| |
ZL3AI > APRDIG 31.03.04 13:29l 123 Lines 3345 Bytes #999 (0) @ WW
BID : 3067-ZL3AI
Read: GUEST
Subj: TAPR Digest, Mar 28, 1/1
Path: DB0FHN<DB0FOR<DB0SIF<DB0NHM<DB0ERF<DB0FBB<DB0GOS<ON0AR<ON0AR<7M3TJZ<
F6KMO<ON0BEL<ZL2BAU<ZL2BAU<ZL3VML
Sent: 040331/1022Z @:ZL3VML.#80.NZL.OC #:21695 [Chch-NZ] FBB7.00i $:3067-ZL3AI
From: ZL3AI@ZL3VML.#80.NZL.OC
To : APRDIG@WW
TAPR APRS Special Interest Group Digest for Sunday, March 28, 2004.
1. Re: Filter port
2. Re: Filter port
3. Re: Filter port
4. low cost
5. Satcom Gates
6. RE: Satcom Gates
----------------------------------------------------------------------
Subject: Re: Filter port
From: "Dick Stanich" <dick@kb7zva.com>
Date: Sat, 27 Mar 2004 23:24:9
X-Message-Number: 1
>I have never used a Filtered Port 14580 with WinAPRS. I can not find the
>proceedure so I am asking for help, please.
>
>My first attempt to connect then send a message to SERVER with
>r/42/113/200 didn't seem to work..
>
>Thanks in advance,
>
>Robbie
Are you connecting to a server that supports filtered ports? Send a message
to 'SERVER' and the text of the message 'filter r/42/-88/200'. Without the
quotes <g>. You must also have a verified logon.
Dick, KB7ZVA
APRSWest
----------------------------------------------------------------------
Subject: Re: Filter port
From: Robbie - WA9INF <mwrobertson@comcast.net>
Date: Sun, 28 Mar 2004 05:18:08 -0600
X-Message-Number: 2
Thanks Dick and all,
I was using a negative in my actual message, just a typo in the post.. I
tried another version, 272. of Waprs and it worked right the first time,
:-( then went back to Waprs251, and then it worked! I luv computers!!!
Thanks to all that responded...
Robbie
----------------------------------------------------------------------
Subject: Re: Filter port
From: "AE5PL Lists" <HamLists@ametx.com>
Date: Sun, 28 Mar 2004 07:33:16 -0600
X-Message-Number: 3
I know Robbie got his question answered, but for those looking for a
description on how to set up a server filter port, the following URL's
might help:
http://www.aprs-is.net/javAPRSSrvr/serveradjunct.htm
http://www.aprs-is.net/javAPRSSrvr/javaprsfilter.htm
Robbie, I am curious as to why you went back to 2.51? If I am not
mistaken, 2.51 does Mic-E conversion which is not desirable on APRS-IS.
I know there are other fixes in 2.72 as well. Also, does 2.72 have
built-in server filter support (many clients do) so you don't have to
send a message?
73,
Pete Loveall AE5PL
pete@ae5pl.net
----------------------------------------------------------------------
Subject: low cost
From: "Darrell Sutton" <dsutton@cox.net>
Date: Sun, 28 Mar 2004 20:07:40 -0500
X-Message-Number: 4
Tried getting the digest archives but wont come up Looking for the lowcost
GPS units that have been listed here before I think they were around 80$ no
displays.
73
----------------------------------------------------------------------
Subject: Satcom Gates
From: "Christensen, Eric" <CHRISTENSENE@MAIL.ECU.EDU>
Date: Sun, 28 Mar 2004 21:30:44 -0500
X-Message-Number: 5
Just as a brief poll...
Send me an email OFF THE LIST if you are running a Satcom Gateway for an
APRS satellite. Please tell me the callsign of the S-Gate, the location,
and the satellite(s) you are monitoring for.
Thanks,
Eric KF4OTN
----------------------------------------------------------------------
Subject: RE: Satcom Gates
From: "Christensen, Eric" <CHRISTENSENE@MAIL.ECU.EDU>
Date: Sun, 28 Mar 2004 23:23:57 -0500
X-Message-Number: 6
Let me clarify something... How about give me your City, State (Providence)
and maybe your Grid instead of your LAT and LONG...
Thanks.
---
END OF DIGEST
Read previous mail | Read next mail
| |
