| |
ZL3AI > APRS 03.11.00 23:13l 222 Lines 6845 Bytes #999 (0) @ WW
BID : 34290_ZL3AI
Read: GUEST
Subj: TAPR Digest, Nov 01, 2/4
Path: DB0MRW<DB0ERF<DB0BRI<DB0HAG<DB0ACH<ON0RAT<ON5VL<LX0PAC<LX0HST<HA3PG<
RZ6HWL<VE3FJB<IK1ZNW<HB9OK<EA3PB<EA5DVS<EA5AKC<EA3RKU<ED3ZAG<ED3ZAF<
EA3B<EA3D<F5KAT<F5KPO<F6KED<F5KBJ<F5IX<ZL2TZE<ZL2TZE<ZL2WA<ZL2BAU<
ZL3VML
Sent: 001102/1122Z @:ZL3VML.#80.NZL.OC #:45990 [Chch-NZ] FBB7.00g25 $:34290_ZL3
From: ZL3AI@ZL3VML.#80.NZL.OC
To : APRS@WW
putting these in the hands of every FRS owner? Why not just put =
microphones=20
on the Int Space Station to listen for every CRY WOLF muttered on the=20
planet?????=20
I'm USCG and deal with DGPS and other issues daily. This kind of =
thinking=20
makes Hams look like fools... Engage brain before mouth... Let's =
STOP=20
inventing fixes for stuff that ISN'T BROKEN...=20
[html deleted]
----------------------------------------------------------------------
Subject: Re: FSRs and Packet
From: Robert Stessel <stessel@maine.edu>
Date: Wed, 01 Nov 2000 13:16:06 +0000
X-Message-Number: 6
At 05:28 11/01/2000 -0600, Steve Sampson wrote:
>You're taking the suggestion too seriously, and your soap box
>is way too high.
Yes, let's lighten up and drop the adrenalin about 10db.
Lots of good ideas (such as APRS maybe?) come from "thinking outside the box."
Even ideas that are not practical for one reason (tech? legal? cost?) can
lead someone else to think of a workable one.
One of the great things about ham radio is that we can not fail.
A company that sinks time & money into a dead end project has lost money.
A ham that sinks time & money into a dead end project has had fun
experimenting.
----------------------------------------------------------------------
Subject: Re: FSRs and Packet
From: Earl Needham <KD5XB@AMSAT.ORG>
Date: Wed, 01 Nov 2000 06:47:03 -0700
X-Message-Number: 7
At 02:30 AM 11/1/00 -0600, Mark Fellhauer blasted the following out into
the ether:
>At 11:00 PM 10/31/00, Earl Needham wrote:
>> Well, speaking strictly for 220 MHz -- because it isn't a ham
>> frequency any more? <G>
>Well if you're going to get technical... I'm aware that in 1991 220-222
>Mhz was reallocated, but that still leaves us with about 3 mhz
>in the 1.25 (or 1.35 - whichever you prefer) Meter band. Ten-Tec and
>other manufactures who still sell amateur equipment for this band refer to
>them as 220 rigs and not 222-to-225 rigs. You might want to email them a
>correction too. While you're at it, why not correct the 220 Mhz Amateur
>Radio Society. :)
Too bad we can't "correct" the FCC...(<G) again)
Earl
Earl Needham, KD5XB mailto:KD5XB@AMSAT.ORG
Clovis, New Mexico DM84jk N34d 25.446m W103d 12.700m (or so)
Pet peeve: breath is a noun, breathe is a verb (When you take a breath,
you breathe...)
----------------------------------------------------------------------
Subject: Re: FSRs and Packet
From: "Mike Yetsko" <myetsko@insydesw.com>
Date: Wed, 1 Nov 2000 08:59:37 -0500
X-Message-Number: 8
Actually, our 'loss' of 220-222 was a gain. Originally
we were 'secondary service' or something like that from
220-225. Now we are 'primary' from 222-225, and I
think we have secondary from 216-220 or something
like that. We got the 'other' frequencies that UPS tried
to grab when they wanted all of 220.
Mike
----------------------------------------------------------------------
Subject: Want Ad - TNC wanted
From: "Keith Kotch" <kotch@mpinet.net>
Date: Wed, 1 Nov 2000 09:51:46 -0500
X-Message-Number: 9
Hi all,
Am trying to help facilitate getting a friend back into digital and APRS.
He's got a brand new mobile 2m, Yaesu FT-2600M that he just won at a
hamvention or a Yaesu VX-1R VHF/UHF ultra-compact HT and Mirage BD-35 amp.
He's in need of a TNC and would like a KPC 3+ ver 8.3 and is willing to
trade either radio for the tnc if anyone is interested.
When I originally talked to him about the deal, he didn't mention the Mirage
brick but listed it with the equipment. The radio's are surplus to him
right now thus the trade offer. Heck, if no one bites on this then maybe
I'll buy a tnc and trade him!
If anyone is interested, either contact him, Mike Welch, KF4HFC, at
kf4hfc@juno.com or contact me at kf4bxt@arrl.net
Keith
Keith Kotch
Ambient Design Consultants 407-673-1901
I'm a Ham too, Amateur Radio Call: KF4BXT
----------------------------------------------------------------------
Subject: UK mapping
From: Wes Johnston <kd4rdb@usa.net>
Date: 1 Nov 00 12:42:45 EST
X-Message-Number: 10
One of my co-workers has come here to the USA from the UK. I just showed =
him
my GPS, and he loves it. Our question is what commercial or free mapping
products / maps are available for the UK? He lives in Kent and is not a h=
am.
He's insterested in a moving map type product for his car and laptop.
I don't want this to turn into a holy war about which is best... just
something he can run on a laptop.
Thanks!
Wes
____________________________________________________________________
Get free email and a permanent address at http://www.netaddress.com/?N=3D=
1
----------------------------------------------------------------------
Subject: Re: UK mapping
From: Craig Patterson <kc0cgf@yahoo.com>
Date: Wed, 1 Nov 2000 10:15:25 -0800 (PST)
X-Message-Number: 11
http://www.gpss.co.uk/
--- Wes Johnston <kd4rdb@usa.net> wrote:
>
> One of my co-workers has come here to the USA from
> the UK. I just showed him
> my GPS, and he loves it. Our question is what
> commercial or free mapping
> products / maps are available for the UK? He lives
> in Kent and is not a ham.
> He's insterested in a moving map type product for
> his car and laptop.
>
> I don't want this to turn into a holy war about
> which is best... just
> something he can run on a laptop.
>
> Thanks!
> Wes
>
>
>
____________________________________________________________________
> Get free email and a permanent address at
> http://www.netaddress.com/?N=1
>
> ---
> You are currently subscribed to aprssig as:
> kc0cgf@yahoo.com
> To unsubscribe send a blank email to
> leave-aprssig-18700I@lists.tapr.org
> Questions regarding the SIG go to the SIG
> administrator: wa1lou@tapr.org
>
__________________________________________________
Do You Yahoo!?
>From homework help to love advice, Yahoo! Experts has your answer.
http://experts.yahoo.com/
----------------------------------------------------------------------
Subject: Re: Settings for WinAPRS 2.4.5
From: "Henk de Groot" <henk.de.groot@hetnet.nl>
Date: Wed, 1 Nov 2000 18:01:21 +0100
X-Message-Number: 12
> >I know it has disadvantages, like losing digipeating, etc. But it's
> >still a great option to have...
>
> You don't have to lose digipeating if you use KISS. All you need to do
> is to put the digi code in the application.
Even better, you can make it work right while at it, like adding intelligent
digipeating... But making a simple relay is very easy and does not need to
consume much code.
I already offered, and do it again now, to use the AX25_MAC layer driver
from DIGI_NED. This is an independent TSR that not only adds KISS but also
BayCom, YAM and SCC based solutions and more and 8 channels. The interface
Read previous mail | Read next mail
| |