| |
ZL3AI > APRS 07.11.00 07:35l 259 Lines 8068 Bytes #999 (0) @ WW
BID : 34342_ZL3AI
Read: GUEST
Subj: TAPR Digest, Nov 04, 1/4
Path: DB0MRW<DB0RGB<OE5XBL<OE2XUM<OE5XBR<OE3XBS<OE6XYG<9A0BBS<9A0YRB<VK6BBS<
VK2CPG<VK2CZR<VK2IO<VK2GJB<ZL2TZE<ZL2TZE<ZL2WA<ZL2BAU<ZL3VML
Sent: 001105/1206Z @:ZL3VML.#80.NZL.OC #:46302 [Chch-NZ] FBB7.00g25 $:34342_ZL3
From: ZL3AI@ZL3VML.#80.NZL.OC
To : APRS@WW
TAPR APRS Special Interest Group Digest for Saturday, November 04, 2000.
1. RE: FINDU Status/comment
2. Re: Trig problem
3. Re: Trig problem
4. RE: FINDU Status/comment
5. Re: Trig problem
6. Snagged on BEACONet (147.585-MHz)
7. TH-D7A(G) Software Problems
8. RE: FINDU Status/comment
9. RE: FINDU Status/comment
10. RE: Trig problem
11. RE: aprssig digest: November 03, 2000
12. RE: Trig problem
13. RE: Trig problem
14. NSTAR 00-B flight successful
15. 10M APRS
16. Kenwood TH-D7A(G) Model Software Problems - Continued
17. Prius Hybrid Electric Vehicle
18. Re: Kenwood TH-D7A(G) Model Software Problems - Continued
19. Re: Want Ad - TNC wanted
20. Re: Kenwood TH-D7A(G) Model Software Problems - Continued
21. APRS Survey 2000 - WOW - nearly 400 and counting
----------------------------------------------------------------------
Subject: RE: FINDU Status/comment
From: Skip Allison <sallison@megsinet.net>
Date: Sat, 04 Nov 2000 00:21:18 -0600
X-Message-Number: 1
Bryan Jarvis wrote:
> .
..
> Is it possible to see the records for a callsign for
> say the last 3-hour period? The period could be user-
> definable.
>
> The display could be either on a map as is currently done,
> or strictly in a table form. That way, you could follow
> someone's progress on a trip.
>
Already there. Try:
http://www.findu.com/cgi-bin/rawposit.cgi?call=k9sa-9&start=24&length=12
Obviously insert your call and the start time and length.
Example starts 24 hours ago and runs for 12 hours.
It spits out a data file that can be loaded into WinAPRS or APRS+ to see
the track.
Skip
K9SA
----------------------------------------------------------------------
Subject: Re: Trig problem
From: Skip Allison <sallison@megsinet.net>
Date: Sat, 04 Nov 2000 00:39:08 -0600
X-Message-Number: 2
Wes Johnston wrote:
>
> I am trying to model an indoor GPS "like" system. I want to have "satellites"
> mounted in the corners of a room which send a burst of IR light and an
> ultrasonic pulse at the same time. I intend to measure the distance from each
> of the satellites by timing the difference of arrival between the IR light and
> the ultrasonic bursts. Suffice it to say that I know the distances from my
> position to each of the satellites. And I also know the positions of the
> satellites. How do I solve for my position? For starters we can assume a
>
Assuming the room is not real big - the distance to the IR source would
be maybe 10 feet. Have you calculated the time for the light to travel
10 ft? It would be on the order of .01 microseconds. So if you're 10'
from one IR and 5' from the other, the difference between the IR bursts
would be around .005 microseconds. Now look at the propagation delay
thru mose IC gates. There will probably be more variation than that.
Next question - do you really need to know where in the room the person
is - or just which room he's in?
Skip
K9SA
----------------------------------------------------------------------
Subject: Re: Trig problem
From: David VanHorn <dvanhorn@cedar.net>
Date: Sat, 04 Nov 2000 02:36:24 -0500
X-Message-Number: 3
>Assuming the room is not real big - the distance to the IR source would
>be maybe 10 feet. Have you calculated the time for the light to travel
>10 ft? It would be on the order of .01 microseconds. So if you're 10'
>from one IR and 5' from the other, the difference between the IR bursts
>would be around .005 microseconds. Now look at the propagation delay
>thru mose IC gates. There will probably be more variation than that.
The light is a reference. The ultrasonic arrives later, and that gives you
the distance to the pinger. Kinda cute.
--
Where's dave? http://www.findu.com/cgi-bin/find.cgi?kc6ete-9
----------------------------------------------------------------------
Subject: RE: FINDU Status/comment
From: "Steve Sampson" <S.Sampson@radio-link.net>
Date: Sat, 4 Nov 2000 05:11:50 -0600
X-Message-Number: 4
Completely undocumented.
----- Original Message -----
> Already there. Try:
> http://www.findu.com/cgi-bin/rawposit.cgi?call=k9sa-9&start=24&length=12
>
> Obviously insert your call and the start time and length.
> Example starts 24 hours ago and runs for 12 hours.
----------------------------------------------------------------------
Subject: Re: Trig problem
From: "Mike Yetsko" <myetsko@insydesw.com>
Date: Sat, 4 Nov 2000 07:26:54 -0500
X-Message-Number: 5
Sounds neat. But how do you keep the 4 transmitters
'separate'. Or does each one flash only at one time and
you know what the flashes are?
BTW, the October Circuit Celler Inc has an article on GPS.
Not on the 'satelite' side, but it can give you insight into how
to calculate things once you know where you are.
Gee, going to output standard NEMA?
Mike
>
> >Assuming the room is not real big - the distance to the IR source would
> >be maybe 10 feet. Have you calculated the time for the light to travel
> >10 ft? It would be on the order of .01 microseconds. So if you're 10'
> >from one IR and 5' from the other, the difference between the IR bursts
> >would be around .005 microseconds. Now look at the propagation delay
> >thru mose IC gates. There will probably be more variation than that.
>
> The light is a reference. The ultrasonic arrives later, and that gives
you
> the distance to the pinger. Kinda cute.
> --
> Where's dave? http://www.findu.com/cgi-bin/find.cgi?kc6ete-9
>
>
>
> ---
> You are currently subscribed to aprssig as: myetsko@insydesw.com
> To unsubscribe send a blank email to leave-aprssig-18700I@lists.tapr.org
> Questions regarding the SIG go to the SIG administrator: wa1lou@tapr.org
>
>
----------------------------------------------------------------------
Subject: Snagged on BEACONet (147.585-MHz)
From: "Ev Tupis (W2EV)" <propnet@greeceny.com>
Date: Fri, 03 Nov 2000 06:10:44 -0500
X-Message-Number: 6
Received on 147.585-MHz last night at 17:16 -- N2LZH in
FN23 at 105 miles to the east of FN03! The band must be
up with the approaching weather front from the west.
BEACONet works better with more people participating!
Join-in on the fun!
Ev, W2EV FN03XD
http://go.to/BEACONet
http://go.to/METEORegistry
----------------------------------------------------------------------
Subject: TH-D7A(G) Software Problems
From: BordingK@aol.com
Date: Sat, 4 Nov 2000 10:18:05 EST
X-Message-Number: 7
I asked this over on the HT SIG, but got no breakthrough answers.
I have an unmodified TH-D7A. The Kenwood Software and my cable work great to
program that radio.
A new ham friend KG4JRP jus got a new TH-D7A(G) so we downloaded that version
of the Kenwood programing software - MD7G100.EXE to use to load his new radio.
His radio with my cable works fine on WinAPRS. Communicates both ways.
His radio and his laptop and my same radio will not communicate with his
radio to load memory channels. It gives an error message something like.
Radio Invalid.
So his laptop comm port and cable works with WinAPRS, but not programing
software. I don't see a way to change baud rates or anything like that in
the software. We tried Windows Terminal with his radio and we can do regular
packet things and communicate thru the serial port to the radio.
But the G Model software doesn't seem to want to talk to his radio.
Any suggestions?
Thanks in advance.
DE W5KNB
Ken
----------------------------------------------------------------------
Subject: RE: FINDU Status/comment
From: Gerry Creager N5JXS <gerry@cs.tamu.edu>
Date: Sat, 04 Nov 2000 09:19:31 -0600
X-Message-Number: 8
Steve Sampson wrote:
>
> Completely undocumented.
>
> ----- Original Message -----
>
> > Already there. Try:
> > http://www.findu.com/cgi-bin/rawposit.cgi?call=k9sa-9&start=24&length=12
> >
> > Obviously insert your call and the start time and length.
> > Example starts 24 hours ago and runs for 12 hours.
Er, no... Steve documented it on the list some time back. Like a lot of
code-swingers I know, he does more coding than documenting. However,
Read previous mail | Read next mail
| |