| |
ZL3AI > APRDIG 03.02.03 07:29l 225 Lines 7975 Bytes #999 (0) @ WW
BID : 813-ZL3AI
Read: GUEST
Subj: TAPR Digest, Jan 28, 6/6
Path: DB0FHN<DB0RGB<OK0PPL<RZ6HXA<IK1ZNW<IR0NET<VK3TE<ZL2BAU<ZL3VML
Sent: 030201/0956Z @:ZL3VML.#80.NZL.OC #:58560 [Chch-NZ] FBB7.00i $:813-ZL3AI
From: ZL3AI@ZL3VML.#80.NZL.OC
To : APRDIG@WW
Subject: THD7a and AWGPE
From: "Pat Karp" <pkarp@conwaycorp.net>
Date: Tue, 28 Jan 2003 18:49:44 -0600
X-Message-Number: 41
Has anyone used AWGPE with THD7a? If so could you send me some into on
your setup?
Thanks
Pat
----------------------------------------------------------------------
Subject: Re: Backbone Spec WAS: RE: APRS Symbols
From: Bob Bruninga <bruninga@usna.edu>
Date: Tue, 28 Jan 2003 20:15:17 -0500 (EST)
X-Message-Number: 42
On Tue, 28 Jan 2003, Pat Karp wrote:
>I posted this a few days ago that I started a APRS backbone yahoo group.
I appreciate the initiatve... but im not sure why we migh need another
group to subscribe to?
I think backbone discussion is one of the most important conecepts to be
discussed in APRS these days, so why not just do it here?
Just wondering...
Bob
----------------------------------------------------------------------
Subject: GPS Jammed by junk consumer electronics...
From: WA8LMF2@aol.com
Date: Tue, 28 Jan 2003 20:57:00 EST
X-Message-Number: 43
GPS JAMMING TRACED TO TV ANTENNA PREAMPLIFIERS
It was a mariner's nightmare at times in Monterey Bay's Moss Landing
Harbor when unwanted interference effectively rendered global
positioning system receivers useless for hours at a time. Local
engineers, sometimes assisted by federal authorities, launched a furtive
search for the source of the jamming, ultimately locating three almost
identical VHF/UHF television amplifiers with built-in preamplifiers.
(GPS World)
http://www.gpsworld.com/gpsworld/content/contentDetail.jsp?id=43404
----------------------------------------------------------------------
Subject: Re: GPS Jammed by junk consumer electronics...
From: "Mike Yetsko" <myetsko@insydesw.com>
Date: Tue, 28 Jan 2003 21:05:08 -0500
X-Message-Number: 44
A number of years ago there was a Radio Shack TV amplifier traced as the
source of jamming to a NUMBER of receivers nearby.
In that case, it was a 300 ohm antenna mounted amplifier.
One practice back then was for people to make their installation
appear 'neat' by 'taping' the input cable and the output cable together.
Not a good idea for 300-ohm unshielded twinlead!
I seem to recall that the resultant interference was finally tracked down
and identified by a repeater owner MANY MILES from the antenna
after he got fed up with the 'jamming'.
Thing is, there really wasn't anything wrong with the amp. It was a
problem with the installation!
Mike
----------------------------------------------------------------------
[commercial content deleted]
----------------------------------------------------------------------
Subject: TCP/IP Connects
From: JD Delancy <W1JD@drix.net>
Date: Tue, 28 Jan 2003 23:04:41 -0500
X-Message-Number: 46
I tried to use the TCP connect (Settings -> TCP/IP Connections -> Connect
to ARPServe Network). All of them came up with TCP fail. The internet
connection is fine, see and use everything I want. Has the APRS TCP/IP
service and functionallity changed or been deleted?
jd
----------------------------------------------------------------------
[commercial content deleted]
----------------------------------------------------------------------
Subject: Re: Backbone Spec WAS: RE: APRS Symbols
From: "Pat Karp" <pkarp@conwaycorp.net>
Date: Tue, 28 Jan 2003 22:22:53 -0600
X-Message-Number: 48
>I appreciate the initiatve... but im not sure why we migh need another
>group to subscribe to?
I hope it will offer folks who wish to take an Active part in creating a
backbone system a place where they can discuss the issues involve without
distractions. It will also cut down on the unwanted Email for those folks
who have no interest in an APRS backbone system.
>I think backbone discussion is one of the most important conecepts to be
>discussed in APRS these days, so why not just do it here?
I agree, Would that not make it more necessary to move the discussion
to a place where only those actively interested in its development would
participate? With luck this group will be organize and more productive
It would be great to draw from the resources that are present here how
ever I feel the size of this group would be more of a hindrance when
actually
working on specific aspects of this project.
>Just wondering...
hehe All Great Thinkers start off by "Just wondering"
>Bob
----------------------------------------------------------------------
Subject: Re: TCP/IP Connects
From: "Pat Karp" <pkarp@conwaycorp.net>
Date: Tue, 28 Jan 2003 22:27:00 -0600
X-Message-Number: 49
What APRS application and version are you useing?
----------------------------------------------------------------------
Subject: RE: APRS Symbols (versus Windows ICONS)..
From: Neil Johnson <njohnsn@iowatelecom.net>
Date: Tue, 28 Jan 2003 22:37:47 -0600
X-Message-Number: 50
On Tuesday 28 January 2003 08:39 am, Juergen Frank wrote:
>Again: don't show it with colors, it's not possible on B&W clients!
Never forget that there are a significant number of people who are
color-blind.
My notes from a recent user-interface design class points to the site
http://more.btexact.com/people/rigdence/colours/index.htm
for good (but somewhat technical) information and suggestions.
There they state that 8% of males and (but only 0.4% of women) have some
kind of color-blindness. That's a pretty significant number of people.
The most common form color blindness is the inability to perceive green
components of color accurately (about 5% of males).
Most people assume that means that people can't tell red from green, but in
reality it effects the perception of all colors since green is a component.
The site gives approximates of what a images look like to color-blind person.
http://more.btexact.com/people/rigdence/colours/Transf.htm
They also give an recommendation for choosing colors for alarm conditions
showing how they would look to a color-blind and non-color-blind persons.
http://more.btexact.com/people/rigdence/colours/AlarmColours.gif
Still, most user interface design experts recommend augmenting color with
symbols to aid perception by color-blind persons.
I actually enjoyed the class a lot. They went into the physlogical and
psychological issues involved in designing user interfaces.
It has also made me VERY sensitive to bad user interfaces (both computer and
non-computer).
I will NEVER again be embarrased when I pull a door that needs to be pushed.
It's the damn door designer's fault ! :)
--
Neil Johnson, N0SFH
(Who just learned his 5 year-old may be somewhat color-blind. No biggie, it
runs in my wife's family, and wasn't unexpected)
http://www.iowatelecom.net/~njohnsn
http://www.njohnsn.com/
PGP key available on request.
----------------------------------------------------------------------
Subject: Re: Backbone Spec WAS: RE: APRS Symbols
From: "Rich Garcia" <k4gps@bellsouth.net>
Date: Tue, 28 Jan 2003 23:39:56 -0800
X-Message-Number: 51
Even though the backbone issue I believe is important it can create a high
ammount of traffic that 90% of the list may not have interest in. Even I,
with some interst in the topic have found the ammount of mail to be somewhat
high lately and when you have 6-10 mailing lists coming in it can be a lot.
Also on that topic let me just say... can't we all get along ? I know a lot
of people have vested interest in these topics and as an art form passion
can run high. Everyone on the list may not understand all of the bickering
history and it may turn a lot of new and old users alike off.
Another reason that a specific list could come in handy. Those who join the
list will most probably know most of the history behind APRS and have been
involved for a long time. These people will have a bit thicker skin and
understand when the knives, guns and flame throwers are drawn from holsters
it is a deep passion coming to a head nothing else.
Rich K4GPS
---
END OF DIGEST
Read previous mail | Read next mail
| |