| |
ZL3AI > APRS 08.11.00 04:32l 207 Lines 7920 Bytes #999 (0) @ WW
BID : 34348_ZL3AI
Read: GUEST
Subj: TAPR Digest, Nov 04, 4/4
Path: DB0MRW<DB0RGB<DB0ABH<DB0CWS<DB0ZDF<DB0GE<LX0PAC<LX0HST<HA3PG<PP5BLU<
PY3KW<ZL2TZE<ZL2TZE<ZL2WA<ZL2BAU<ZL3VML
Sent: 001106/1144Z @:ZL3VML.#80.NZL.OC #:46525 [Chch-NZ] FBB7.00g25 $:34348_ZL3
From: ZL3AI@ZL3VML.#80.NZL.OC
To : APRS@WW
Subject: Prius Hybrid Electric Vehicle
From: Bob Bruninga <bruninga@usna.edu>
Date: Sat, 4 Nov 2000 20:42:42 -0500 (EST)
X-Message-Number: 17
Prius Hybrid Electric Car
Today I test drove a GPS Navigation system which had wrapped
around it a Toyota Prius Hybrid ELectric Vehicle. As the owner of
an Electric car myself, I found the vehicle to be both ideal, an
engineering marvel, ... and a great disappointment.
As a great little car that has 52 city and 45 Highway MPG, it is
great technology whose time has come. But its like Microsoft
Windows. The driver is so isolated from whats under the hood, that
you cannot enjoy any of it. ITS JUST A CAR.
You wouldn't even know it was electric except for the advertising and
the hype. A marvelous piece of engineering, but, like Windows, it
is designed to just BE A CAR. It goes and it stops. You control
it with a key in the ignition and a pedal for gas and a pedal for brakes.
Yes it has superdooper sound and navigation system and cup holders,
but like WIndows, its JUST A CAR.
Here is what I dont like about it:
1) The entire energy display on a full graphics color LCD display
consists only of 4 ICONS with blinking arrows between them. The
arrows show you if the wheels are being powered by the battery
or the engine. Duh....
2) You cant plug it into cheap electricity to charge. It charges while
it runs... (I'm on time-of-use electric with 3 cent KWH at nite)
which is far cheaper than using GAS to charge a battery!
3) You cannot use the human's anticipation of the road ahead to modify
the energy transfer thresholds. IE, one size-fits-all. Say you
are inching along in traffic and a downhill section is approaching.
You cannot decide to run on electric alone for another 10 seconds
to avoid having it auto switch to gas for just 10 seconds.
4) Under the hood you have a 30 KW generator. But you cannot use one
volt of it for anything else!
5) You cannot add additional battery capacity for some application where
you may want to run electric only (you cant switch manually anyway).
6) It runs on D-Cells! 228 NiMH cells for a system voltage of 273V.
(I assume D-cells since the entire battery is only about 30"x6"x8".)
(I therefore assume it is only about a 6 Amp-Hour battery. But at
(over 300 volts charged, thats still a lotta juice.)
SOmeday there will eventually be a hacker's WEB page that may
develop to take advantage of some of this neat stuff. But at $20,000
I doubt any hackers or curiosity types are going to hack their own
investment for the benefit of others.. I'd be affraid to touch it...
SO anyway, I spent the entire test drive trying to find something
that I could relate to... and found nothing.... its just another car.
SO I forgot to test the GPS Navigation system.. and its potential for
APRS (and the rational for this SIG mesage).
Oh yes, I'd love to find out how to write my own applications
for that bright LCD all-in-one display screen...
The good news is that I am now motivated to revitalize my old Vangard
Electric that has been off the road for 10 years. My motivation mostly
stems from my Boss's orders to "get rid of it". Due to the Governments
insistance that I cannot keep it overnight at work (there is an
ordnance agains it), and yet running around on campus is the only
viable application for it. It has sat in the WORK IMPOUND lot for
10 years because the State of Maryland demanded a mountain of
paperwork going back to the original manufacturer (out of business)
required to prove it is legal in Maryland which just made
it too hard. But! Yesterday someone told me that my procrastination
has just paid off! When it turned 25 years old last year, it qualifies
as an antique vehicle and NO INSPECTION OR CERTIFICATION IS REQUIRED!
But now all I gotta do is "get a round tuit"...
.... life goes on ;-)
de WB4APR, Bob
----------------------------------------------------------------------
Subject: Re: Kenwood TH-D7A(G) Model Software Problems - Continued
From: David VanHorn <dvanhorn@cedar.net>
Date: Sat, 04 Nov 2000 20:57:41 -0500
X-Message-Number: 18
>
>
> Any suggestions as to how to verify firmware upgrade and determine if the
> transmitter is defective?
AFAIK, the only way to tell firmware revs, is to compare what's in the menus.
They should have a firmware rev displayed at powerup, but they don't.
As to the TX, a wattmeter comes to mind. :)
--
Where's dave? http://www.findu.com/cgi-bin/find.cgi?kc6ete-9
----------------------------------------------------------------------
[commercial content deleted]
----------------------------------------------------------------------
Subject: Re: Kenwood TH-D7A(G) Model Software Problems - Continued
From: Robbie Robertson <mwrobertson@mediaone.net>
Date: Sat, 04 Nov 2000 21:43:51 -0600
X-Message-Number: 20
David VanHorn wrote:
>
> >
> >
> > Any suggestions as to how to verify firmware upgrade and determine if the
> > transmitter is defective?
>
> AFAIK, the only way to tell firmware revs, is to compare what's in the menus.
> They should have a firmware rev displayed at powerup, but they don't.
>
> As to the TX, a wattmeter comes to mind. :)
>
Wouldn't a check with Kenwood on the serial number be
indicated here? Why guess. Kenwood or someone else here
on the sig created a PDF file on the differences on
commands between these two rigs..
Robbie
--
----------------------------
Are we having fun yet?
73 - Robbie - WA9INF
******* --... ...-- *******
----------------------------------------------------------------------
Subject: APRS Survey 2000 - WOW - nearly 400 and counting
From: Richard Parry <rparry@qualcomm.com>
Date: Sat, 04 Nov 2000 20:14:49 -0800
X-Message-Number: 21
WOW! Nearly 400 of you have taken a few minutes to complete the APRS 2000
Survey at http://w9if.net/cgi-bin/aprssurvey/main.pl. I thank you each for
your time and enthusiasm. My criterion for success was 250 responses, I had
that number in the first 24 hours. WOW!
My new goal is responses from All States. I have responses from 45 of the
50 states. Anyone in Hawaii or South Dakota?
I will be making the results available at the end of the survey, but one of
the most surprising things for me is the large number of respondents
outside the US, nearly 25% (85 of 390). It wasn't all that long ago that
seeing an icon outside the US was pretty rare.
http://w9if.net/cgi-bin/aprssurvey/voter_profile2k.pl
For those who may have missed the announcement, I repeat it below.
thanks,
Rich Parry W9IF
===========================================================================
APRS Survey 2000 Now Open
First let me thank nearly 100 APRS folks that provided excellent feedback
for the APRS Survey 2000 web page. This project started 6 months with a
simple idea. I got input from Bob B, and other APRS movers and shakers. I
also got suggestions from amateurs on several APRS mailing lists. I hope
the results of our efforts show.
I feel the need to emphasize that this is not a popularity contest. It is
meant to foster communication between folks with similar equipment. I
provide it as a service in the hopes that some "good" may come from the
information. The survey is based on the honor system. To help prevent
skewing the results, the results will not be posted until the survey period
is over at the end November. However, you can see where the respondents
came from on a map of the US. An amateur radio callsign is required, but
you may remain anonymous if you wish.
APRS Survey 2000 http://w9if.net/cgi-bin/aprssurvey/main.pl
Getting a large number of respondents will aid in providing an accurate
cross-section of the APRS community. So thanks in advance to those that
complete the survey and spreading the word.
Rich Parry, W9IF
---
END OF DIGEST
Read previous mail | Read next mail
| |