OpenBCM V1.13 (Linux)

Packet Radio Mailbox

DB0FHN

[JN59NK Nuernberg]

 Login: GUEST





  
ZL3AI  > APRDIG   03.02.03 10:02l 253 Lines 10278 Bytes #999 (0) @ WW
BID : 816-ZL3AI
Read: GUEST
Subj: TAPR Digest, Jan 29, 3/6
Path: DB0FHN<DB0ZWI<DB0CHZ<DB0ERF<DB0FBB<DB0GOS<ON0AR<ON0AR<ZL2BAU<ZL3VML
Sent: 030202/0904Z @:ZL3VML.#80.NZL.OC #:58658 [Chch-NZ] FBB7.00i $:816-ZL3AI
From: ZL3AI@ZL3VML.#80.NZL.OC
To  : APRDIG@WW

Subject: EMAIL
From: Gonzales Andy <agonzales@arc.nasa.gov>
Date: Wed, 29 Jan 2003 12:01:09 -0800
X-Message-Number: 20

My name is Andy Gonzales and I am the project manager of the Kitty Hawk 3
Project at NASA / Ames Research Center. We design, build and test
prototypes of Mars Airplanes and flight test them at altitudes over 100,000ft.

My original query concered tracking air or spaceborne objects but  as I
have gotten into the other traffic from this group and searched some more
on the web, I ran into the capability to send an email FROM a radio station
INTO the internet TO a computer. Is it possible (and allowable without
being a licensed radio operator) to send emails FROM a computer OUT OF the
internet and TO a radio station ?

I can go both ways with text messages to / from my cell phone.
-- 
Andy Gonzales
NASA / Ames Research Center
Moffett Field, CA  94035-1000
Bldg. N-244, Rm. 240

MS 244-19
agonzales@arc.nasa.gov
650-604-0309

----------------------------------------------------------------------

Subject: Re: EMAIL
From: "Curt Mills, WE7U" <hacker@tc.fluke.com>
Date: Wed, 29 Jan 2003 12:10:16 -0800 (PST)
X-Message-Number: 21

On Wed, 29 Jan 2003, Gonzales Andy wrote:

>Is it possible (and
>allowable without being a licensed radio operator) to send emails
>FROM a computer OUT OF the internet and TO a radio station ?

It's possible and allowable, ONLY IF the message is checked first by
a ham.  This makes it tricky.

If it's NOT checked by a ham before it's allowed out, it comes under
the category of a non-ham directly causing the keying of a ham
transmitter, which is not allowed under U.S. rules.

-- 
Curt Mills, WE7U                    hacker_NO_SPAM_@tc.fluke.com
Senior Methods Engineer/SysAdmin
"Lotto:    A tax on people who are bad at math!"
"Windows:  Microsoft's tax on computer illiterates!" -- WE7U
"The world DOES revolve around me:  I picked the coordinate system!"

----------------------------------------------------------------------

[duplicate]

----------------------------------------------------------------------

Subject: Re: SATELLITE RADIO STATION
From: "Jake" <snakyjake2@hotmail.com>
Date: Wed, 29 Jan 2003 13:25:25 -0800
X-Message-Number: 23

Hello Fernando,

Your welcome.  Always happy to help if I can.  I'm quite new to operating on
the satellites and haven't yet experimented with voice communications.  From
what I've seen, antennas and Doppler effects voice communication quite a
bit.  For APRS I'm also still working on which pass is a good pass that I
can receive information on.  So far, only success above 70 degrees.  But
then again, I live in an area with lots of trees, mountains, hills, and
buildings.  I have much experimentation to do, and wish I can offer
something definitive.

What may be very beneficial is to have your class do some experimentations.
Experimenting with different passes and recording the quality of each one.
What antennas may work better for simple handheld use.  Which satellites
work best.  I would love to see some sort of Satellite APRS Guide paper some
day.  In fact, I wouldn't mind helping out, if I can come up with some more
time for it.  Also, your class is more than welcome to contact me via APRS
to make some contacts if they'd like as well.

I provided some Internet links of useful sights to help get you started.
This weekend I intend to spend some more time and discipline to be available
when a satellite passes over.  My goal is to determine which pass elevation
and range I'm successful at receiving packets.  Another goal of mine is
still to determine which satellites have stable APRS stations.  And also,
I'd love to be able to actually send a packet to one, but haven't had that
success.  Either my path is wrong, or my signal is too weak.

As you can see, I'm novice in this area and have much experimentation to do.

http://homepages.ihug.co.nz/~jpsl/downloads/Guide_May_2002.PDF
http://www.amsat.org/amsat/intro/faqs.html
http://www.amsat.org/amsat/ftp/articles/intro/resguide.pdf
http://www.amsat.org/amsat/ftp/articles/intro/easysat.pdf

Good look Fernando, and I'll share as much as I can when I learn more about
it.

Jake
WA7JAK
Seattle, WA  USA

----------------------------------------------------------------------

Subject: Re: EMAIL
From: Bill Vodall - WA7NWP <wa7nwp@yahoo.com>
Date: Wed, 29 Jan 2003 14:16:24 -0800
X-Message-Number: 24

At 12:10 PM 1/29/03 -0800, Curt Mills, WE7U wrote:
>On Wed, 29 Jan 2003, Gonzales Andy wrote:
>
>>Is it possible (and
>>allowable without being a licensed radio operator) to send emails
>>FROM a computer OUT OF the internet and TO a radio station ?
>
>It's possible and allowable, ONLY IF the message is checked first by
>a ham.  This makes it tricky.
>
>If it's NOT checked by a ham before it's allowed out, it comes under
>the category of a non-ham directly causing the keying of a ham
>transmitter, which is not allowed under U.S. rules.
>
>-- 
>Curt Mills, WE7U                    hacker_NO_SPAM_@tc.fluke.com

(Hi Curt - bet you knew I'd have to jump in on this one...)

As with most "legalese", there are varying opinions and it's not exactly
the Black and White issue that Curt's stating here.  I and others believe
that it's entirely possible for non-ham traffic to be gated automatically
to RF while still being completely under the control of the station
operator - which is the legal requirement.

I can come up were several different schemes for sending Email from the
Internet as messages to APRS stations that would be "controlled".

The FCC is telling the hams to do neat and useful new stuff and to use
common sense when it comes to making use (note keyword "use") of our
allocations.

Allowing HTMLized porn spam on the air is abuse.  Allowing a few one line
messages in a controlled situation is neat and useful.  That's a good
thing.

73,
Bill,  WA7NWP

----------------------------------------------------------------------

Subject: Re: EMAIL
From: "Rich Garcia" <k4gps@bellsouth.net>
Date: Wed, 29 Jan 2003 17:31:09 -0800
X-Message-Number: 25

I did not follow the full thread but remember even though some may call it a
gray area it is not all that gray. The APRS IS is designed to ONLY ALLOW
licensed amateurs to pass traffic over to RF. I believe all APRS flavors
make sure of this either through paid validation for the program or a
specific request to the author with proof that you are a ham.

And yes if someone get's technical you can pass positions from the Internet
to RF but only if a ham Igate set's up their program correctly or uploads
the information manually then it is not a gray area anymore. I ahve seen
people do this with CWOP data. This only applies to positions, I don't know
of any way to do it with e-mails.

Rich K4GPS

----------------------------------------------------------------------

Subject: RE: Big Digis - another idea
From: Henk de Groot <henk.de.groot@hetnet.nl>
Date: Wed, 29 Jan 2003 20:20:47 +0100
X-Message-Number: 26

At 13:08 26-1-03 -0700, Earl Needham wrote:
>At 10:03 PM 1/14/2003 -0500, Bob Bruninga wrote:
>>On Tue, 14 Jan 2003, Bill Vodall - WA7NWP wrote:
>><snip>
>>>2.  Here's a bit of a different twist.  DON'T uses these big digi's as a
>>>WIDE or WIDEn-n system.  Run them simply as "RELAY" plus their local
>>>call and alias. They will then pick up mobiles out in the boonies and
>>
>>Hey, now that is a new twist and is actually very good!  It supports the
>>mobile and in general is not in the path for everyone else that doesnt
>>need it...  Good thinking...
>
>I think it may only "half" support the mobiles.  In the wide open
>spaces, someone with a mobile will never see the other users unless they
>use a path ending in "RELAY"...

You can fill in the other half of this too! In DIGI_NED for example there 
is an option to declair a port "local" by means of the "local:" rule. This 
is meant for digipeaters that cover black spots (area's without coverage). 
You want to get packets in and out that area with a minimum additional 
channel load for the surrounding network outside the blackspot.

Assum this "fill" digi covers the black spot and can also see the nearby 
main digi.

What it does is the following:

1) I acts as complete WIDE (does not realy matter, in the black spot this 
is the only visible digi). Stations do not need adjustment when they travel 
through the black spot.

2) When a packet is received *direct* then it is assumed to come from a 
station inside the black spot and digipeated as normal. This way the 
station in the black spot can reach the outside world with a full path (one 
hop used of course).

3) When a packet is received *indirectly* then it is assumed to come from 
the main digi (where else should it come from?) and digipeated with a path 
completely marked as "used". Stations in the black spot can now hear the 
signals, the black spot is not a black spot anymore.

Signals can be heard inside the blackspot, but of course it will also leak 
to other high stations which are not in the blackspot area. Because the 
path is completely marked as "used", it will not be picked up by other 
digis that hear the "fill" digi. Those other digis will already have 
received the signal from the main digi, there is no use to digipeat the 
signal from the "fill" digi.

In other words: for stations in the blackspot the "fill" digi helps to get 
the signal out with a full path; signals received outside the digi are 
retransmitted only in the black spot. Ideally this "fill" digi should have 
a low power, just enough to have a good signal inside the blackspot and to 
reach the main digi, not more. It can be low power because it there are no 
other signals in the black spot (otherwise it would not be a black spot), 
except from other stations in the black spot (normal concurrency as 
everywhere in APRS).

This way you have 2 way communication with a minimum ammount of load... 
This was build-in more that 2 years ago on request of a user to have 
coverage in cities, where buildings create a lot of black spots. Maybe this 
also works on a mountain top... Its a pure "end-point" digi, no transit 
traffic can pass throug it.

Kind regards,

Henk.

----------------------------------------------------------------------



Read previous mail | Read next mail


 16.11.2026 14:43:48lGo back Go up