OpenBCM V1.13 (Linux)

Packet Radio Mailbox

DB0FHN

[JN59NK Nuernberg]

 Login: GUEST





  
ZL3AI  > APRS     20.11.00 15:09l 196 Lines 6564 Bytes #999 (0) @ WW
BID : 34474_ZL3AI
Read: GUEST
Subj: TAPR Digest, Nov 16, 1/3
Path: DB0MRW<DB0ERF<DB0FBB<DB0GOS<DB0PKE<DB0SM<PI8DAZ<PI8WFL<VE1DRG<IK1ZNW<
      HA3PG<PP5BLU<PY3KW<ZL2TZE<ZL2TZE<ZL2WA<ZL2BAU<ZL3VML
Sent: 001117/1003Z @:ZL3VML.#80.NZL.OC #:47651 [Chch-NZ] FBB7.00g25 $:34474_ZL3
From: ZL3AI@ZL3VML.#80.NZL.OC
To  : APRS@WW


TAPR APRS Special Interest Group Digest for Thursday, November 16, 2000.

1. New address for digipeater updates
2. Leonids Reminder
3. Tripmate GPS buffer?
4. Re: [GPS buffer?]
5. Re: [GPS buffer?]
6. Re: [GPS buffer?]
7. Re: [GPS buffer?]
8. SatGATE
9. Leonids: Over 50 participants
10. NWS Special Event
11. NWS event
12. Re: UI VIew in Meteor Scatter mode.
13. Re: UI VIew in Meteor Scatter mode.
14. Re: UI VIew in Meteor Scatter mode.
15. RE: NWS Special Event
16. RE: NWS Special Event
17. Re: [GPS buffer?]
18. Re: NWS Special Event

----------------------------------------------------------------------

Subject: New address for digipeater updates
From: "Jeff Brenton" <jeffb@espi.com>
Date: Thu, 16 Nov 2000 00:47:34 -0600
X-Message-Number: 1

Effective immediately, the new address for sending updates to the APRS
digipeater lists is digilist@dididahdahdidit.com , replacing the old
"digiman" address.

No, this is NOT a response to "digimOn". It is part of some other work we're
doing, and is a little more descriptive of the FUNCTION of this address. The
web page references will be changed shortly... probably before anyone reads
this notice.

"digiman" will work for a week or so, but please update your address lists.
Thanks!

Jeff Brenton, Amateur Radio call sign KA9VNV
http://espi.com
Questionable web page: http://dididahdahdidit.com
That strange feeling that you've never
done this before: http://uvajed.espi.com

"Modern Liberalism: The embodiment of an irrational fear of
letting other people run their own lives."



----------------------------------------------------------------------

Subject: Leonids Reminder
From: "Ev Tupis (W2EV)" <propnet@greeceny.com>
Date: Thu, 16 Nov 2000 06:49:22 -0500
X-Message-Number: 2

The Leonids will be peaking over the next two or three
days.  It's time to power-up, if you haven't already.

Notes:
* use 6-character grid-squares in your posit.  Some software
won't decode 4-character posits.

* register your operation on http://go.to/METEORegistry so
that we know where to point our antennas for best
opportunity of success (we're approaching 50 registrants
already!)

* us UI-View or APRSdos' Meteor Mode rather than the
manually configured WinAPRS method of old.  Your opportunity
for success will increase greatly.  Visit
http://go.to/BEACONet if you need UI-View software and setup
instructions

* most folks are powering up TONIGHT and running through the
20th.  JOIN US!  400 Watts of ERP at 147.585-MHz or
100-watts of ERP on 53.53-MHz will get you a marginal chance
of being heard.  More RF is better for this application.

Let's get transmitting! :o)

Ev, W2EV


----------------------------------------------------------------------

Subject: Tripmate GPS buffer?
From: "Dennis Hudson, N2LBT" <n2lbt@n2lbt.com>
Date: Thu, 16 Nov 2000 10:47:36 -0500
X-Message-Number: 3

> Wally Foster wrote:
>> 
>> Do you use this for a tracker only or has it been used with a computer
>> ?? I have seen this before.. When you close the program (all flavors)
>> the program sets a BT (beacon text) of the position at closing) and a BT
>> (beacon time (usually 30 mins)). Look at BT and B for possible answers
>> to your problem..
> 
> Thanks Wally, but it is a dumb tracker so to speak. I hooked
> it up to a computer only a couple times in the past two
> years.. The buffers are clear and clean, then I turn on the
> GPS. The BLT buffers immediately fill up with that 15 mile
> out of position beacon and remains 'til the gps obtains a
> true fix.. I think I need one...
> 
> 73!
> Robbie,  wa9inf

If it makes you feel any better I have a Tripmate and it acts exactly as
yours. The position appears to be the last time I used Street Atlas with the
tripmate. My answer was to wire the tripmate to the battery and leave it on.
It's been on since March. I have a Sears Die Hard Gold and a 200+amp
alternator, no problems yet. We'll see how the winter goes, we should have
our first cold spell and snow this weekend.

Dennis, N2LBT


----------------------------------------------------------------------

Subject: Re: [GPS buffer?]
From: Bill Tetens <bftet@netscape.net>
Date: 16 Nov 00 08:23:50 PST
X-Message-Number: 4

Robbie Robertson <mwrobertson@mediaone.net> wrote:
Hi, I am using a KPC-3+ and a TripMate tracker. The problem
I have is a buffer in the GPS dumping erroneous data into
the tnc every time it is turned on and until it obtains a
valid fix. This data is a valid fix, but 15 miles from my
home qth, so my plot on APRS jumps in a straight line to
that spot, and then another straight line back to me when I
get the valid fix.. =


Then everything seems fine until I park and turn off the gps
with the ignition.. I have CLEAR after each BLT, except for
the 4th buffer which is continuos every 30 minutes. My
friend is having similar problems, but he using a KPC-3+ and
Rand McNally gps??

Has anyone else had and solved this situation?? I have seen
this with others, but not that often...

Thanks in advance for any suggestions..
For what it may be worth when I first was getting my Trip Mate and KPC-3+=
 up
and running I had a problem with it showing my location wrong and it stay=
ed
there. I decided that the voltage I was supplying was incorrect.  I used =
a
variable power supply and found that the trip mate was real picky about t=
he
supply voltage.  I redone the regulator and set the voltage to 6.2 volts
exactly and it worked fine from then on.  I experimented to find the opti=
mum
voltage and it was the stated voltage.  If this is your problem it may re=
quire
another voltage.

Bill KB4ZM


---
You are currently subscribed to aprssig as: bftet@netscape.net
To unsubscribe send a blank email to leave-aprssig-18700I@lists.tapr.org
Questions regarding the SIG go to the SIG administrator: wa1lou@tapr.org


____________________________________________________________________
Get your own FREE, personal Netscape WebMail account today at http://home=
=2Enetscape.com/webmail

----------------------------------------------------------------------

Subject: Re: [GPS buffer?]
From: "Mike Yetsko" <myetsko@insydesw.com>
Date: Thu, 16 Nov 2000 11:43:54 -0500
X-Message-Number: 5

I've not run my TripMate on a variable, but I've been told by people
that should know (they've burned one up) that just above 8v will
trash the thing.

4 new alkalines are about 6v, and my TripMate seemed to work best
with that.  Although it would work just fine down at a REGULATED 5v,
as in the keyboard mini-din connector on my laptop.  I made up a



Read previous mail | Read next mail


 16.11.2026 22:12:51lGo back Go up