| |
ZL3AI > APRS 23.11.00 15:30l 242 Lines 8056 Bytes #999 (0) @ WW
BID : 34500_ZL3AI
Read: GUEST
Subj: TAPR Digest, Nov 20, 2/4
Path: DB0MRW<OK0PKL<OK0PPR<OK0PRG<OK0POK<9A0YRB<HA5OB<HA3PG<PP5BLU<PY3KW<
ZL2TZE<ZL2TZE<ZL2WA<ZL2BAU<ZL3VML
Sent: 001121/1437Z @:ZL3VML.#80.NZL.OC #:48035 [Chch-NZ] FBB7.00g25 $:34500_ZL3
From: ZL3AI@ZL3VML.#80.NZL.OC
To : APRS@WW
>But Wes, you're depending upon every APRS "jurisdiction" to be transmitting
>the NWS info and/or every place to have an IGATE doing the same thing. I'm
>afraid you're giving the impression that everyplace you go with APRS has
>that type of Wx info available ready to be received. Not something to
>depend upon APRS for. Better to keep a portable WeatherRadio with SAME
>encoding and/or all 7 NOAA WxRadio channels.
That's a good point. I used to issue weather alerts here,
but I no longer do so, for several reasons. But the point is,
they're not available in this area, and many others.
Earl
Earl Needham, KD5XB mailto:KD5XB@AMSAT.ORG
Clovis, New Mexico DM84jk N34d 25.446m W103d 12.700m (or so)
Pet peeve: breath is a noun, breathe is a verb (When you take a
breath, you breathe...)
----------------------------------------------------------------------
Subject: Service outage
From: "Jeff Brenton" <jeffb@espi.com>
Date: Mon, 20 Nov 2000 10:05:54 -0600
X-Message-Number: 8
Today, 20 November 2000, there will be a service interruption on several of
the sites we host. While http://dididahdahdidit.com and
http://xastir.dididahdahdidit.com will NOT be down, there might be some DNS
problems, especially for AOL users, since one of our 3 DNS servers is being
moved.
The change-over will start at 3pm CST (2100 UTC), and most DNS servers
should have all the updates completed within 3 hours. AOL holds onto DNS
information a lot longer than most (12 to 24 hours), so expect some
problems.
This change will NOT affect DNS for aprs.net, aprs.org or findu.com; Steve
and I took care of that last week.
Jeff Brenton
KA9VNV
Questionable web page: http://dididahdahdidit.com
----------------------------------------------------------------------
Subject: Re: NWS / EMWIN data
From: Ray Vaughan <ray@rayvaughan.com>
Date: Mon, 20 Nov 2000 11:35:39 -0500
X-Message-Number: 9
At 10:30 AM 11/20/00 -0500, Wes Johnston wrote:
>I had thought at one time that I could collect EMWIN data from SAME radios,
>but have not been able to find any sources of sample SAME data. I think a PIC
>processor that could decode the SAME data on 162.xxx and reformat the data
>into an APRS message would be a really slick trick. But alas, no one at the
>NWS offices I've written can provide me the data I need (maybe I'm just
>thick). Wouldn't this be a great project for the PIC-e????
Here's where you can find the official spec:
http://www.fcc.gov/eb/eas/rules.htm
Download the Word document, then look at page 5. The protocol is explained
there. The PIC might be the perfect solution sinc
e EAS uses non-standard modem tones.
----------------------------------------------------------------------
Subject: Selecting Message Path
From: Jonathan Kaplan <jonk@jskent.com>
Date: Mon, 20 Nov 2000 08:51:34 -0800
X-Message-Number: 10
Didn't get any answers the first time. Hopefully, someone who knows the
answer is out there now.
Hi all,
I'm connected to the Intenet via a DSL, as well as to 2 mtr via a TNC.
When I run WinAPRS 2.4.7 and select default path, the message I send goes
out through TCPIP, instead of 2 mtr. My default path is set to WIDE2-2. So is
there another way of selecting the path of a message?
Thanks 73
Jonathan
----------------------------------------------------------------------
Subject: GPS Antenna
From: "Lee Ciereszko" <n4tcw@yahoo.com>
Date: Mon, 20 Nov 2000 11:50:58 -0500
X-Message-Number: 11
Am looking for a small GPS antenna <1 in.(2.54mm). It can be OEM (no case)
as it will be mounted inside a tracker. Surplus OK.
Thanks,
Lee Ciereszko N4TCW
Find Lee: http://map.findu.com/n4tcw
----------------------------------------------------------------------
Subject: FW: Selecting Message Path
From: Peter Anderson <panderson@CenterPartners.com>
Date: Mon, 20 Nov 2000 10:03:19 -0700
X-Message-Number: 12
-----Original Message-----
From: Jonathan Kaplan [mailto:jonk@jskent.com]
Sent: Monday, November 20, 2000 9:52 AM
To: TAPR APRS Special Interest Group
Subject: [aprssig] Selecting Message Path
Didn't get any answers the first time. Hopefully, someone who knows the
answer is out there now.
Hi all,
I'm connected to the Intenet via a DSL, as well as to 2 mtr via a
TNC.
When I run WinAPRS 2.4.7 and select default path, the message I send goes
out through TCPIP, instead of 2 mtr. My default path is set to WIDE2-2. So
is
there another way of selecting the path of a message?
Thanks 73
Jonathan
---
You are currently subscribed to aprssig as: panderson@centerpartners.com
To unsubscribe send a blank email to leave-aprssig-18700I@lists.tapr.org
Questions regarding the SIG go to the SIG administrator: wa1lou@tapr.org
----------------------------------------------------------------------
Subject: Re: where's Wes? tripmate mods??
From: WA8LMF1@aol.com
Date: Mon, 20 Nov 2000 12:17:45 EST
X-Message-Number: 13
In a message dated 11/20/2000 6:05:26 AM Pacific Standard Time,
kd4rdb@usa.net writes:
> I think that the tripmate mod's
> page is however lost. Anyone have a copy of it or the pictures?
>
> Wes
I captured the Tripmate mod page into an Acrobat PDF file. If you are
interested, I can send you a copy.
----------------------------------------------------------------------
Subject: Some questions about APRSplus
From: WA8LMF1@aol.com
Date: Mon, 20 Nov 2000 12:25:58 EST
X-Message-Number: 14
1) While downloading the latest version of APRSplus (1.99 YF) from the TAPR
FTP site, I noticed a file D700.ZIP. Is this some additional component
required to make the Kenwood TM-D700 work correctly with APRSplus? [ I have
a TMD-700 mobile but so far have only used it in the "dumb" Mic-E
plug-in-a-GPS mode. I am now thinking about trying the full APRSplus route
with it ]
2) I am moving toward implementing a more-or-less permanent Igate at my
office QTH. I have access to an Internet T-1 through my LAN at my desktop
and have verified that it works. I am primarily interested in feeding
off-the-air local data INTO the net. I have no use for the "firehose" flood
of world-wide data that comes back from the aprs.net servers to me. In order
to minimize the traffic on our LAN (and for that matter on the aprs servers)
, I would like to set APRSplus to SEND TO the Internet but not request or
receive FROM the 'net. Is there some way to configure APRSplus to do this?
Stephen H. Smith Email: wa8lmf@aol.com
Homepage: http://members.aol.com/wa8lmf
Ham Page: http://members.aol.com/wa8lmf/ham
------------------------------------------------------------------------------
----------
| Radio Communications Systems Personal Computers
| Consulting and Systems Integration
| GPS Custom Mapping & Radio Coverage Surveys
| File Conversions MS-Windows Setups
------------------------------------------------------------------------------
-----------
----------------------------------------------------------------------
Subject: Re: Selecting Message Path
From: "Keith Kotch" <kotch@mpinet.net>
Date: Mon, 20 Nov 2000 12:33:57 -0500
X-Message-Number: 15
You may have a couple of problems. Is your TNC being initialized? Don't
connect to the internet and see if you can transmit. On the message screen
there are some check boxes so you can choose the path it's to take. Make
sure VHF is checked.
Try those and see if that works.
Keith
Keith Kotch
Ambient Design Consultants 407-673-1901
I'm a Ham too, Amateur Radio Call: KF4BXT
----- Original Message -----
From: Jonathan Kaplan <jonk@jskent.com>
Hi all,
I'm connected to the Intenet via a DSL, as well as to 2 mtr via a TNC.
When I run WinAPRS 2.4.7 and select default path, the message I send goes
out through TCPIP, instead of 2 mtr. My default path is set to WIDE2-2. So
is
there another way of selecting the path of a message?
----------------------------------------------------------------------
Subject: 11 Meter Trader spam
Read previous mail | Read next mail
| |