|
ZL3AI > APRDIG 19.05.04 09:18l 113 Lines 3471 Bytes #999 (0) @ WW
BID : 3296-ZL3AI
Read: GUEST
Subj: TAPR Digest, May 05, 2/2
Path: DB0FHN<DB0FOR<DB0SIF<DB0EA<DB0RES<ON0BEL<7M3TJZ<ZL2TZE<ZL3VML
Sent: 040519/0621Z @:ZL3VML.#80.NZL.OC #:24338 [Chch-NZ] FBB7.00i $:3296-ZL3AI
From: ZL3AI@ZL3VML.#80.NZL.OC
To : APRDIG@WW
Subject: 9600 sound card packet
From: Wes Johnston <wes@johnston.net>
Date: Wed, 05 May 2004 20:01:28 -0400
X-Message-Number: 12
Anyone run 9600 via a transformer coupled sound card interface? Just me
thinking , but wouldn't simple optoisolators work too? I mean, if we had
an opamp setup as a limiter which would allow us to snap back and forth
from 0 to 1, and have the correct deviation, would all be well? Or would
this "snap" cause splatter? Do the audio transformers have a good enough
low frequency response to do 9600?
Wes
----------------------------------------------------------------------
Subject: RE: agwpe
From: "Gerhard F5VAG" <f5vag@nerim.net>
Date: Thu, 6 May 2004 02:23:21 +0200
X-Message-Number: 13
>-----Original Message-----
>From: bounce-aprssig-36145@lists.tapr.org
>[mailto:bounce-aprssig-36145@lists.tapr.org]On Behalf Of Wes Johnston
>Sent: Thursday, May 06, 2004 1:42 AM
>To: TAPR APRS Special Interest Group
>Subject: [aprssig] Re: agwpe
May be you should ask the question(s) in the SV2AGW group:
http://groups.yahoo.com/group/SV2AGW/ . There is a lot of answers in the
message archive.
Did you try a RTS-CTS bridge on the PC side of the RS-232 connection?
--
73 de Gerhard, F5VAG / DL7MW
APRSFR: http://france.aprs2.net
----------------------------------------------------------------------
Subject: PSK 31 APRS Gate
From: "Andrew Rich" <vk4tec@hotmail.com>
Date: Thu, 06 May 2004 10:39:42 +1000
X-Message-Number: 14
Does anyone know of a PSK 31 APRS Gate ?
----------------------------------------------------------------------
Subject: Packet Status Register on-line
From: Stan Horzepa <stanzepa@earthlink.net>
Date: Wed, 05 May 2004 21:31:49 -0400
X-Message-Number: 15
The Spring 2004 issue of Packet Status Register (PSR), TAPR's quarterly
newsletter is now on-line at www.tapr.org.
Enjoy!
Stan Horzepa, WA1LOU
Packet Status Register Editor
----------------------------------------------------------------------
Subject: Anyone playing with Cybiko APRS?
From: "Jason Rausch" <ke4nyv@hamhud.net>
Date: Wed, 5 May 2004 21:30:33
X-Message-Number: 16
I bought 2 classic cybikos off ebay for about $20. I have only had them
for about 4 or 5 hours and I already have one talking to a KISS TNC and the
UI Gate up and running. I was really surprised at the range. I am on the
ground floor of a 3 floor apartment. I walked up to my truck (actually
level with the second floor) and I was able to send packets to the gate and
see them pop up on my HamHUD II.
I was wondering if anyone was playing with this to maybe planning on
setting up a UI Gate at Dayton.
Jason KE4NYV
www.ke4nyv.com
RPC Electronics
www.ke4nyv.com/rpc
----------------------------------------------------------------------
Subject: Re: Anyone playing with Cybiko APRS?
From: Sean Jewett <sean@rimboy.com>
Date: Wed, 5 May 2004 20:41:25 -0500 (CDT)
X-Message-Number: 17
I picked up one several months ago knowing there were some APRS apps for
it. I was just telling Bruce KQ4TV the other day that I needed to sit
down and get that all running with my PK-12 and Icom u2AT (micro 2AT)
radio. If I make it up to Dayton (big if) then I'll see about getting it
running.
Sean...
--
The punk rock will get you if the government don't get you first.
--Old 97's
_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
KG4NRC http://www.rimboy.com
---
END OF DIGEST
Read previous mail | Read next mail
| |