OpenBCM V1.13 (Linux)

Packet Radio Mailbox

DB0FHN

[JN59NK Nuernberg]

 Login: GUEST





  
ZL3AI  > APRDIG   03.02.03 14:28l 152 Lines 5496 Bytes #999 (0) @ WW
BID : 755-ZL3AI
Read: GUEST
Subj: TAPR Digest, Jan 20, 3/3
Path: DB0FHN<DB0RGB<DB0MRW<DB0ERF<DB0FBB<DB0IUZ<DB0GOS<ON0AR<WB0TAX<SP7MGD<
      IK6PYS<VK3TE<ZL2TZE<ZL3VML
Sent: 030124/1018Z @:ZL3VML.#80.NZL.OC #:58043 [Chch-NZ] FBB7.00i $:755-ZL3AI
From: ZL3AI@ZL3VML.#80.NZL.OC
To  : APRDIG@WW

Subject: proxyAPRS...
From: "Darryl Smith" <Darryl@radio-active.net.au>
Date: Tue, 21 Jan 2003 13:09:37 +1100
X-Message-Number: 19

People

There has been an interesting discussion going elsewhere about mobile IP
services such as GPRS and 802.11 where the IP address changes every time
you connect to a new access point or base station. 

If you are mobile and connect to a server - even with geographical
filtering attached, you will either miss messages and information, or
get a full dump when you change base stations.

What I think that is needed is an proxyAPRS. That is, you sign into this
piece of software with your callsign, and it only dumps any new packets
since your last login. It caches all messages to you, and all positions
that you want to see.... 

This would mean that if you are on a service where your IP address can
change whilst mobile (such as GPRS) you can have full connectivity
whilst minimising downloads

Anyone want to take this on?

Darryl

---------
Darryl Smith, VK2TDS   POBox 169 Ingleburn NSW 2565 Australia
Mobile Number 0412 929 634 [+61 4 12 929 634 International] 
Darryl@radio-active.net.au | www.radio-active.net.au  

----------------------------------------------------------------------

Subject: Re: proxyAPRS...
From:     Jeff King <jeff@aerodata.net>
Date: Mon, 20 Jan 2003 21:59:06 -0500
X-Message-Number: 20

2nd time was a charm.

This sounds like a good "plug in" for existing APRS server software. Maybe
as simple as making the history "dump" programmable or putting a serial
number on each transmission. So instead of the host keeping tabs, the
client keeps tabs and says:

"Hey, I got up to line number 1567, send me all after that"

Regards,


-- 
Jeff King, jeff@aerodata.net on 01/20/2003

----------------------------------------------------------------------

Subject: Re: APRS & 9600 (was Next Gen TNC )
From: "Dakota Summerhawk" <wypcguy@hotmail.com>
Date: Mon, 20 Jan 2003 20:57:22 -0700
X-Message-Number: 21

Alright,

Now we run into the power strugle of "if I run more power than my station
will be heard" What stops a station from running 150 watts out to be heard
and creaming other stations? What would be an acceptable power level for a
station to be running and still be heard to in the running for the system? I
have a 50W rig with a antenna that has a 3db gain that gives me 100W out but
I rarley run that much as it is overkill. I understand that the stations
running 5W closer to the digi as going to be heard over the station running
150W and farther away. But where does the power issue end? I know that
responsible user will not have the issue of running a ungodly amount of
power but what about the rest of the hams that dont abide by this?
Just a thought.
Peter N0WRE

----------------------------------------------------------------------

Subject: Re: APRS & 9600 (was Next Gen TNC )
<LYR30523-116404-2003.01.20-22.44.27--kb2scs#optonline.net@lists.tapr.org>
From: kb2scs@optonline.net
Date: Mon, 20 Jan 2003 23:14:16 -0500
X-Message-Number: 22

Hi Dakota and All
            Here is the answer is in one sentence.
"Good Amateur Practice"

----------------------------------------------------------------------

Subject: network fixes
From: "Wes Johnston" <wes@johnston.net>
Date: Mon, 20 Jan 2003 23:14:29 -0500
X-Message-Number: 23

This is still "rough", but bear with me as I refine it.  I didn't post it
here because there are some schematics and illustrations which could not be
send to this SIG.

http://wes.johnston.net/aprs/solutions.htm has a rambling about possible
solutions to increase channel capacity by fine tuning our network and
rearainging parts of it.  I also have a drawing of the smart relay system I
wrote about the other day.  I know it's a lot of reading, but I felt the
explainations would come together together my idea would tie all the best
parts of each together at the end.

Wes

----------------------------------------------------------------------

Subject: Re: proxyAPRS...
From: "AE5PL Lists" <HamLists@ametx.com>
Date: Mon, 20 Jan 2003 22:35:27 -0600
X-Message-Number: 24

The hooks are in javAPRSSrvr for anyone to write this type of
application (see http://javaprssrvr.app.aprs-is.net).  However, some
thoughts for consideration.

How long should a server think the client will reconnect before deleting
the history for that station?
What would the affect be of delayed transmission of message packets on
the originating station?
What would keep someone from connecting a server to that port and
potentially reinserting old packets into the Internet?  Before someone
says this can't happen, it can and has.  This is one of the main reasons
javAPRSSrvr history ports are unidirectional and only support historical
posits back to last known position.
If we were to start "numbering" the packets, how would that numbering
occur considering the same packet can occur multiple times from
different sources and appear in different sequences on different
servers?  How would those packets be compatible with today's clients?

These questions are not challenges to the idea of a proxyAPRS, but IMO
some important factors to consider before implementing something like
that on APRS-IS.  IMO, this would be a nice experiment for someone to do
on a closed basis.  Due to the above questions and others, my tendency
would be to discourage trying to offer this on an open basis.

73,

Pete Loveall AE5PL
pete@ae5pl.net

---

END OF DIGEST


Read previous mail | Read next mail


 16.11.2026 11:23:43lGo back Go up