| |
ZL3AI > APRS 03.11.00 23:17l 189 Lines 7271 Bytes #999 (0) @ WW
BID : 34263_ZL3AI
Read: GUEST
Subj: TAPR Digest, Oct 31, 4/10
Path: DB0MRW<DB0ERF<DB0FBB<DB0GOS<DB0HAG<DB0ACH<ON0RAT<ON5VL<LX0HST<HA3PG<
SV1AAW<IK6PYS<IK1ZNW<HB9OK<EA3PB<EA5DVS<EA3RKU<ED3ZAG<ED3ZAF<EA3B<
EA3D<F5KAT<F5KPO<F6KED<F5KBJ<F5IX<ZL2TZE<ZL2TZE<ZL2WA<ZL2BAU<ZL3VML
Sent: 001101/1033Z @:ZL3VML.#80.NZL.OC #:45765 [Chch-NZ] FBB7.00g25 $:34263_ZL3
From: ZL3AI@ZL3VML.#80.NZL.OC
To : APRS@WW
And if your version of APRS is not setting these properly then please
contact the author and have him fix it... We must get these fundamental
implementation problems fixed. Thanks
Bob
----------------------------------------------------------------------
Subject: Re: GPS out of the US
From: "Jim King" <jim@jimking.net>
Date: Tue, 31 Oct 2000 08:26:14 -0600
X-Message-Number: 17
> > On the Garmin models, many of them are programmed to freeze up above 110
> > mph. So on airplanes, if I get a fix on my Garmin 40, it shows me the
fix
> > and then locks up. This is a "feature" of the Garmin so that they can
sell
> > more expensive models to their aviation users.
> >
>
> My Garmin III+ works fine on commercial airlines. I've been at 30,000 ft.
> doing 500+ MPH and it shows very accurately my heading, altitude, speed,
> etc. I this just a problem with some of Garmin's lower models?
The 99 knot speed limit is only on the older Garmin units. All the
12-channel units (12XL, III+, 48, Steet Pilot, etc.) work up to 999 knots.
I've used my 12XL and III+ on commercial airplanes and they worked fine -
showed ground speeds up to about 550 MPH.
Jim
----------------------------------------------------------------------
Subject: Re: Settings for WinAPRS 2.4.5
From: "Dennis Hudson, N2LBT" <n2lbt@n2lbt.com>
Date: Tue, 31 Oct 2000 09:47:06 -0500
X-Message-Number: 18
If I read your message right, micahsonger is not running a TNC or a radio.
Probably the problem lies in the proximity and mode of the IGate to the
stations that micahsonger is trying to contact. If you know the location and
operator of the local IGate you should contact them and ask if the IGate is
2 way, and if you need permission to access it.
Relying on an IGate to do your RF packet chores can be difficult. I can
understand some of the problems in setting up a radio-tnc in some
situations. I live in a apartment, where it is difficult to set up such a
station. I have set up a IGate at my office which is a few miles away. It is
still not the ideal setup, as I cannot control things such as paths and
power remotely. If the IGate was not close enough to monitor it, as mine is,
then you could even be guessing if you local packets were even getting
transmitted. You can probably see how this can get frustrating. If you do
decide to go the IGate route, don't expect plug and play reliability 100% of
the time.
There are other options, such as remote ax.25 stations over TCP/IP. This is
possible under linux, and other programs like AGWPE for windows. These would
really be more ideal than an Igate if you cannot setup an RF station at
home.
Dennis, N2LBT
>> I have a registered version of WinAPRS 2.4.5. I have only the Internet
>> running at this time, no vhf,hf,ect.... What setting do I need turned
>> on/off to send and receive traffic from other stations local. Local
>> meaning 30-100 miles away. There are no nodes in my town all of them are
>> about 30-40 miles from here. When I see station on the map I click on them
>> and send a MSG to them but they don't get it. But when I'm mobile in
>> those's areas I send MSG's to I receive all kinds of activity hundreds of
>> miles away. Thru a I-Gate. Is there something that needs changed on my end?
>> Check your TNC settings.
>The following MUST be correct, or SOMETHING will be broken:
> SCREENLN 0
> PACLEN 0
> MCON OFF
> MCOM OFF
> HEADERLN OFF
>And if your version of APRS is not setting these properly then please
>contact the author and have him fix it... We must get these fundamental
>implementation problems fixed. Thanks
>Bob
----------------------------------------------------------------------
Subject: Re: Settings for WinAPRS 2.4.5
From: "Jeff Brenton" <jeffb@espi.com>
Date: Tue, 31 Oct 2000 08:51:54 -0600
X-Message-Number: 19
> And if your version of APRS is not setting these properly then please
> contact the author and have him fix it
In general, APRS programs DO set the TNC correctly ... IF you tell it the
correct TNC, AND it has a matching XXXXINIT.TNC file.
For modularity, as you know, these files are different for each major type
of TNC. And most programs don't hard-code the TNC setup parameters, to
prevent problems. Selecting the wrong TNC type during setup (or NOT
selecting a TNC type) will result in no initialization file being found, so
the standard settings don't get sent.
So, prior to letting the author of your APRS program know, verify that
you're not suffering from OID (Operator Induced Difficulty), and just
missing the initialization that WAS provided...
Jeff Brenton
President,
Engineered Software Products, Inc
http://espi.com
Questionable web page: http://dididahdahdidit.com
Liberalism grants you the freedom to advocate any idea*.
* Please see http://www.dididahdahdidit.com/except.php for a
current list of exceptions
----------------------------------------------------------------------
Subject: Re: FSRs and Packet
From: "Smith, Tim" <n1btq@ne.mediaone.net>
Date: Tue, 31 Oct 2000 10:42:44 -0500
X-Message-Number: 20
I think the FRS implementation of either proprietary GPS posits or
overlaying APRS on FRS is a very valid and real topic. The fact that Garmin
received a variance show the 'Commission's flexibility and forward thinking
by some of the manufacturers. If corporate america is willing to bet there
is a market for this and willing to throw the bucks at development, do test
marketing, rtc., I think their chances of even limited success is great.
Personally I feel that having an alternate, unlicensed platform to demo
APRS on so that non-hams can dip their feet in the well without "joining the
ham club" first is appealing. I'm not advocating breaking the rules either
but you can't deny that alot of attention hasn't been given to the thought.
Mark...we know how you feel about HT centricity and just becasue it is not
sucessful applicance in your neck of the woods that it will be unsucessful
in others.
I think we're all in agreement as Garmin begins to ship their units I think
it's a great way to bring outsiders into the APRS world.
Tim, N1TI-5
http://www.findu.com/cgi-bin/find.cgi?n1ti-5
-----Original Message-----
From: bounce-aprssig-17998@lists.tapr.org
[mailto:bounce-aprssig-17998@lists.tapr.org]On Behalf Of Mark Fellhauer
Sent: Tuesday, October 31, 2000 2:39 AM
To: TAPR APRS Special Interest Group
Subject: [aprssig] Re: FSRs and Packet
At 10:32 PM 10/30/00, Facility 406 wrote:
>Sounds like a valid experiment to me, though complex and more expensive
>than most, or are we HAMs not into experimentation any more???
But it's not a HAM experiment. It's an FRS experiment and one that the FCC
has deemed to fall outside the scope of the service. I'm not going to
quote the FRS FCC charter, but it clearly states that no digital modes are
allowed and no external antennas or TNC's may be connected to an FRS
radio. Yes, Garmin applied for and got a waiver - but a very limited one.
Or are we hams not into following the rules and heeding the spirit of an
FCC regulation anymore?
Again, I'm even amazed that we're having this discussion. Why are so many
hams SCHEMING to use freqeuncies not set aside for us. If you want to pump
Read previous mail | Read next mail
| |