| |
ZL3AI > APRS 20.11.00 15:13l 219 Lines 6534 Bytes #999 (0) @ WW
BID : 34476_ZL3AI
Read: GUEST
Subj: TAPR Digest, Nov 16, 2/3
Path: DB0MRW<DB0SON<DB0SIF<DB0FHK<DB0BRI<DB0SM<PI8DAZ<PI8WFL<VE1DRG<IK1ZNW<
HA3PG<PP5BLU<PY3KW<ZL2TZE<ZL2TZE<ZL2WA<ZL2BAU<ZL3VML
Sent: 001117/1008Z @:ZL3VML.#80.NZL.OC #:47652 [Chch-NZ] FBB7.00g25 $:34476_ZL3
From: ZL3AI@ZL3VML.#80.NZL.OC
To : APRS@WW
cable to split off pin 9 (RI) from the DB-9, and ran that to the
mini-din
and grabbed the external keyboard voltage. Then in the unit I
disconnected the battery pack and put a standard 'push on' jumper
from the center pin of the battery connector (which is pin 9 on the
DB-9) to the +V pin. Now my unit always takes external power from
the cable.
I found that the TripMate takes a little longer to 'lock up' at the 5v
feed from
the laptop, but not THAT much longer. Sure, it might be nice to build
an external regulator at 6v, but having that fairly solid and secure 5v
feed
is pretty nice. If I did a regulator, I'd have to feed it 12v and then
bring
it down. And if it fails, there goes my TripMate. I'm fairly certain
the
laptop won't fail and toast my TripMate.
Mike
----------------------------------------------------------------------
Subject: Re: [GPS buffer?]
From: Robbie Robertson <mwrobertson@mediaone.net>
Date: Thu, 16 Nov 2000 11:28:47 -0600
X-Message-Number: 6
Thanks to all that have taken the time to respond to my post
on this "buffer"..
It appears that I need to get out the soldering iron and
experiment some more. I use no computer, except to change
parameters. The tnc, radio, and amp is on 24/7 as long as I
am not home. As I mentioned, I have the TripMate modified,
and is switched on and off with the ignition. This is a
great combination and I have over 8,000 miles in trips, plus
the local driving around logged with it...
Until I started helping a friend with basically the same
setup but using a Rand McNally gps, I hadn't realized this
was happening. His does the same thing thing. Not really
noticeable until you observe our tracks on Xastir which does
the tracking display a little different than WinAPRS or if
you set Winaprs to track a particular mobile!
I am leaning towards trying a suggestion by Earl, K9GD, of
adding a delay to turning off the gps which may allow the
gps to fill this darn buffer with a legit fix while the car
is parked and standing still for 5 or 10 minutes. I knew
this idea was discussed a long time ago. I now ill try it..
Again, thanks to all
Robbie wa9inf
----------------------------------------------------------------------
Subject: Re: [GPS buffer?]
From: "Earl S. Garber" <esgarber@teleport.com>
Date: Thu, 16 Nov 2000 11:21:21 -0800
X-Message-Number: 7
My tripmate puts me in one of two different places (both of
which I've never parked at) when initially powered up. The
previous location it had "stored" when I first started using it
was 1000 miles away - it has not been used with Street
Atlas at all.
Maybe someone should ask DeLorme this question...
....Earl, N3EG
----------------------------------------------------------------------
Subject: SatGATE
From: "Scott-KC5JGV" <kc5jgv@arrl.net>
Date: Thu, 16 Nov 2000 15:26:46 -0800
X-Message-Number: 8
I remember reading something about setting up a SatGATE for SUNSAT. Will the
KPC-9612 TNC work for that? Where can I find more info?
73,
Scott
Need Help with APRS?
http://www.aprshelp.com
Need a 12v computer for APRS?
http://www.compu-comm.com
----------------------------------------------------------------------
Subject: Leonids: Over 50 participants
From: "Ev Tupis (W2EV)" <propnet@greeceny.com>
Date: Thu, 16 Nov 2000 16:36:26 -0500
X-Message-Number: 9
....and counting! I know of several folks who haven't "registered" their
participation yet. The http://go.to/METEORegistry page shows 53. I'll
bet that we are over 60 in reality. This bodes well for successes...now
if only the meteors will oblidge us. :o)
Power up tonight and continue through the evening of morning of the
21st, if you can!
Ev, W2EV
147.585 -and- 53.53
----------------------------------------------------------------------
Subject: NWS Special Event
From: "Scott-KC5JGV" <kc5jgv@arrl.net>
Date: Thu, 16 Nov 2000 16:00:41 -0800
X-Message-Number: 10
How many of the APRSer's are going to setup and participate in this upcoming
special event? For more info on the event, go to:
http://www.nws.noaa.gov/event2000/
73,
Scott
Need Help with APRS?
http://www.aprshelp.com
Need a 12v computer for APRS?
http://www.compu-comm.com
----------------------------------------------------------------------
Subject: NWS event
From: "Guy Story" <gstory@iphase.com>
Date: Thu, 16 Nov 2000 16:30:15 -0600
X-Message-Number: 11
This is a multi-part message in MIME format.
------=_NextPart_000_001E_01C04FEA.80476CC0
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
Guys, I hate to bring up this can of worms, BUT. In the NWS event, are =
we going to have a problem with IGATES like we do with Field Day? I do =
not want to start another fight about FD and IGATES so please do not =
even think about it. All I am looking for is a yes or no answer.
73
Guy Story, KC5GOI
Interphase Corporation
13800 Senlac
Dallas Texas 75234
[html deleted]
----------------------------------------------------------------------
Subject: Re: UI VIew in Meteor Scatter mode.
From: Bob Bruninga <bruninga@usna.edu>
Date: Thu, 16 Nov 2000 18:01:13 -0500 (EST)
X-Message-Number: 12
Operating MScatter last night I noticed packets from a UIvew station that
were not in a decodable APRS format. The packet was:
W3MR>CQ154:W3MR [FM18ex] w3mr@erols.com
In order for this to be a valid APRS packet, the packet must begin with
the [GR##ID] format. As is, it was not decoded nor placed on the map.
I asked Roger Barker, author of UI view and he responded:
> The Meteor Mode beacon is user configurable.
So users of UI view need to be careful of how they set up their station or
they will not be seen by any other APRS programs.
de WB4APR, Bob
----------------------------------------------------------------------
Subject: Re: UI VIew in Meteor Scatter mode.
From: "Ev Tupis (W2EV)" <propnet@greeceny.com>
Date: Thu, 16 Nov 2000 18:52:16 -0500
X-Message-Number: 13
Bob Bruninga wrote:
> Operating MScatter last night I noticed packets from a UIvew station that
> were not in a decodable APRS format. The packet was:
>
> W3MR>CQ154:W3MR [FM18ex] w3mr@erols.com
As a point of clarification, though...this is an easy mistake to make. If you
are using UI-View, there is no need to re-enter your callsign in the Meteor
Mode Beacon Text field. In the example above, W3MR simply entered "W3MR
[FM18ex] w3mr@erols.com" in the Meteor Mode Beacon Text field, when he should
have entered "[FM18ex] w3mr@erols.com".
Read previous mail | Read next mail
| |