OpenBCM V1.13 (Linux)

Packet Radio Mailbox

DB0FHN

[JN59NK Nuernberg]

 Login: GUEST





  
ZL3AI  > APRS     05.11.00 01:09l 203 Lines 6697 Bytes #999 (0) @ WW
BID : 34324_ZL3AI
Read: GUEST
Subj: TAPR Digest, Nov 02, 4/4
Path: DB0MRW<OK0PKL<OK0PPR<OK0PPL<OK0POK<9A0YRB<HA5OB<HA3PG<IK1ZNW<VK2XY<
      VK2TGB<ZL2TZE<ZL2TZE<ZL2WA<ZL2BAU<ZL3VML
Sent: 001103/1039Z @:ZL3VML.#80.NZL.OC #:46112 [Chch-NZ] FBB7.00g25 $:34324_ZL3
From: ZL3AI@ZL3VML.#80.NZL.OC
To  : APRS@WW


> APRSDOS, wouldn't he have to release the source code?   (Not
> that that would be a bad thing.  <grin>    Even though, IMHO,
> everybody playing with APRS should have registered APRSdos.)

But the TSR lives "outside" the product as a separate executable.
Interfacing to it has to use own propriatary code, although taking the
examples from the DIGI_NED code isn't realy using GPL but more like usign
the borland library.

The TSR is still copyrighted with the General Public License, to if Bob uses
it with his program he has to provide some means to get the source of the
TSR. That can be a link to http://www.qsl.net/digi_ned or to some other
place where the source is stored.

By the way, people asked me where to get it; download the digi_ned source.
When you unpackage it you will find a directory called ax25_mac. All the
code you need, is in this directory. Just take this directory with contents
and throw all the rest away. Oh, remove yaminit.exe and yam12v11.mcs. That
are file for the YAM modem I used for testing and should not be there. I'll
cleanup the directory next time I release a version...

When making a TSR interface like this, other people can connect other TSRs
to do other funny things.

Kind regards,

Henk.






----------------------------------------------------------------------

Subject: aprs.net weirdness
From: Stan Horzepa <stanzepa@mail2.nai.net>
Date: Thu, 02 Nov 2000 20:05:07 +0000
X-Message-Number: 14

Steve Dimse, K4HG, asked me to forward this to the APRSSIG:

There is a strange thing occurring on the aprs network. For some reason,
first.aprs.net and second.aprs.net cannot see each other. I can see both
from my home, and I suspect this is the norm, but apparently there is a
bad router on the path between the two.

The result of all of this is that traffic forwarded to one does not
appear on the other, essentially splitting the aprs network in half.
Hopefully this situtation will be resolved soon, until the router gets
fixed there is nothing I can do about it.

Any comments or questions should be forwarded directly to me, I am not
subscribed to the SIG because of the anti-SPAM situation.

Steve K4HG
k4hg@tapr.org



----------------------------------------------------------------------

Subject: Re: solar/battery power for digis
From: "Kriss Alan Kliegle" <kliegle@nh.ultranet.com>
Date: Thu, 2 Nov 2000 19:53:13
X-Message-Number: 15

I used to run a solar powered WX digi here in SE New Hampshire. Equipment 
was the following:

25 aH Gell Cell
22 Watt Solar Panel
HTX-202 2M HT
KPC-3
Peet Bros. U-2000
1 8A Solar Controler (Battery chager)

System worked fine atop a 250' hill on the seacoast. Could hear for 40+ 
miles, and only put out 5 Watts or 1.5W selectable.
During times of known extended cloudiness, I turned the RELAY or WIDE off 
to reduce amount of TXing. Still, WX was sent every 15 Minutes.

Only reason why site is down is our local repeater was moved there and it 
to is solar powered. (The wind genny is in the shop getting painted before 
being installed!)KA1GJU-3 will be back when I get finished installing the 
repeater hardware.

Solar panels were purchased from Solarelectric.com in San Diego. I 
purchased flexible panels that will take hail, vandels rocks, bullets, 
etc!
The gellcell I got from a local fire alarm company, they remove and replace 
batteries even when they're still good! It costs them money to dispose, so 
I get em free!!
73 de Kriss

PS KPC and HTX-202 draw very little when just RXing, and solar panels do 
put out on cloudy days, but not at rated output obviously! My new 
system,160Watts of panels(10amps+ in full sun) produces just over 1 amp on
cloudy days! The repeater only consumes 90 mA during idle! It helps to 
chose your gear wisely. Look at the specs before you buy.
 

----------------------------------------------------------------------

Subject: Re: aprs.net weirdness
From: Dave Kaplan <dkaplan@steffeninc.com>
Date: Thu, 02 Nov 2000 19:55:05 -0600
X-Message-Number: 16

At 02:05 PM 11/2/00, Stan Horzepa wrote:
>Steve Dimse, K4HG, asked me to forward this to the APRSSIG:
>
>There is a strange thing occurring on the aprs network. For some reason,
>first.aprs.net and second.aprs.net cannot see each other. I can see both
>from my home, and I suspect this is the norm, but apparently there is a
>bad router on the path between the two.



Interestingly enough, I have been unable to connect to first.aprs.net for 
weeks, but can connect to second.aprs.net just fine.


----------------------------------------------------------------------

Subject: Re: APRS Survey 2000 Now Available
From: "Richard Amirault" <ramirault@erols.com>
Date: Thu, 2 Nov 2000 21:43:29 -0500
X-Message-Number: 17

I think question #19 needs to be modified to include "N/A" as an answer.
Not everyone uses a "client" .. and you can't leave this question
unanswered.

Richard Amirault                       N1JDU              Boston, MA, USA
ramirault@erols.com         "Go Fly A Kite"
http:// www.erols.com/ramirault
----- Original Message -----
From: "Richard Parry" <rparry@qualcomm.com>
Subject: [aprssig] APRS Survey 2000 Now Available


> APRS Survey 2000 Now Open
> APRS Survey 2000 http://w9if.net/cgi-bin/aprssurvey/main.pl
>
> Getting a large number of respondents will aid in providing an accurate
> cross-section of the APRS community. So thanks in advance to those that
> complete the survey and spreading the word.
>
> Rich Parry, W9IF



----------------------------------------------------------------------

Subject: Re: WinAprs and Precission Mapping 3.0 Special Edition...Help!!
From: "Dick Stanich" <dstanic@c2i2.com>
Date: Thu, 2 Nov 2000 21:33:7
X-Message-Number: 18

Winaprs is looking for the OCX files under c:\windows\system
as it would in Win95/Win98. Win2000 and ME are different. WINDOWS\SYSTEM
doesn't exsist on later versions of Windows.

FIX:

C:\windows\system

1. Create those directories and run Pmap_oxc.zip again. Or, you need to 
manually install MAPOCX.OCX, OC30.DLL and REGSVR32.EXE in the system 
directory, which are in the zipped file.

2. Create a directory structure as:

C:\Pmap30 with sub directories DATA1,DATA2,DATA3, and STATES.
Example:
C:\Pmap30\data1
c:\Pmap30\data2
c:\Pmap30\data3
c:\Pmap30\states

3. Copy only the files from the CD, in those directories to your hard 
drive.

4. Under options (to the right of your screen), when you open New Map Pres 
Mapping in Winaprs, make sure you select drice 'C'. That's where Winaprs 
will look for C:\Pmap30 (and the sub-directories). Otherwise it will look 
for the CD on drive D.

Dick, KB7ZVA
Southwest Arizona APRS Group



---

END OF DIGEST



Read previous mail | Read next mail


 17.11.2026 04:20:09lGo back Go up