| |
ZL3AI > APRS 08.11.00 04:23l 233 Lines 8060 Bytes #999 (0) @ WW
BID : 34346_ZL3AI
Read: GUEST
Subj: TAPR Digest, Nov 04, 3/4
Path: DB0MRW<DB0ERF<DB0FBB<DB0GOS<DB0HAG<DB0ACH<DB0OVN<ON5VL<LX0HST<HA3PG<
PP5BLU<PY3KW<ZL2TZE<ZL2TZE<ZL2WA<ZL2BAU<ZL3VML
Sent: 001106/1127Z @:ZL3VML.#80.NZL.OC #:46524 [Chch-NZ] FBB7.00g25 $:34346_ZL3
From: ZL3AI@ZL3VML.#80.NZL.OC
To : APRS@WW
I am trying to model an indoor GPS "like" system. I want to have
"satellites"
> mounted in the corners of a room which send a burst of IR light and an
> ultrasonic pulse at the same time. I intend to measure the distance from
> each
> of the satellites by timing the difference of arrival between the IR light
> and
> the ultrasonic bursts.
----------------------------------------------------------------------
Subject: RE: aprssig digest: November 03, 2000
From: Alan Heaberlin <amh@as.net>
Date: Sat, 4 Nov 2000 09:09:14 -0800
X-Message-Number: 11
Dan Gudgel is MIC at the San Joaquin Valley NWS in Hanford, CA. He is =
KF6MUG and they have had an APRS station running for over a year now.=20
Alan Heaberlin W6AMH
Mojave Desert=20
>=20
> Subject: NWS & APRS
> From: Robert Michaud <r.michaud@glumac-sf.com>
> Date: Fri, 3 Nov 2000 13:29:51 -0800
> X-Message-Number: 4
>=20
> Hi Folks,
>=20
> I recently attended Pacifcon (Pac region hamfest) in Northern Calif. =
and
> attended a NOAA/NWS seminar. The Meteorologist in Charge at the =
Monterey
> Forecast Office gave a talk about Skywarn. He has had successful =
experience
> with using Hams for Skywarn (via voice) in his last assignment. He is =
a ham
> and I asked him if he knew about APRS; he did not. I took it upon =
myself to
> explain in one or two sentences position & wx reporting; he was =
interested.
> When I explained to him that messages can be sent he was very =
interested. =20
>=20
> >From what I understand there is an APRS machine in the office of =
which he
> was unaware. There is a local ham which I have contacted to help get =
the
> ball rolling again.
>=20
> I need to hook him up with a Meteorologist in Charge who uses APRS in =
their
> local NWS Forecast Office. Ideally a ham but someone who can explain =
from a
> NWS point of view the specific usefulness of APRS.
>=20
> Can any one help? I have his business card with all the particulars.
>=20
> Robert, KD6INI
>=20
> ----------------------------------------------------------------------
>
----------------------------------------------------------------------
Subject: RE: Trig problem
From: "Steve Sampson" <S.Sampson@radio-link.net>
Date: Sat, 4 Nov 2000 11:28:33 -0600
X-Message-Number: 12
The problem seems overly complex because you are trying to
determine range using passive means. If you would look at an
active solution it may become easier.
When radar was developed (no I wasn't born yet, hee) one of
the problems that developed, was that you couldn't determine
if the target was friend or foe. This resulted in a transponder
solution. Another better transponder example is the TACAN,
VOR/DME, or just DME (Distance Measuring Equipment)
stations. These stations are located at known coordinates, and
each is on a different channel (regionally).
What you find with a DME is that up to 100 users can be on
any one station, and that they have to search for their own signal
in all the noise. So DME has a search mode, and a sync mode.
By wiggling your pulse back and forth a bit you can determine
which one is yours.
You can determine your azimuth off of a TACAN by coding
one of the pulses at true north, and determining your position
based on that. Generally there is a fixed delay in every DME
device, that you subtract (processing delay).
Using a small emitter (Poptronics has some cheap microwave
transmitters in the back ads) and a PIC, you could easily determine
your 2D position in a room, using two transponders on the walls
and a beacon in the moving unit.
----------------------------------------------------------------------
Subject: RE: Trig problem
From: "Mike Yetsko" <myetsko@insydesw.com>
Date: Sat, 4 Nov 2000 12:29:35 -0500
X-Message-Number: 13
One technique you can use to 'range' easily is to send a
signal that allow for syncronization. Like a light. Then
have at a precise time, a transmitter start sending a series
of pulses at precise time intervals. Now at the receive
end you need to know the time from transmission to the
time of arrival. Timing that may be 'tight' so to speak.
But if you set up a timer at the receive end at a very
close but NOT the same frequency, you can 'beat' it
against the incoming. Just like two trombones, with one
having a slide slightly out, it will go in and out of match.
But the match will be 'delayed' by the time the distance
travels. What you do it count the pulses till the 'match'
changes from late to early, or early to late, depending on
running faster or slower. And since you're looking for
a change, you can use a sort of quadrature detect, like
used in a mouse to detect direction of a wheel with two
pulse trains 90 degrees out of phase. Just trigger on one,
and just look for when the incoming changes from before
to after or vice versa.
Remember though, this has NOTHING to do with the
beat frequency, and nothing to do with doppler. It's the
'time to match' from the syncronized start that matters.
Mike
Mike
----------------------------------------------------------------------
Subject: NSTAR 00-B flight successful
From: "Mark Conner" <mconner1@home.com>
Date: Sat, 4 Nov 2000 15:28:17 -0600
X-Message-Number: 14
NSTAR Flight 00-B was successfully launched from Valley NWS at 1450 UTC
(0850 CST). Maximum altitude reported was 74,242 ft at 1600 UTC for an
average ascent rate of about 1040 ft/min. Landing was at 1629 UTC at
4112.50N 09511.72W, or about 3.5 miles WSW of Griswold, IA. The chase
vehicles were within a mile of the capsule at the time it landed.
The capsule landed in a harvested soybean field and was undamaged. The
chute deployment appeared good from the telemetry and from the configuration
on landing. The attached photo capsule had several good pictures during the
flight, but appeared to have shifted a bit on descent.
Thanks to all who participated -- at the launch site, during the chase, and
on the simplex repeater which was quite successful. I have the simplex
repeater audio captured on computer and will make this available on an audio
CD. I'll also compile a list of callsigns heard on the repeater.
73 de Mark N9XTN
Nebraska Stratospheric Amateur Radio (NSTAR)
http://members.home.net/mconner1/nstar.html
----------------------------------------------------------------------
Subject: 10M APRS
From: Skip Allison <sallison@megsinet.net>
Date: Sat, 04 Nov 2000 16:28:16 -0600
X-Message-Number: 15
I just got my HTX 10 cabled up to my KAM. Now I can't remember what 10
Meter freq people were using.
Also is there a 300 baud and a 1200 baud freq?
Skip
K9SA
----------------------------------------------------------------------
Subject: Kenwood TH-D7A(G) Model Software Problems - Continued
From: BordingK@aol.com
Date: Sat, 4 Nov 2000 19:13:45 EST
X-Message-Number: 16
--part1_aa.c8a8d56.27360039_boundary
Content-Type: text/plain; charset="US-ASCII"
Content-Transfer-Encoding: 7bit
Well, things keep getting stranger and stranger:
Bill, KG4JRP bought a supposedly new TH-D7A(G) from HRO and it arrived
Thursday. Receipt says its a "G model with upgraded CPU". So we fought for
two nights in a vain attempt to load freqs with the Kenwood G model software
- no luck.
It a desperate attempt I used the older A model software and it worked fine.
So we now doubt that this radio is really a G model.
Is there any means to verify the firmware version and if so what should a G
model firmware indicate?
Another problem is that the radio seems to have very poor transmitting power.
In a head to head test with my unmodified A model I get into repeaters far
better than this "new" G model. We swapped antennas, batteries, etc., and
the older radio works far better.
Very disappointing as Bill is a new ham and wants to get on the air.
Any suggestions as to how to verify firmware upgrade and determine if the
transmitter is defective?
Thanks in advance.
DE W5KNB
Ken
[html deleted]
----------------------------------------------------------------------
Read previous mail | Read next mail
| |