OpenBCM V1.13 (Linux)

Packet Radio Mailbox

DB0FHN

[JN59NK Nuernberg]

 Login: GUEST





  
ZL3AI  > APRS     09.11.00 12:31l 194 Lines 6618 Bytes #999 (0) @ WW
BID : 34372_ZL3AI
Read: GUEST
Subj: TAPR Digest, Nov 06, 4/5
Path: DB0MRW<DB0ERF<DB0BRI<DB0HAG<DB0ACH<ON0RAT<ON5VL<LX0HST<HA3PG<7M3TJZ<
      LZ3NP<ZS6RO<ZL3VML
Sent: 001107/1014Z @:ZL3VML.#80.NZL.OC #:46641 [Chch-NZ] FBB7.00g25 $:34372_ZL3
From: ZL3AI@ZL3VML.#80.NZL.OC
To  : APRS@WW


Subject: Re: New Tiny Web Pages
From: John Gorkos <jgorkos@san-carlos.rms.slb.com>
Date: Mon, 06 Nov 2000 14:33:51 -0500
X-Message-Number: 16

"Thomas M. Schaefer" wrote:
> I had been thinking of a server to do airline flight info. Particularly
> useful would be gate arrival and time info. Something like: send a message
<snip>
> found a generic one. Anyone like to hack this out in Perl?
> 

The problem here is that it requires a real-time web query to give the
requested data.  The probability of it working drops dramatically when
you do this, and the lag time between the request and the response goes
way up, depending on web-traffic on and off the airline server.

Also, people begin to depend on stuff like that.  If the server dies or
a connection drops, I don't get death threats when people can't see NCAA
football scores.  But when someone decides to blame me for them wasting
60 minutes at the airport because my flight time server was down or
wrong, it dampens my enthusiasm to do more like this.

John Gorkos

----------------------------------------------------------------------

Subject: pinout for the TMV7A
From: Robert W Burton <kd4ydc@juno.com>
Date: Mon, 6 Nov 2000 05:54:11 -0500
X-Message-Number: 17

Does anyone know the pinouts used for a TMV7A (or the TMG707) for the 
data port to the serial port?  I have the data port but really need the
serial
port end.
Thanks,
Robert
KD4YDC

________________________________________________________________
YOU'RE PAYING TOO MUCH FOR THE INTERNET!
Juno now offers FREE Internet Access!
Try it today - there's no risk!  For your FREE software, visit:
http://dl.www.juno.com/get/tagj.

----------------------------------------------------------------------

Subject: Re: Trig problem
From: tarnerich@in-situ.com (Tony Arnerich)
Date: Mon, 6 Nov 2000 16:42:35 -0700
X-Message-Number: 18


Wes Johnston wrote:
>

> I am trying to model an indoor GPS "like" system.  I want to have 
"satellites"
> mounted in the corners of a room which send a burst of IR light and an
> ultrasonic pulse at the same time.
[snip]

Interesting project, I bet there's a lot you could manage to learn along the 
way if you structure the solution around several things you don't yet know 
how to do.

One thing you're going to encounter is an enormous number of reflections. In 
the cases of Polaroid cameras, ultrasonic tape measures, and back-up warning 
license plate frames the solution was dead easy: the first reflection is the 
one with the shortest path and is therefore the correct one to use (assuming 
you have the silly thing pointed the right way first! <g>). To keep things 
simple they probably used a single pulse (usually from a single source).

So you might want to be sure to keep the pulses from each of your beacon 
stations apart from each other. There's a number of ways you can force the 
separations. Maybe you might use a clocked strobe to sync them; 1st optical 
pulse in a cluster triggers Beacon A, 2nd triggers beacon B, etc. Without 
that time separation you'd have no idea which was a 1st possible reception of 
a given pulse, as opposed to a reflection of one that started earlier.

Because of the overlap from the reflections you'd have a real interesting 
time doing things the way it's done with GPS, the pseudorandom bit sequence 
and all that. Pseudorandom mush is what you'd probably get.

If you haven't read it already, find a copy of "Longitude" by Dava Sobel. 
You'll really appreciate the problem you set for yourself when you see what 
was faced way back when.

73,
Tony  KD7TA



----------------------------------------------------------------------

Subject: Re: pinout for the TMV7A
From: K5QQ@aol.com
Date: Mon, 6 Nov 2000 19:12:20 EST
X-Message-Number: 19

In a message dated 11/6/2000 4:03:52 PM Mountain Standard Time, 
kd4ydc@juno.com writes:

> Does anyone know the pinouts used for a TMV7A (or the TMG707) for the 
>  data port to the serial port?  I have the data port but really need the
>  serial  port end.

I'm a bit confused by your desire to connect the data port directly to the 
'serial port' The output of the V7 is the analog signal from the 
discriminator (or shortly thereafter) and the input to the V7 is the analog 
input to be transmitted.  To convert those signal to data acceptable to be 
used on the serial port of a computer, you will need a TNC - assuming you 
want to look at the packet data you are receiving.  The computer connection 
on the TNC would connect directly to the serial port on the computer.   The 
data port on the V7 connects to the analog input/ouput/ptt on the TNC.

Hope that makes sense.  

Jim  K5QQ


----------------------------------------------------------------------

[commercial content deleted]

----------------------------------------------------------------------

Subject: Intervisiblity Plots
From: "Shane Justice" <sjustice7@home.com>
Date: Mon, 6 Nov 2000 19:51:39
X-Message-Number: 21

Dear SIG Group: 

Some time ago, perhaps a few weeks to a month ago, there was mention of a 
server that one could E-mail the lat and long, plus altitude of two sites 
and this server would send back an image map of the intervening terrain 
between the two points and would not any terrestrial interference.

Can someone please direct me to the site? I can not find reference to this 
information in my E-mail log.

Thanks so much,

73,
Shane
KE7TR

----------------------------------------------------------------------

Subject: Re: pinout for the TMV7A
From: Tate <kc7zru@arrl.net>
Date: Mon, 06 Nov 2000 19:27:32 -0700
X-Message-Number: 22

Ah, let me guess - you don't want to do RF data via the V7A's data port,
you want to use the Kenwood software to program your V7A from your PC,
right?

Well, in any case - the PC pinout for packet use is on the Kenwood FTP
site - look under the 'Connectors' directory. You're looking for a PDF
file that lists purt near every connector Kenwood has in current
production. Kinda handy. Find the 6 pin data plug on top of page 3.

If you're looking to use your PC to program your TM-V7A (or TM-G707)
visit my web site (URL is in the SIG block below). Follow the links to
the PG-4S "work-a-like" cable. Been using one here for over a year now -
pretty nice.

Mmm - might be a good idea to put a link to the "Connectors" PDF file on
my site - Thanks!

73

Robert W Burton wrote:
> 
> Does anyone know the pinouts used for a TMV7A (or the TMG707) for the
> data port to the serial port?  I have the data port but really need the
> serial
> port end.
> Thanks,
> Robert
> KD4YDC
> 


-- 



Read previous mail | Read next mail


 17.11.2026 02:05:38lGo back Go up