OpenBCM V1.13 (Linux)

Packet Radio Mailbox

DB0FHN

[JN59NK Nuernberg]

 Login: GUEST





  
ZL3AI  > APRS     04.11.00 21:16l 181 Lines 6755 Bytes #999 (0) @ WW
BID : 34321_ZL3AI
Read: GUEST
Subj: TAPR Digest, Nov 02, 3/4
Path: DB0MRW<OK0PKL<OK0PPR<OK0PRG<OK0PAB<HA5OB<HA3PG<VE1DRG<IK1ZNW<GB7CRV<
      GB7FUR<GB7FYL<GB7BOB<GB7OAR<GB7PMB<GB7BAY<ZL2TZE<ZL2TZE<ZL2WA<ZL2BAU<
      ZL3VML
Sent: 001103/1058Z @:ZL3VML.#80.NZL.OC #:46113 [Chch-NZ] FBB7.00g25 $:34321_ZL3
From: ZL3AI@ZL3VML.#80.NZL.OC
To  : APRS@WW


> placed in service yet. I'm trying to get all these figures from memory.
> Gerry, if I've made errors, please correct them!

6 orbital planes, at 60deg spacing, each containing a nominal 4
satellites.  Each plane is inclined in an antegrade, 55 deg inclination
orbit.  Mean altitude is 10,900 miles (17,440 km) (more'r'less) and thus
present a mean motion of 2 (rev/day).

4 or more satellites should be in view to any observer below 79 deg
(N/S) [NOTE: this one's done by memory] 95% of the time.
--
Gerry Creager -- gerry@cs.tamu.edu
Network Engineering			|Research focusing on
Academy for Advanced Telecommunications |Satellite Geodesy and 
and Learning Technologies		|Geodetic Control
Texas A&M University	979.458.4020  (Phone) -- 979.847.8578  (Fax)

----------------------------------------------------------------------

Subject: Re: UK mapping
From: Bob Bruninga <bruninga@usna.edu>
Date: Thu, 2 Nov 2000 09:43:12 -0500 (EST)
X-Message-Number: 8

On 1 Nov 2000, Wes Johnston wrote:

> my GPS, and he loves it. Our question is what commercial or free mapping
> products / maps are available for the UK? He lives in Kent and is not a ham.
> He's insterested in a moving map type product for his car and laptop.

APRSdos has a complete set of maps for the UK.   Nothing that matches the
typical CD ROM quality matps that everyone expects these days, but they do
provide most of the main roads...   donwload the latest
version of UKmaps??.zip from the tapr site in the dosstuff/APRSdos
directory. 








----------------------------------------------------------------------

Subject: Re: solar/battery power for digis
From: Bob Bruninga <bruninga@usna.edu>
Date: Thu, 2 Nov 2000 09:50:25 -0500 (EST)
X-Message-Number: 9

On Wed, 1 Nov 2000, lloyd mitchell wrote:

> Anyone using solar/batteries to power a digi?
> I have a need to power a digi w/o use of wired shore power.

Easy.  Measure the average Current of the Receiver and TNC.  Next meaure
the peak transmitter current.  But multiply it by the on/off cduty cycle.
(usually less than 1% for a home station or could be as high as 20% for a
WIDE digi).  Add them together and that is your average current demand.

Next, you only get about 6 hours average sun a day to charge for 18 hours
of use.  So multiply the the average current by 4 for the Solar array
current required. 

Next figure the average current times 5 days of bad weather for the
battery capacity required.  
Good luck.  It takes a LOT depending on your local weather.

Bob



----------------------------------------------------------------------

[commercial content deleted]

----------------------------------------------------------------------

Subject: Re: solar/battery power for digis
From: Robert Stessel <stessel@maine.edu>
Date: Thu, 02 Nov 2000 18:18:19 +0000
X-Message-Number: 11


>
>
>Next, you only get about 6 hours average sun a day to charge for 18 hours
>of use.  So multiply the the average current by 4 for the Solar array
>current required.
>
>Next figure the average current times 5 days of bad weather for the
>battery capacity required.
>Good luck.  It takes a LOT depending on your local weather.
>
>Bob

Yup, here in Maine, we figure 2.5 hours average signifigant sunlight a day 
during dec-march,
and figure we may go 10 days at a stretch without signifigant sunlight!

On the other hand, I still see some charge out of a solar panel even on 
cloudy days.
haven't measured it yet to see how much we actually get, but there is some 
there.


Robert Stessel - Physical Oceanography Group
University of Maine - 202 Libby Hall - Orono, ME 04469-5741
Tel: 207-581- ...4393(me) ...4388(fax) 


----------------------------------------------------------------------

Subject: Re: solar/battery power for digis
From: "Robert Donnell" <kd7nm@pugetsound.net>
Date: Thu, 2 Nov 2000 10:49:11 -0800
X-Message-Number: 12

>> Anyone using solar/batteries to power a digi?
>> I have a need to power a digi w/o use of wired shore power.

>Easy.  Measure the average Current of the Receiver and TNC.  Next meaure
>the peak transmitter current.  But multiply it by the on/off duty cycle.
>(usually less than 1% for a home station or could be as high as 20% for a
>WIDE digi).  Add them together and that is your average current demand.

I'd strongly suggest looking at 70's (or even late 60's) commercial
handy-talkies.  Since the digi will run most of the time in receive,
choosing a radio with low receive current is very important in reducing your
overall current consumption.
Motorola HT200 and HT220 radios consume less than 5 mA of receive squelched
current.  If you tap into the radio's audio at the volume control, open the
squelch, and disconnect the audio PA, the current consumption will probably
only change 1 or 2 mA.  Even if you choose not to modify the radio
extensively, the worst-case receive current drain (squelch open, audio all
the way up) is about 90 mA, which is in the range of many of the amateur
handheld radios with the squelch closed and battery saver off.  If you
choose a current amateur handheld, remember that you must operate it with
the battery saver disabled.  Similarly, the transmitters are usually more
efficient, with a two-watt transmitter typically consuming 350 to 400 mA.
Most of the amateur gear is approaching 1000 mA to produce the same power.
There are other radios that were built with similar goals, but the names
escape me right now.  The big point here is that by using a radio designed
in the era when a handheld was expected to be used and work for an entire
work shift of your typical beat cop and NOT consume the whole battery pack
(250 to 500 mAH) in the digi will either save you a lot of size and weight
on the battery, or make a big battery you currently have work longer.  It
won't be synthesized, but we don't expect to change APRS frequencies any
time soon, do we?
It also wouldn't surprise me to see a version of digi firmware for the KISS
TNC project in the current QST - and that'll push the power consumption of
the TNC down some more.

>
>Next, you only get about 6 hours average sun a day to charge for 18 hours
>of use.  So multiply the the average current by 4 for the Solar array
>current required.
>
>Next figure the average current times 5 days of bad weather for the
>battery capacity required.

Here in the Puget Sound Basin, I'm not sure if there's such a thing as a big
enough battery  :-)


----------------------------------------------------------------------

Subject: Re: Settings for WinAPRS 2.4.5
From: "Henk de Groot" <henk.de.groot@hetnet.nl>
Date: Thu, 2 Nov 2000 23:35:48 +0100
X-Message-Number: 13

Hello Bill,

> But...   GPL doesn't mean free.  If Bob put actual GPL code in



Read previous mail | Read next mail


 17.11.2026 04:44:20lGo back Go up