| |
ZL3AI > APRDIG 28.12.00 03:41l 183 Lines 5582 Bytes #999 (0) @ WW
BID : 35232_ZL3AI
Read: GUEST
Subj: TAPR Digest, Dec 25, 2/2
Path: DB0ABH<DB0RGB<DB0MRW<DB0HOT<DB0ERF<DB0SHG<DB0CL<DB0HES<OZ7BOX<OZ2DIZ<
RV3DHC<HA3PG<PP5BLU<PY3KW<ZL2TZE<ZL2TZE<ZL2WA<ZL2BAU<ZL3VML
Sent: 001225/2317Z @:ZL3VML.#80.NZL.OC #:51626 [Chch-NZ] FBB7.00g25 $:35232_ZL3
From: ZL3AI@ZL3VML.#80.NZL.OC
To : APRDIG@WW
linux software ( http://www.melhuishs.freeserve.co.uk/simon/projects/oww/ )
with a little glue code to the aprsd software, and thus have a weather node
that is substantially cheaper than the Davis systems, for example.
- Rich
--
Catapultam habeo. Nisi pecuniam omnem mihi dabis, ad caput tuum saxum
immane mittam.
Where's Rich? http://www.findu.com/cgi-bin/find.cgi?aa2ys
----------------------------------------------------------------------
Subject: Re: PAGERS
From: Bob Bruninga <bruninga@usna.edu>
Date: Mon, 25 Dec 2000 18:06:35 -0500 (EST)
X-Message-Number: 5
Because of Kantronics backwards implementation, that is why we *strongly*
receommend leaving UIFLOOD 30, NO ID. IF "NO-ID" is set, then the KPC3
will NOT screw up the path. SO if everyone then uses the path of
WIDE,WIDEn-N, then their path will always arrive with the identify of the
FIRST digipeater in the string.
This is the best way, because no matter where a packet comes from and even
if it is only a MESSGE or a STATUS, you can still tell what is his first
digi...
bob
On Sun,
24 Dec 2000 K5QQ@aol.com wrote:
> In a message dated 12/24/2000 3:34:24 PM Mountain Standard Time,
> KD5XB@AMSAT.ORG writes:
>
> > WIDEn-N
> > doesn't show the first repeater the tracker hits, only the LAST one before
> > your screen. At least, that's how the digis are set up ALL OVER New
> Mexico..
> > .
>
>
> Hi Earl
>
> That's the way the UIDIGI function works in the Kantronics implementation.
> >From the KPC3+ manual; "...the UIDIGI call in the to-be-digipeated field
will > be replaced by MYCALL with the H bit set and the packet will be
digipeated."
>
> So it's this way everywhere Kantronics TNC's (At least KPC3's) are used as
> standalone digipeaters.
>
>
> Catch you later
>
> Jim K5QQ
>
> ---
> You are currently subscribed to aprssig as: bruninga@usna.edu
> To unsubscribe send a blank email to leave-aprssig-18700I@lists.tapr.org
> Questions regarding the SIG go to the SIG administrator: wa1lou@tapr.org
>
>
de WB4APR@amsat.org, Bob
See my APRS LIVE pages http://web.usna.navy.mil/~bruninga/aprs.html
See APRS SATELLITES http://web.usna.navy.mil/~bruninga/astars.html
See MIM/Mic-E/Mic-Lite http://www.tapr.org/tapr/html/mic-e.html
----------------------------------------------------------------------
Subject: Re: 10 Meter 300 baud APRS
From: Skip Allison <sallison@megsinet.net>
Date: Mon, 25 Dec 2000 17:13:11 -0600
X-Message-Number: 6
Michael Francoeur wrote:
>
> Is anyone doing 300 baud APRS on 10 meters? If so, what frequency?
It doesn't appear that there is a standard for 10M APRS. I've seen
posts from various people of 10M APRS activity on the following
frequencies:
28.151 LSB
28.1877 LSB
28.185 LSB
28.195 LSB
28.2948 LSB
28.297 LSB
We really ought to try to standardize a freq. I don't have a
preference. Anybody have and reasons why a particular freq should be
used? I've had my RatShack rig on 28.297 LSB for a while and have never
heard anything so I gave up. Should we use different freqs for 1200 and
300 or should we use the same? Maybe 28.185 for 300 and 28.297 for
1200???
Skip
K9SA
----------------------------------------------------------------------
Subject: Installing Win95 on laptop WITHOUT a cdrom drive.
From: Qrpvhf@aol.com
Date: Mon, 25 Dec 2000 20:34:38 EST
X-Message-Number: 7
A few eeks ago I was asking about how to install Windows95 onto a older
laptop without a cdrom drive, well over the weekend myself and N8UEV tried a
experiment and it worked great.
First we took a 100meg ZIP disk and transfered the "Win95" directory onto the
ZIP disk, next we setup the laptop to access the ZIP drive, then we
transfered the "Win95" directory onto the hard drive of the laptop (79MB of
data total). After ZIP to HD transfer was finished we de-installed the ZIP
drive software as well as all other un-needed software down to just dos-based
system and adjusted the autoexec.bat & config.sys files.
After a cold restart, went to the "Win95" directory and ran setup as usual.
After about 45 minutes, we had a complete installation of Win95 onto my old
486SLC2/50 laptop which has since been running as the K8JWT APRS station
without any trouble.
We did use the compact installation of Win95 since the laptop's HD is only
250MB.
Also saved the ZIP disk as we can use it over again to install on other
computers.
Hope to get with N8UEV to setup a ZIP disk of the Precision Mapping
directories and files needed to transfer over to the laptop so as to use
there maps instead of DOS/TIGER maps.
MY PERSONAL RECOMENDATION: BUY A PARALLEL PORT ZIP DRIVE! ! !
Jacob Tennant,K8JWT
----------------------------------------------------------------------
Subject: Re: 10 Meter 300 baud APRS
From: "Michael Francoeur" <n1naf@mint.net>
Date: Mon, 25 Dec 2000 20:56:50 -0500
X-Message-Number: 8
I agree, The APRS sig should standardize and publish frequencies for each HF
band. As for 10 meters, I think we should keep the 300 baud and 1200 baud
packet on separate frequencies to minimize the QRM. Other than that, I'm
open to what the group decides on what those frequencies should be.
- Mike/N1NAF
----------------------------------------------------------------------
Subject: Re: 10 Meter 300 baud APRS
From: Wally Foster <wfoster@hsc.usc.edu>
Date: Mon, 25 Dec 2000 18:00:54 -0800
X-Message-Number: 9
A better reason for keeping separate frequencies is that 300 and 1200
are NOT compatible like 1220 and 9k6..
---
END OF DIGEST
Read previous mail | Read next mail
| |