| |
ZL3AI > APRS 13.11.00 04:00l 205 Lines 6531 Bytes #999 (0) @ WW
BID : 34414_ZL3AI
Read: GUEST
Subj: TAPR Digest, Nov 10, 1/3
Path: DB0MRW<DB0RGB<OK0PPL<OK0POK<9A0YRB<HI8GN<HR2PAQ<KA6EYH<HA3PG<WB0TAX<
N5VDA<N9DBX<KF9UG<N8ZFM<ZL2TZE<ZL2TZE<ZL2WA<ZL2BAU<ZL3VML
Sent: 001111/1145Z @:ZL3VML.#80.NZL.OC #:47078 [Chch-NZ] FBB7.00g25 $:34414_ZL3
From: ZL3AI@ZL3VML.#80.NZL.OC
To : APRS@WW
TAPR APRS Special Interest Group Digest for Friday, November 10, 2000.
1. Almost 30 Leonids Registrants!
2. Re: Mac Word Map H/M/Lo
3. Propnet-Leonids
4. Re: FW: Re: WinAPRS user interface
5. Kenwood DM-700 Volume Control
6. Re: Kenwood DM-700 Volume Control
7. [Fwd: [aprsspec] WAP available thru findu.com]
8. New Altoids Tin
9. ADMIN: Monthly Reminder
10. Refresh screen in APRSDos 842?
11. Another NASA Leonids balloon
12. Decpding MacAPRS downloads???
13. Re: Decpding MacAPRS downloads???
14. Stuffit 5.5
15. APRS+SA Beta 1.99YF
16. By george I think I got it!!!
----------------------------------------------------------------------
Subject: Almost 30 Leonids Registrants!
From: "Ev Tupis (W2EV)" <propnet@greeceny.com>
Date: Fri, 10 Nov 2000 06:52:34 -0500
X-Message-Number: 1
If you are planning on being LeonidsActive (grin)
then be sure to register your intent so that others
will know. A good number of participants are
positioning themselves for greater success by using
a small beam (and some folks are using beams that
aren't so small <smile>). Registering your
participation may help them to know where to point
for the best chance of success!
If you have been lurking, and still need directions
for getting LeonidsActive, visit http://go.to/BEACONet.
There you will find instructions ans software for using
UI-View (for windows computers).
APRSdos also has a meteor mode. I'm hoping that someone
will float the full instructions for using it, too. The
more, the merrier!
If you would like to register your particpation (no
matter what software that you use), then simply visit
http://go.to/METEORegistry (thanks Rich Parry [W9IF]
for this great resource!)
Ev, W2EV
ps: more discussion on Leonids activity may be had on
TAPR's PropNET/BEACONet listserve. Join us there, too!
----------------------------------------------------------------------
Subject: Re: Mac Word Map H/M/Lo
From: "Clark A. Lowry N7AAC" <N7AAC@aztenx.org>
Date: Fri, 10 Nov 2000 06:12:23 -0700
X-Message-Number: 2
Use Fetch or Anarchie. I have made Anarchie my "default" FTP helper
application.
At 19:49 -0800 11/9/00, Matthew Stennett wrote:
>WHY is it every time I try to download the Mac World Map, it starts
>to OPEN it as a SIMPLE TEXT ? file ?
>
>I see a title start to print, then, coded text making up the map I presume.
>
>How to get this sucker downloaded correctly ?
>
>MacRatt Matt
>
>
>_______________________________________________________________________
>
>Free Unlimited Internet Access! Try it now!
>http://www.zdnet.com/downloads/altavista/index.html
>
>_______________________________________________________________________
>
>
>---
>You are currently subscribed to aprssig as: n7aac@aztenx.org
>To unsubscribe send a blank email to leave-aprssig-18700I@lists.tapr.org
>Questions regarding the SIG go to the SIG administrator: wa1lou@tapr.org
----------------------------------------------------------------------
Subject: Propnet-Leonids
From: "Smith, Tim" <n1btq@ne.mediaone.net>
Date: Fri, 10 Nov 2000 08:34:15 -0500
X-Message-Number: 3
N1TI-2 is on 147.585 running 45 watts to a 6 db gain vertical at 30 feet,
Level 1, TNC only
N1TI-6 is on 53.53 running 80 watts to a halo at 20 feet, Level 1, TNC only
Plans to go to Level 2 with software supporting meteor mode before the
event...hopefully this weekend. Plans to replace halo with vertical as well
but at least it's on the air for now.
73,
Tim N1TI
---------------------------------------------
#Level 1 Config
#KPC3+ (v8.3):
my n1ti-6
int term
bt [FN41NP] rt_smith@yahoo.com
be 10
uitr hop,60
da yymmddhhmm
mh clear
----------------------------------------------------------------------
Subject: Re: FW: Re: WinAPRS user interface
From: Mark Sproul <msproul@jove.rutgers.edu>
Date: Fri, 10 Nov 2000 09:34:11 -0500
X-Message-Number: 4
Dear Kevin
First I want to say that I think I understand some of your concerns
and am planning on addressing some of them.
HOWEVER, I would like to point out something that I consider to be
very important, that is that WinAPRS is a 32 bit application. It
always has been. The definition of a 32 bit application is one that
is compiled as a Win95 native application and uses the flat memory
model instead of the segmented memory model of Windows 3.1
What WinAPRS is not, is that it is NOT built with Microsoft tools.
It is built using CodeWarrior. CodeWarrior is a very good compiler
that runs on the Mac, Windows, Linux and Solaris. It is a C/C++
compiler. Everything that I do in WinAPRS is to the Windows
specifications. I use WINDOWS dialog definitions, Windows tool box
calls, etc, etc. But I do it from my own code, not utilizing MFC or
Microsoft Visual C++.
Keith and I are going to spend the next couple of months going over
the many user interface comments that poeple have been making and do
what we can. We both have have been very swamped with work this
year, I made a very significant career change, and we have not had
the time that we would like to put into APRS.
Sincerely
Mark Sproul
>----------
>From: kbrown@powerhouseproductions.com (Kevin Brown)
>Date: Wed, 8 Nov 2000 16:48:37 -0600
>To: "TAPR APRS Special Interest Group" <aprssig@lists.tapr.org>
>Subject: [aprssig] Re: WinAPRS user interface
>
>
>: >
>: > We -TRY- to make the WinAPRS user interface as best as we can to the
>: > Windows way of doing stuff. Sometimes that is a lot tougher than the
>: > user would imagine..
>: >
>
>I too have been told this before when I raised some questions about WinAPRS
>and was told it was a port using a Mac to Windows tool rather than two
>different code sources. I think *that* has a lot to do with it.
>
>I've given up on WinAPRS, but would quickly pay the registration fee over
>again if it would be released as a TRUE win32 application (not just a port
>from some gee-whiz wizard tool). It needs to comply with some of the most
>fundamental windows api's.
>
>If someone else would develope a windows-based client in this same vain,
>with the same functionality as claimed by WinAPRS, I'd jump up and down
>about it.
>
>
>
>---
>You are currently subscribed to aprssig as: N2MPM@WORLDNET.ATT.NET
>To unsubscribe send a blank email to leave-aprssig-18700I@lists.tapr.org
>Questions regarding the SIG go to the SIG administrator: wa1lou@tapr.org
--
------------------------------------------------------------------
Mark Sproul | msproul@jove.rutgers.edu
Read previous mail | Read next mail
| |