| |
ZL3AI > APRS 13.11.00 04:00l 196 Lines 6991 Bytes #999 (0) @ WW
BID : 34403_ZL3AI
Read: GUEST
Subj: TAPR Digest, Nov 09, 3/5
Path: DB0MRW<DB0RGB<OK0PPL<OK0POK<9A0YRB<HI8GN<HR2PAQ<KA6EYH<HA3PG<WB0TAX<
N5VDA<N9DBX<KF9UG<N8ZFM<ZL2TZE<ZL2TZE<ZL2WA<ZL2BAU<ZL3VML
Sent: 001111/1118Z @:ZL3VML.#80.NZL.OC #:47075 [Chch-NZ] FBB7.00g25 $:34403_ZL3
From: ZL3AI@ZL3VML.#80.NZL.OC
To : APRS@WW
I remember when they first started putting rumble strips at toolbooth
approaches. A small percentage of people were pulling to the shoulder and
jumping out of their cars, assuming that they had blown a tire or broken
something in the suspension. It got their attention.
>...After you load Logitech Mouseware 9.2 and the iFeel software the
>scroll wheel works very sluggishly. Same results when I plugged in my old
>non-iFeel mouse. I use the scroll wheel a lot, so for me the
>Mouseware/iFeel software is useless.
Our test mouse is installed on an Intel based P-200 MMX running on
Win98SE. To get the Logitech mouse and iFeel drivers to install properly
we had to deinstall the old mouse (trackball drivers) and then we had no
problems. The mouse wheel works as it's supposed to (advances 3 lines per
click of the scroll wheel and is quite snappy).
>I may keep it to use as a plain mouse, but I think the iFeel stuff needs
>some refinement, and the drivers need some fixing.
Just like any emergent technology, the first production models are bound to
need refinement. What I did find was that you first install the iFeel
drivers it defaults to the highest tactile feedback setting, which is
overpowering. By turning down the sensitivity it became more useful. I
also noticed that there are themes in the "immersion" software and you
customize how much and when feedback is given.
If tactile feedback mice are to gain popular acceptance - software
developers are going to have to incorporate features to take advantage of
it. In WinAPRS I can think of all sorts of things that could be incorporated:
Tactile warnings or alarms.
Tactile "Morse" code.
Tactile Stations.
73,
Mark
KC7BXS
----------------------------------------------------------------------
Subject: Re: City names on findu
From: Bob Bruninga <bruninga@usna.edu>
Date: Thu, 9 Nov 2000 15:51:40 -0500 (EST)
X-Message-Number: 14
Here's your copy...
bob
On Thu, 9 Nov 2000, Bob Bruninga wrote:
> Here is some stuff from Steve about Findu:
>
> ---------- Forwarded message ----------
> From: Steve Dimse <sdimse@netrox.net>
>
> I have added city names to the find cgi, I think this is a big
> improvement. The database is about 5000 of the largest cities in the
> world, it seems to be a pretty good compromise between speed and
> resolution. I still need to change this to show direction as well as
> distance from the city, but wanted to release this as soon as possible.
>
> I also have returned the raw packet display to the cgi by popular
> request. Among other things it will allow display of position comments
> sent by D7 and D700 users.
>
> Comments welcome as always, but I am not subscribed to the sig, please
> email me directly at:
>
> k4hg@tapr.org
>
> Steve K4HG
>
> P.S. For those that have expressed appreciation in the past (and are over
> 18 years of age) there are new Fantasy Fest pics on my web site:
>
> http://www.aprs.net/FantFest2000/
>
>
>
> ---
> You are currently subscribed to aprssig as: bruninga@usna.edu
> To unsubscribe send a blank email to leave-aprssig-18700I@lists.tapr.org
> Questions regarding the SIG go to the SIG administrator: wa1lou@tapr.org
>
>
APRSdos REPLY/COMMENT:
Reply mail addr: wb4apr@amsat.org
US mail address: 115 old Farm Ct, Glen Burnie, MD 21060
See DAYTON97 HISTORY: http://web.usna.navy.mil/~bruninga/dayton.html
See Maryland APRS LIVE: http://web.usna.navy.mil/~bruninga/aprs.html
See GPS on ANY radio: http://www.tapr.org/tapr/html/mic-e.html
----------------------------------------------------------------------
Subject: Re: New product
From: "Jim King" <jim@jimking.net>
Date: Thu, 9 Nov 2000 15:05:38 -0600
X-Message-Number: 15
Mark Fellhauer wrote:
> At 07:44 AM 11/9/00, Jim King wrote:
> I think that proves the technology is working. The mouse felt like it was
> sticking when it hit clickable areas on the screen - and that's exactly
> what it's supposed to do. Of course if you're not aware of a device's
> tactile feedback capability you might think something was wrong. Suppose
> you trained a pilot and then put him in an aircraft with a stick shaker
> without ever telling him about them. I imagine the first time it
activated
> it' would scare the bejeezus out of him, and he'd probably assume
something
> had gone terribly wrong with the aircraft. You have to inform and train
> (stick shakers can give false warnings).
But what Logitech has done is given me a stick shaker that feels exactly
like a malfunctioning airplane (i.e. the iFeel mouse feels like a mechanical
mouse that needs to be cleaned/thrown away). In this case the pilot isn't
getting something he's never experienced before, he's getting something that
his experience tells him means that the plane is about to fall out of the
sky. What's the point of that?
> The first time I drove a car with ABS and had occasion to really tromp on
> the brakes, I was pleasantly surprised to find the manufacturer had
> provided a "buzz box" on the brake pedal, letting me know that the ABS was
> functioning. But I had read the owner's manual and was aware of the
feature.
What would your reaction have been if the buzz box was instead something
that sounded just like worn brake pads?
> I remember when they first started putting rumble strips at toolbooth
> approaches. A small percentage of people were pulling to the shoulder and
> jumping out of their cars, assuming that they had blown a tire or broken
> something in the suspension. It got their attention.
Different levels of attention-grabbing are needed for "Slow down - you're
approaching a tool booth" and "Your mouse pointer just passed over a toolbar
button".
> >...After you load Logitech Mouseware 9.2 and the iFeel software the
> >scroll wheel works very sluggishly. Same results when I plugged in my
old
> >non-iFeel mouse. I use the scroll wheel a lot, so for me the
> >Mouseware/iFeel software is useless.
>
> Our test mouse is installed on an Intel based P-200 MMX running on
> Win98SE. To get the Logitech mouse and iFeel drivers to install properly
> we had to deinstall the old mouse (trackball drivers) and then we had no
> problems. The mouse wheel works as it's supposed to (advances 3 lines per
> click of the scroll wheel and is quite snappy).
This may be an OS issue - I'm running Windows 2000. Perhaps Logitech's
drivers don't work as well on Win2000 as they do on Win98.
> If tactile feedback mice are to gain popular acceptance - software
> developers are going to have to incorporate features to take advantage of
> it. In WinAPRS I can think of all sorts of things that could be
incorporated:
>
> Tactile warnings or alarms.
> Tactile "Morse" code.
> Tactile Stations.
I agree - there's a lot of potential. But I think most people are going to
try it with Logitech's default settings and software and not be happy with
it.
Jim KD5LUQ
Read previous mail | Read next mail
| |