OpenBCM V1.13 (Linux)

Packet Radio Mailbox

DB0FHN

[JN59NK Nuernberg]

 Login: GUEST





  
ZL3AI  > APRDIG   03.02.03 14:28l 249 Lines 9235 Bytes #999 (0) @ WW
BID : 764-ZL3AI
Read: GUEST
Subj: TAPR Digest, Jan 22, 3/5
Path: DB0FHN<DB0RGB<OK0PPL<RZ6HXA<IK1ZNW<ON0AR<ZL2BAU<ZL3VML
Sent: 030125/1015Z @:ZL3VML.#80.NZL.OC #:58083 [Chch-NZ] FBB7.00i $:764-ZL3AI
From: ZL3AI@ZL3VML.#80.NZL.OC
To  : APRDIG@WW

Subject: Re: new IGATE on the way!
From: "Charles H. Rahe, II" <crahe@infi.net>
Date: Wed, 22 Jan 2003 18:01:19 -0500
X-Message-Number: 19

Joe-
Spend the $xx for UI-View32. It's the best windows APRS software
available. Easy to setup & stable. I've run it as an Igate with a dialup 
with no problems. It also runs great with AGWPE for a sound card TNC. 
I'll look forward to using your new igate this summer when the boat goes 
back in.
Charlie, AI3L

----------------------------------------------------------------------

Subject: Re: Map of hops (cool)
From: "Alton" <n5psp@n5psp.org>
Date: Wed, 22 Jan 2003 17:05:38 -0600
X-Message-Number: 20

Yes. I'd love to see such a map of Texas and New Mexico.

On 21 Jan 2003, at 15:18, James Jefferson wrote:

>Scott Miller suggested last week that it would be possible to datamine
>aprsworld.net to create a map of the number of hops required for a
>packet to reach an igate. I've done that for California and I wanted to
>share the results with everyone.
> 
>http://aprsworld.net/data/igate-hops/
> 
>There is a thumbnail of the map at that page with links to a PDF and
>JPEG version of the map. They are ~1 and ~2 megabytes respectively.
> 
>Let me know if this is useful and I will automate the process so you can
>request such a map for whatever area you are interested in.
> 
>-Jim KB0THN

----------------------------------------------------------------------

Subject: Re: new IGATE on the way!
From: Reid Crowe <kc0idi@yahoo.com>
Date: Wed, 22 Jan 2003 15:07:36 -0800 (PST)
X-Message-Number: 21

Do you have just a scanner?  That will get people off RF to the internet.
If thats all you would like to do with it that will work fine.  But you can
also put people form the internet to RF.  For example if your friend wanted
the club to see where he was at on his trip then you would need a
transceiver.  Also it would help with getting "EMAIL" messages sent out
too. Pat Karp <pkarp@conwaycorp.net> wrote:A computer will help - hi

Seriously have you ran APRS+SA 24/7 ? If not then give it a try to see if
it will run stable enough on your system with out crashing. I hear a lot
about the unstableness on WinAPRS however not heard much on APRS+SA. If you
have problems with is crashing then you can try UI-view32 or one of the
Linux apps. UIview is easy to setup and is really stable. I ran XASTIR for
about a year. It really was too stable. hihi I went through the learning
experience of installing Linux and XASTIR then never had to mess with it.
Then came time for an upgrade and could not remember anything that I learned
the previous year. So I decided to see what was available for windows and
found UIview. and have been using it every since. 8) You should find
both to be affordible.
73
Pat

----------------------------------------------------------------------

Subject: Re: new IGATE on the way! (CQ AA3JY)
From: "Rich Garcia" <k4gps@bellsouth.net>
Date: Wed, 22 Jan 2003 18:11:41 -0500
X-Message-Number: 22

You can't tell if a station is a IGATE or not unless they have the proper
ICON for it and still that is not 100%. With some detective work on the path
statements you see on findu you can get a good idea who is the IGATE.
Currently it appears to be N3GXH-1 in your area but there may be more.

Clay has a few stations, I am not sure exactly which is the one in PA but I
know one of them was a Igate and HF gate for many many years. Could be he
took one down, give it a couple of days he was on the list.

Rich

----------------------------------------------------------------------

Subject: HF APRSers
From: John Mc Hugh <johnk.mchugh@worldnet.att.net>
Date: Wed, 22 Jan 2003 18:16:45 -0500
X-Message-Number: 23

Hi all you HF APRSers,

Just want to let you know that last week I was in Dominica setting up an HF
gateway that soon will have some WX stations added to it. So zoom out on
the map and look towards the Southeast for some J73 stations.

Also, anyone know of any good APRS maps for the Caribbean and individual
islands

--
John Mc Hugh, KU4GY
Coordinator for Amateur Radio
National Hurricane Center, W4EHW
Home page:- http://www.fiu.edu/orgs/w4ehw

----------------------------------------------------------------------

Subject: Re: new IGATE on the way!
From: "AE5PL Lists" <HamLists@ametx.com>
Date: Wed, 22 Jan 2003 17:15:42 -0600
X-Message-Number: 24

I have used APRS+SA as a full, bidirectional IGate, 24/7, for years.  I
have found it to be stable and provides a clean feed to APRS-IS.  The
only reason my IGate is ever restarted is because I upgrade APRS+SA or I
upgrade the OS.

UI-View is a nice package.  However, since you already have APRS+SA,
there is no need to change applications as APRS+SA will prove to be a
very reliable package in your operation.

73,

Pete Loveall AE5PL
pete@ae5pl.net

----------------------------------------------------------------------

Subject: Re: new IGATE on the way!
From: Steve Dimse <k4hg@tapr.org>
Date: Wed, 22 Jan 2003 18:27:27 -0500
X-Message-Number: 25

On 1/22/03 at 6:00 PM k4gps@bellsouth.net (Rich Garcia) sent:

>Joe mentioned that he was very near AA3JY (couple of miles) and I believe
>AA3JY is a IGate 24/7 no need in that case to duplicate every RF packet on
>the IS. The internet has a lot of bandwith but EVERYTHING has limitations
>and eventually if we have too many Igates that are so close to each
>other(unecessary)the stream will slow down quite a bit without good cause.

A bigger concern is the effect of multiple IGates on local RF
traffic...when a message is to be IGated to rf, All local IGates will
transmit the message, each with whatever it's default path is. Multiple
messages increase the load on the channel at best, and prevent delivery of
the message due to collisions (at worst).

Steve K4HG

----------------------------------------------------------------------

Subject: UI-View32 question
From: "Dakota Summerhawk" <wypcguy@hotmail.com>
Date: Wed, 22 Jan 2003 16:32:37 -0700
X-Message-Number: 26

Does the program allow you to edit what port you can connect to?
I know that the Win aprs Igate dosent and it would be nice to connect to the
local port here instead of another state. But besides the port for the Win
aprs fails in the connect attempt anyways. The old version of Win aprs you
could edit the server list to choose your connection, can you do that with
this program?

Thanks
Peter N0WRE

----------------------------------------------------------------------

Subject: Re: new IGATE on the way!
From: Steve Dimse <k4hg@tapr.org>
Date: Wed, 22 Jan 2003 18:32:32 -0500
X-Message-Number: 27

On 1/22/03 at 5:58 PM joe@dellabarba.com (Joe Della Barba) sent:

>http://www.findu.com/cgi-bin/find.cgi?AA3JY
>
>Is this station the IGATE? Not the same as
>http://www.findu.com/cgi-bin/find.cgi?AA3JY-4.

The two nearby IGates seem to be kd7qot-7 and n3gxh-1. 

The question is not one of simple distance, but rather of missing coverage.
Are there packets being digipeated by aa3jy-4 which are not making it to
the internet? If so, then there may be a reason to add another IGate. If
there are not a significant number of such packets, then no reason to add
another IGate.

Here's an idea for a potentially useful tool, one that connects to the APRS
IS and a TNC, looking for packets heard by the TNC that do not already
appear on the APRS IS, and producing statistics...would not be too hard to
implement.

Steve K4HG

----------------------------------------------------------------------

Subject: Re: new IGATE on the way!
From: "Joe Della Barba" <joe@dellabarba.com>
Date: Wed, 22 Jan 2003 18:58:08 -0500
X-Message-Number: 28

Lately the local IGATE situation seems to be much better. Awhile ago I had
to use something like RELAY, WIDE3-3 to make it in reliably, and that was
getting gated everywhere from Norfolk to Syracuse. Maybe I don't need to set
this up. It also sounds like I should do it via 2 way radio if I do. I did
just look at my last position in FINDU and I made it in via KF4HJW in
Newport News, VA. This is well over 100 miles from my QTH. The local IGATES
are maybe not 24/7?
Another question. I think I would use a transmit path of VIA AA3JY-4 and
thus get pretty good coverage without saturating the network with a bunch of
wides. Can I filter what I send and receive from the internet to only
service stations within say 20 or 30 miles of my QTH?
Thanks,
Joe
73 de N3HGB-5

----------------------------------------------------------------------

Subject: Re: new IGATE on the way!
From: "hasan schiers" <schiers@netins.net>
Date: Wed, 22 Jan 2003 18:08:08 -0600
X-Message-Number: 29

APRS+SA is VERY STABLE and a sterling performer as an Igate.

It is resource intensive and sluggish....those are it's only drawbacks.

UI-View32 is fast, efficient and stable. I highly recommend it.

.....hasan, N0AN

----------------------------------------------------------------------

Subject: Re: UI-View32 question
From: "Spider" <spider@rivcom.net>
Date: Wed, 22 Jan 2003 17:07:52 -0700
X-Message-Number: 30

----- Original Message -----
From: "Dakota Summerhawk" <wypcguy@hotmail.com>
To: "TAPR APRS Special Interest Group" <aprssig@lists.tapr.org>
Sent: Wednesday, January 22, 2003 4:32 PM


Read previous mail | Read next mail


 16.11.2026 12:25:37lGo back Go up