| |
ZL3AI > APRDIG 03.02.03 14:28l 285 Lines 10150 Bytes #999 (0) @ WW
BID : 753-ZL3AI
Read: GUEST
Subj: TAPR Digest, Jan 20, 1/3
Path: DB0FHN<DB0RGB<OK0PPL<RZ6HXA<IK1ZNW<ON0AR<ZL2BAU<ZL3VML
Sent: 030124/1015Z @:ZL3VML.#80.NZL.OC #:58041 [Chch-NZ] FBB7.00i $:753-ZL3AI
From: ZL3AI@ZL3VML.#80.NZL.OC
To : APRDIG@WW
TAPR APRS Special Interest Group Digest for Monday, January 20, 2003.
1. Fwd: Fireball watch: Starshine 3 satellite to disintegrate on Jan. 21st
2. Re: Next Generation TNC -- a "real" TNC, please
3. IBM Thinkpad battery
4. Re: Schematic Software
5. Re: D700 "TNC OPENING" burp
6. Re: IBM Thinkpad battery
7. Re: IBM Thinkpad battery
8. Re: IBM Thinkpad battery
9. APRS & 9600 (was Next Gen TNC )
10. Recommended repeat path
11. Re: Next Gen TNC
12. Re: APRS & 9600 (was Next Gen TNC )
13. Re: IBM Thinkpad battery
14. Re: Schematic Software
15. Re: APRS & 9600 (was Next Gen TNC )
16. Re: APRS & 9600 (was Next Gen TNC )
17. Re: APRS & 9600 (was Next Gen TNC )
18. VS-3 board an the D-700
19. proxyAPRS...
20. Re: proxyAPRS...
21. Re: APRS & 9600 (was Next Gen TNC )
22. Re: APRS & 9600 (was Next Gen TNC )
<LYR30523-116404-2003.01.20-22.44.27--kb2scs#optonline.net@lists.tapr.org>
23. network fixes
24. Re: proxyAPRS...
----------------------------------------------------------------------
Subject: Fwd: Fireball watch: Starshine 3 satellite to disintegrate on Jan.
21stFrom: blitz <blitz@macronet.net>
Date: Mon, 20 Jan 2003 01:16:16 -0500
X-Message-Number: 1
>Space Weather News for January 19, 2003
>http://www.spaceweather.com
>
>The glittering Starshine 3 satellite, built by schoolkids and launched in
>Sept. 2001, will soon re-enter Earth's atmosphere. Can you spot the
>fireball? Re-entry estimates vary from 0500 UT (midnight EST) to 1330 UT
>(8:30 EST) on Tuesday, Jan. 21st. Although Starshine is likely to re-enter
>above some unpopulated stretch of ocean, the satellite's final orbit does
>carry it over North America and eastern Europe where sky watchers might
>see it.
>
>"There's no danger to anyone on the ground," says Prof. Gil Moore, the
>director of Project Starshine. "We designed the satellite so that it will
>be 100% consumed about 80 km up." Except for a few small steel screws the
>body of the spacecraft is made entirely of aluminum--a substance that will
>vaporize during the bright and fiery descent.
>
>Visit spaceweather.com for more information about Starshine 3 as well as
>links to the latest re-entry predictions (they will improve between now
>and Tuesday) and photo tips, too!
----------------------------------------------------------------------
Subject: Re: Next Generation TNC -- a "real" TNC, please
From: "Darryl Smith" <Darryl@radio-active.net.au>
Date: Mon, 20 Jan 2003 18:04:19 +1100
X-Message-Number: 2
RE:
>Would there be any interest in a 2 to 4 port parallel port baycom modem.
>Basically 4 MX-614 chips and some glue logic? Maybe a DB25 on one side, and
>DB9 radio connectors on the other. MX614 chips are $5 a pop, so I would
>imagine a four port 1200 baud modem could be made for < $50. This doesn't
>exist, but perhaps it would be useful for all these next generation TNC
>devices we are talking about? Something to tie to the PC/104 or desktop
>computers like Jeff is suggesting?
>
>-Jim KB0THN
Jim
This is FANTASTIC... The incremental computing power requirement for
four modems over one modem is minimal - if you decode with 4800 Hz
sampling, not attempting to sample the zero-crossing on Rx.
Funny thing is that this is where the eTNC started off... And wanting a
processor to turn this into a KISS TNC...
If you, or anyone else, is prepared to work on this, I am sure that TAPR
would look favourably at doing it as a KIT.
Darryl
---------
Darryl Smith, VK2TDS POBox 169 Ingleburn NSW 2565 Australia
Mobile Number 0412 929 634 [+61 4 12 929 634 International]
Darryl@radio-active.net.au | www.radio-active.net.au
----------------------------------------------------------------------
Subject: IBM Thinkpad battery
From: Robert W Burton <kd4ydc@juno.com>
Date: Mon, 20 Jan 2003 09:33:53 -0500
X-Message-Number: 3
Curious,
I am getting ready to run a IBM thinkpad in my van with an inverter.
Should I take the battery out? It would be nice to have the battery in
there for possible "external use" but that will be once in a Blue Moon.
Thanks,
Robert
----------------------------------------------------------------------
Subject: Re: Schematic Software
From: "Doug Younker" <dougy@ruraltel.net>
Date: Sun, 19 Jan 2003 22:34:49 -0600
X-Message-Number: 4
Although it seems to be a cludgy way of doing it you should be able to find
a file named schemat.bmp at arrl.org , the file is a collection of schematic
symbols you past from into a new drawing.
73
Doug, N0LKK
dougy@ruraltel.net
----------------------------------------------------------------------
Subject: Re: D700 "TNC OPENING" burp
From: "Ronald Reams" <wa4mjf@worldnet.att.net>
Date: Mon, 20 Jan 2003 09:44:30 -0500
X-Message-Number: 5
You may get away with it for a lifetime and never have a spike when you
start your vehicle. However, one time can ruin your radio!
Always best to turn off radio before engagin' the starter!
73 de Ronnie
----- Original Message -----
From: "H. N. Vordenbaum" <k5hv@beecreek.net>
To: "TAPR APRS Special Interest Group" <aprssig@lists.tapr.org>
Sent: Sunday, January 19, 2003 23:31
Subject: [aprssig] Re: D700 "TNC OPENING" burp
I leave mine in TNC mode all the time, and never saw that problem. GPS
comes on with ignition switch in Camry. (powered from aux power socket)
Radio power is direct from battery.
>Starting engine with radio on doesn't
cause a problem either.<
73, Harv
K5HV
----------------------------------------------------------------------
Subject: Re: IBM Thinkpad battery
From: N0ESC-APRS <n0esc-aprs@charter.net>
Date: Mon, 20 Jan 2003 08:36:15 -0600
X-Message-Number: 6
Robert:
Without having to design anything else into it, I would recommend taking
out the battery and running on the power cord. Set up a regular
maintenance schedule to charge the battery and keep it with you. This will
be easier on the battery than leaving it in the unit charging all the time
(eventually the charge controller will fail if plugged in all the time on a
laptop, they just aren't designed that well. Your other option would be to
build or buy a separate charge controller for the laptop, allowing the
charging to be switched on and off independently of the power source.
Michael
N0ESC
----------------------------------------------------------------------
Subject: Re: IBM Thinkpad battery
From: "tvsjr@sprynet.com" <tvsjr@sprynet.com>
Date: Mon, 20 Jan 2003 10:09:04 -0600 (CST)
X-Message-Number: 7
The upside to leaving the battery inserted is that if you happen to lose
power from the invertor for any reason, the laptop will continue to run off
battery and won't die without shutting down properly.
Terry
----------------------------------------------------------------------
Subject: Re: IBM Thinkpad battery
From: "Roy Bost" <rbost@itexas.net>
Date: Mon, 20 Jan 2003 09:37:15 -0600
X-Message-Number: 8
If I were you I'd check with IBM! I ruined a battery in an AST by leaving
it in the laptop while the laptop was part of my tracker for a couple of
years. When I changed over to a Panasonic Toughbook, I called Panasonic for
advice. They said it was ok to leave the battery in place as the laptop had
its own charging circuit. They also said that as long as the supply voltage
was higher than the battery voltage, their expensive dc<>dc converted was
not needed...it would just take longer to charge the battery and that I
might lose data if the car voltage dropped below the battery voltage. The
battery voltage was 10.8 vdc.
----------------------------------------------------------------------
Subject: APRS & 9600 (was Next Gen TNC )
From: sv1rd@nbg.gr
Date: Mon, 20 Jan 2003 17:46:24 +0200
X-Message-Number: 9
Hello Henk
>-----Original Message-----
>From: <henk.de.groot@hetnet.nl>
>[mailto:aprssig@lists.tapr.org]
>Date: Fri, 17 Jan 2003 15:33:17 +0100
>Subject: [aprssig] RE: Next Gen TNC
>
>Hello Tasos,
>
>From: <sv1rd@nbg.gr>
>>We intend to continue use 1200 bps in the future?
>
>Please note that for the users APRS transmits single independent packets.
>A significant ammount of time is spend on TX attack and decay. Even
>with infinite speed it will save at best 1/3 of the time.
I think its not bad
>>Mobiles could use Kenwood or Alinco trackers or something like PIC-e for
>>9600 bps.
>
>Not with radios with 250ms TX delay, that's a waste. Besides that 9600
>bps is more suspectable to errors; at least with the simple decodes we as
>amateurs tend to use.
>
>There is a way to improve the throughput. Thats making APRS a little more
>CSMA a little less ALOHA.
>
>The idea is block-mode transfer. A digi absorbs all packets for 30 seconds
>and then transmit the data as one big block of data. Then it starts
collecting
>again...
>
>This could be done via a smart digi, but maybe its also possible to use
>simple TNC's and fool the TNC's DCD to keep it from transmitting unitl the
>next 30 second timeslot appears.
>
>Of course this slows down communication, especially message exchange.
>The advantage is that it is more efficient. The mobiles can all hear the digi
>so during the transmision nobody will interrupt the stream. Thats why I
>say this makes it a bit more CSMA and a bit less ALOHA.
>
>Also only one TX attack and one TX decay is needed for the whole group
>of packets. Here high speed would also have an advantage.
>
>Okay, just another strange idea :-)
>
>Kind regards,
>
>Henk.
Here in my country there are 2 digis with 9600 in uhf (438.100 MHz with
SYMEK tnc2h + Uidigi firmware) one in Athens and one in Thessaloniki and I
think up to summer will be 4 to 6.
The only problem is we need 2 more hops (now) for the uhf digi and for
Uiview gateway that relay this net to 144.800 MHz our VHF APRS frq.
All mobile users (2 - 6) have D700 there are 2-4 base stations and all the
other traffic came from gateway.
The smaller packet (1/4 of 1200) eliminate fading problem and in the city
the results are better from vhf/1200.
There also the advantage of better gain for uhf antenas.
I dont know if other areas have checked 9600 APRS in uhf or vhf
Regards Tasos sv1rd
----------------------------------------------------------------------
Read previous mail | Read next mail
| |