OpenBCM V1.13 (Linux)

Packet Radio Mailbox

DB0FHN

[JN59NK Nuernberg]

 Login: GUEST





  
ZL3AI  > APRDIG   03.02.03 14:28l 250 Lines 9383 Bytes #999 (0) @ WW
BID : 759-ZL3AI
Read: GUEST
Subj: TAPR Digest, Jan 21, 2/3
Path: DB0FHN<DB0RGB<OK0PPL<RZ6HXA<SP7MGD<WB0TAX<ON0AR<ZL2BAU<ZL3VML
Sent: 030124/1049Z @:ZL3VML.#80.NZL.OC #:58046 [Chch-NZ] FBB7.00i $:759-ZL3AI
From: ZL3AI@ZL3VML.#80.NZL.OC
To  : APRDIG@WW

Subject: Map of hops (cool)
From: "James Jefferson" <jj@aprsworld.net>
Date: Tue, 21 Jan 2003 15:18:28 -0600 (CST)
X-Message-Number: 11

Scott Miller suggested last week that it would be possible to datamine
aprsworld.net to create a map of the number of hops required for a
packet to reach an igate. I've done that for California and I wanted to
share the results with everyone.

http://aprsworld.net/data/igate-hops/

There is a thumbnail of the map at that page with links to a PDF and
JPEG version of the map. They are ~1 and ~2 megabytes respectively.

Let me know if this is useful and I will automate the process so you can
request such a map for whatever area you are interested in.

-Jim KB0THN

----------------------------------------------------------------------

Subject: RE: Map of hops (cool)
From: Miller Scott Contr 30SCS/FTI <Scott.Miller@vandenberg.af.mil>
Date: Tue, 21 Jan 2003 21:30:59 -0000
X-Message-Number: 12

Cool, just what I was looking for.  Now if only the mobiles could remember
each place they transmitted a packet, so we could see where they were when
it DIDN'T make it to an IGATE.

Periodic snapshots would be nice... I'd like to be able to see how much my
own IGATE has changed the local picture.  Animations of data gathered over
several months would be cool, too.  =]

Scott / N6UQE

----------------------------------------------------------------------

Subject: Low-cost telemetry transceivers
From: Miller Scott Contr 30SCS/FTI <Scott.Miller@vandenberg.af.mil>
Date: Tue, 21 Jan 2003 21:56:23 -0000
X-Message-Number: 13

I wanted to get people's thoughts on low-cost, low-power transceivers for
APRS.  I'm looking at the SR-125V from Tigertronics, and it looks very nice
as far as form factor, features, and power consumption.  It's a bit more
expensive than I'd like for a remote weather station with a high chance of
vandalism, though, and at a couple of sites I've got in mind even 1 watt
would be overkill.  I can see the digi's antenna site, and I ought to be
able to hit it with 50 mw and a good antenna.  The lower power consumption
on transmit would also lessen the solar power requirements.  Can anyone
suggest either a dedicated telemetry radio or suitable surplus gear that can
be adapted?

Also, what's everyone think of the 1-wire weather station?  It seems to be
the cheapest commercial choice around.  I don't need anything fancy, just
wind speed, direction, and temperature.  Again, low cost is critical.  The
weather station(s) would be deployed at paraglider / hang glider sites, so
there's a good chance of someone either deliberately destroying them (the
sites are fairly easily accessible) or accidentally crashing into them.
More than one windsock pole has been lost to a rookie pilot... =]

Anyway, any input on the subject would be appreciated.  Thanks...

Scott / N6UQE

----------------------------------------------------------------------

Subject: Re: VS3 Voice Chip for D700 Worthwhile?
From: "Joel Black" <w4jbb@charter.net>
Date: Tue, 21 Jan 2003 16:30:07 -0600
X-Message-Number: 14

I got it and it only "talks" when I receive a message.  At one point, there
was some way to send messages and make the thing talk...  Anybody remember
*something* like that?

Joel B. Black, W4JBB
w4jbb@charter.net

----------------------------------------------------------------------

Subject: Re: Map of hops (cool)
From:     Jeff King <jeff@aerodata.net>
Date: Tue, 21 Jan 2003 18:18:01 -0500
X-Message-Number: 15

James:

This is great and is a fantastic tool for someone trying to make a case for
limiting digi hop's. I it appears in California, anyone using more then 2
hops in the majority of the state is just adding QRM.

Now, looking at the map, I did have some thoughts.

I see some orphan posits, mostly single hops, that have no clustering of
other posits near them. Could it be these are due to band openings? Having
the ability to filter these out would be useful, but I imagine any way to
this would need to make some assumptions.... possibly a filter for posit
density with the assumption if a posit happens once in a certain "grid
square" it is due to propagation enhancement, and should be discard.

Regardless, this is a fantastic tool for those want to manage their networks
as it gives them the tools to do real diagnostics of the network.

73

--
Jeff King, jeff@aerodata.net on 01/21/2003

----------------------------------------------------------------------

Subject: Re: Map of hops (cool)
From: "Spider" <spider@rivcom.net>
Date: Tue, 21 Jan 2003 19:11:21 -0700
X-Message-Number: 16

----- Original Message -----
From: "Jeff King" <jeff@aerodata.net>
To: "TAPR APRS Special Interest Group" <aprssig@lists.tapr.org>
Sent: Tuesday, January 21, 2003 4:18 PM
Subject: [aprssig] Re: Map of hops (cool)

James:

This is great and is a fantastic tool for someone trying to make a case for
limiting digi hop's. I it appears in California, anyone using more then 2
hops in the majority of the state is just adding QRM.

---
Only true for one case, Jeff.  It's only true if ones intent is to reach the
internet.
The map is very cool on the surface, but there is a lot of unknown
information missing in order to really prove paths and
tracking capability.  Actually, it can be very mis-leading....one of those
"pictures that can tell a thousand lies".
However, this sort of data collection and disimination has great
possibilities for many applications if it can be refined and some "knowns"
given.
Finding dead spots for those people using low power trackers (under 5 watts)
would be very interesting.  Do this same map with 6 months worth of data
from a 5 watt tracker or a 1 watt tracker would tell a different
story...possibly.
A lot of people run a lot of power on APRS when it really is not needed.
That is where the QRM really plays a part.
My tracker runs 5 watts.  I've tracked my wife all the way into SoCal from
Arizona with very minor dead spot areas.  Yet I see people running upwards
of 60 watts that really do not do much better.

Jim, WA6OFT

----------------------------------------------------------------------

Subject: Re: Map of hops (cool)
From: Byron Smith <wa6ylb@theworks.com>
Date: Tue, 21 Jan 2003 19:05:39 -0800
X-Message-Number: 17

>This is great and is a fantastic tool for someone trying to make a case for
>limiting digi hop's. I it appears in California, anyone using more then 2
>hops in the majority of the state is just adding QRM.

QRM?
That depends.

What are we trying to do here?

Is APRS an RF application that's meant to feed the Internet as efficiently
as possible, or perhaps APRS is an real time RF application that just
happens to be monitored by the Internet IGATES.

Somehow I think we have *lost touch* with what APRS is  - An RF ham radio 
application that just happens to be monitored by an IGATE.

Should I set my path *purely* to satisfy a path to an IGATE, or to fulfill 
the needs the APRS RF system needs or desires?

***If*** the idea is to only feed the Internet, then we need to eliminate 
all digis, and replace them with IGATE portals ONLY! No need in cluttering 
up the spectrum with dupe packets that get fed via an IGATE the Internet.

I certainly dont remember this much talk about longer paths before the 
Internet IGATES showed up. I agree that we should help "elmer" newcomers 
about "relay" and generic WIDES paths etc.
But when talk comes around to "making your path such to only make it into 
an IGATE" at the expense of the other users on RF only APRS network, then I 
think we are certainly selling out our RF network  at the expense of
creating an efficient IGATE network. I guess I am old enough to remember in
APRS that if you didn't have enough of a path, other stations didn't have a
clue that you existed. YMMV

Byron Smith
wa6ylb@theworks.com

http://www.theworks.com/~wa6ylb

What was the best thing before sliced bread?

----------------------------------------------------------------------

Subject: Re: Map of hops (cool)
From:     Jeff King <jeff@aerodata.net>
Date: Tue, 21 Jan 2003 22:49:25 -0500
X-Message-Number: 18

>QRM?
>That depends.

Yeap, it always does, depending on if your giving or receiving.

Listen California Hams, I just said the gentlemen contributed a good tool
to APRS. Use it as you may. It is fairly clear to me, I just made the
mistake of stating the obvious.

-Jeff

----------------------------------------------------------------------

Subject: APRS for OziExplorer...
From: "Darryl Smith" <Darryl@radio-active.net.au>
Date: Wed, 22 Jan 2003 16:05:24 +1100
X-Message-Number: 19

People

I have just placed a copy of the ALPHA version of my APRS for OziExplorer.
This software will connect to an iGATE and display positions in
OziExplorer. It will also allow a single station to be tracked.

At the moment there is an issue with OziExplorer, and any stations uploaded
to OziExplorer after the first 999 have been uploaded will result in
undefined results.

Some screen dumps and software is available from 
	http://www.radio-active.net.au/web/gpsaprs/oziaprs.html

Darryl VK2TDS

---------
Darryl Smith, VK2TDS   POBox 169 Ingleburn NSW 2565 Australia
Mobile Number 0412 929 634 [+61 4 12 929 634 International] 
Darryl@radio-active.net.au | www.radio-active.net.au  

----------------------------------------------------------------------



Read previous mail | Read next mail


 16.11.2026 12:13:42lGo back Go up