ui-view] Shuttle search net request
Any Op in the southern Oklahoma area is asked if they could check into the
ARES-NET node 62116.
Roger G6CKR
For ARES
Could someone copy to the ARPS group as I'm not a member Thanks.
----------------------------------------------------------------------
Subject: Re: Unproto path ?
From: Bob Bruninga <bruninga@usna.edu>
Date: Sat, 1 Feb 2003 13:53:46 -0500 (EST)
X-Message-Number: 33
On Sat, 1 Feb 2003, Henk de Groot wrote:
>Alternative 1)
>You can convert WIDE7-n to a lower hop-count.
Just for comment, I dont like anything that modifies a sender's packet.
>Alternative 2)
>On the last hop you allow, you can set the "digipeated" flag;..."*"
>... On input WIDE7-5 is send out as WIDE7-4*.
I like this one. It preserves the intent of the sender, but just ignores
his packet as not in accordance with the local traffic load.
de WB4APR@amsat.org, Bob
----------------------------------------------------------------------
Subject: Re: Unproto path ?
From: Bob Bruninga <bruninga@usna.edu>
Date: Sat, 1 Feb 2003 14:00:12 -0500 (EST)
X-Message-Number: 34
On Sat, 1 Feb 2003, Bill Vodall - WA7NWP wrote:
>>Lets go back and also look at the QRM generated by the original path
>>WIDE7-7,TRACE6-6.
>>
>>Lets assume that every digi hears 3 others (at least). So one packet
>>begets 3, begets 9, begets 27 or 3 to the Nth power for an N hop path. So
>>.... Bob, WB4APR
>
>The other side of the issue that prevents this "mutlilevel marketing
>packet machine" from flooding the network each time a packet with a
>poorly crafted path is launched is that ideally, each digi (that's
>smarter then a walnut) will only rebroadcast the same packet once.
>Thus for N digi's, you see at most N packets. Not N^N.
oops, you are completely right. I was still thinking of the old
WIDE,WIDE,WIDE... network. back under my rock.... Bob
----------------------------------------------------------------------
Subject: tragic day
From: Kevin Deckert <kdeckert@mercuryspeed.com>
Date: Sat, 01 Feb 2003 13:54:05 -0800
X-Message-Number: 35
http://spaceflightnow.com/shuttle/sts107/status.html
As the news of the shuttle Columbia disaster in the skies above Texas
unfolds we are riveted to the event.
It brings to the minds of many the tremendous challenges faced by
mankind as we push the limits of technology.
The brave seven who set their life's goals upon the stars are now lost
to the universe.
Let none forget their names nor their determination and courage.
For them it was not a job...
In the words of Ron Dittemore, program manager
"Human space flight is a passion not just a job."
In eight minutes from a standing start the shuttle reaches 25 times the
speed of sound! Any one ever willing to undergo such an event must truly
love what they do.
We have always sought for those things just so tantalizing beyond our
reach. Our willingness to reach just that little bit farther is both
filled with danger and triumph. It is what makes us human.
Reaching to the stars has always been a direction and the challenges
overcome and success achieved has benifitted us all.
On this day we mourn the passing of these brave souls and reflect on the
meaning of what we do and the important events in our lives.
kevin
----------------------------------------------------------------------
Subject: Shuttlle debris photo
From: Andrew Rich <andrew.rich@bigpond.com>
Date: 02 Feb 2003 09:06:35 +1000
X-Message-Number: 36
http://www.nzherald.co.nz/storydisplay.cfm?storyID=3099051&thesection=news&thess
ubection=world
----------------------------------------------------------------------
Subject: Grim Reality shuttle
From: Andrew Rich <andrew.rich@bigpond.com>
Date: 02 Feb 2003 09:11:02 +1000
X-Message-Number: 37
In Hemphill near the Louisiana line, hospital employee Mike Gibbs
reported finding what appeared to be a charred torso, thigh bone and
skull on a rural road near what was believed to be other debris. Billy
Smith, a Texas Department of Public Safety spokesman, confirmed the
find. He said authorities had roped off the area and were collecting
evidence.
----------------------------------------------------------------------
Subject: TEXAS debris reports first hand
From: Andrew Rich <andrew.rich@bigpond.com>
Date: 02 Feb 2003 09:12:54 +1000
X-Message-Number: 38
http://www.kansascity.com/mld/kansascity/news/breaking_news/5083301.htm
----------------------------------------------------------------------
Subject: Re: New spec - working notes
From: Rich Osman <Rich@osman.com>
Date: Sat, 01 Feb 2003 21:37:40 -0600
X-Message-Number: 39
WA8LMF2@aol.com wrote:
>Even the UK is now officially metric. The only other country that still
>uses the US customary system, AFAIK, is the country formerly known as Burma
>( a vestige of the British colonial era).
Even the US is officially metric. All of our units have been defined by
metric references since before the turn of the century. The common
usage is still scattered, but it's changing, albeit slowly. There are
now KM markers on Alabama Interstates.
----------------------------------------------------------------------
Subject: Re: New spec - working notes
From: "Patrick Schwarz" <psschwarz@kellnet.com>
Date: Sat, 1 Feb 2003 23:20:07 -0500
X-Message-Number: 40
>WA8LMF2@aol.com wrote:
>
>>Even the UK is now officially metric.
Not fully. They use miles, too. Probably for us Americans who don't know
what a kilometer is.
>Even the US is officially metric. All of our units have been defined by
>metric references since before the turn of the century. The common
>usage is still scattered, but it's changing, albeit slowly. There are
>now KM markers on Alabama Interstates.
Metric markers are for our Canuckian friends (and other visitors whose
country is metric). Life would be much simpler with if measurements systems
were uniform.
>mailto:Rich@Osman.com http://www.rich.osman.com
>Rich Osman; POB 93167; Southlake, TX 76092 (Near DFW Airport) ARS: N1OZ
>
>If you receive something that says "Send this to everyone you know,"
> PLEASE pretend you don't know me.
DITTO!!
Patrick...KB8RTZ...
----------------------------------------------------------------------
Subject: Re: New spec - working notes
From: "JB Crafts" <jbcraft@adelphia.net>
Date: Sat, 1 Feb 2003 23:29:12 -0500
X-Message-Number: 41
>Metric markers are for our Canuckian friends (and other visitors whose
>country is metric). Life would be much simpler with if measurements systems
>were uniform
AMEN!!! make them all go BACK! I am getting tired of reaching for a wrench
and having to look, is it 7/16 or 15mm...
(not to mention my .357 vs 9mm)
Bob
---
END OF DIGEST
Read previous mail | Read next mail
| |