| |
ZL3AI > APRS 23.09.00 18:42l 222 Lines 7868 Bytes #999 (0) @ WW
BID : 33541_ZL3AI
Read: GUEST
Subj: TAPR Digest, Sep 21, 6/7
Path: DB0MRW<OK0PKL<OK0PPR<OK0PPL<OK0POK<9A0YRB<HI8GN<PP5BLU<PY3KW<ZL2TZE<
ZL2TZE<ZL2WA<ZL2BAU<ZL3VML
Sent: 000922/1127Z @:ZL3VML.#80.NZL.OC #:40865 [Chch-NZ] FBB7.00g25 $:33541_ZL3
From: ZL3AI@ZL3VML.#80.NZL.OC
To : APRS@WW
Haven't had a problem with the replacement crystals.
....DOUG
kd4moj
Where am I????? ----------->>>> http://map.findu.com/kd4moj
http://www.tallahassee-scanner.com Scanning Tallahassee Florida
+-----------------------------------------------------------------------+
| Doug Ferrell (850) 575-7119 |
| kd4moj@kd4moj.org, http://www.kd4moj.org Fax (850) 575-6577 |
| Amateur Radio & Television (ATV), APRS APRS 144.390 Mhz |
_| 3027.27N / 08420.80W Tallahassee Florida 131.8 CTCSS 444.400 Mhz |_
----------------------------------------------------------------------
Subject: Re: MFJ Data Radio [Was: Fwd: MC Amateur Club Talk]
From: Mark Fellhauer <sparkfel@primenet.com>
Date: Thu, 21 Sep 2000 19:39:20 -0500
X-Message-Number: 36
Most radios have some form of keylock on them, including the DJ-190. My
other packet HT, an ADI AT-200, has a similar function. As do most
mobiles. Setting functions on the Alinco is not intuitive (or even
labeled), so it's unlikely that a third party could change the frequency
with that feature enabled.
I like the ADI because you can remove the battery and put in a floor-plate
(from Standard), which makes for a pretty install (no ugly battery
terminals hanging out). It also makes for a very compact transceiver. My
only complaint about the ADI is that it uses the dreaded center negative
coaxial power connector (of Bob Bruninga fire fame). I also like the ADI
because it LOOKS like it was made in Russia or China in the 1960's (It
reminds me of a Tokarev CZ52). :)
On my FT-8500 you can set the keylock and remove the microphone; at that
point you can not change any settings, other than turn the unit on or off
with the multifunction selector knob. Perfect for when you don't want
people messing with the settings.
I dunno if getting knocked off frequency is a disadvantage (more of an
annoyance). I would consider being stuck with a rockbound rig that can't
even be used for voice mode as a bigger disadvantage.
73,
Mark
KC7BXS
At 07:01 PM 9/21/00, Richard Amirault wrote:
>Another advantage ... you can't accidentally knock it off frequency (been
>there, done that with my HT....but the HT is still a better choice, IMHO)
----------------------------------------------------------------------
Subject: Re: DJ-190HT
From: Mark Fellhauer <sparkfel@primenet.com>
Date: Thu, 21 Sep 2000 19:50:39 -0500
X-Message-Number: 37
Like I said, find an old 200 series Kenwood mobile for packet use. They're
dinky, you can crank them down to 5 watts, and they have excellent receive
characteristics. Plus you can find them at hamfests for cheap. Usually
cheaper than a comparable ICOM or Yaesu rig.
For people getting into APRS for the first time, I would resist the urge to
buy an HT (or rockbound MFJ data radio) dedicated for packet, unless you
have a specific need for battery (like AA cells) operation. Mobile Rigs
just seem to be easier to interface, and you can do more with them. And
a used mobile is no more expensive. The only reason I use an HT on the
Sioux Falls I-gate is that it's 100 feet from the Sioux Falls Digi, and I
can set the ADI to TX at a few hundred milliwatts...it keeps the TVI down
and my computer speakers don't thump when the radio keys up.
73,
Mark
KC7BXS
At 06:19 PM 9/21/00, Paul E. Knupke, Jr. wrote:
>For about 10 months my digi used a DJ-190 HT into a Radio Shack 2m amp.
>Wasn't the ideal solution but it worked. Its since been replaced by a
>Kenwood TM-261, with a cavity.
----------------------------------------------------------------------
Subject: Re: MFJ Data Radio
From: Doug Ferrell <kd4moj@kd4moj.org>
Date: Thu, 21 Sep 2000 20:52:17 -0400
X-Message-Number: 38
Ok OK.... so I've taken some MFJ bashin'. I happen to love Mighty Fine
Junk! [GRIN] See you folks @ the DCC!
....DOUG
kd4moj
Where am I????? ----------->>>> http://map.findu.com/kd4moj
http://www.tallahassee-scanner.com Scanning Tallahassee Florida
+-----------------------------------------------------------------------+
| Doug Ferrell (850) 575-7119 |
| kd4moj@kd4moj.org, http://www.kd4moj.org Fax (850) 575-6577 |
| Amateur Radio & Television (ATV), APRS APRS 144.390 Mhz |
_| 3027.27N / 08420.80W Tallahassee Florida 131.8 CTCSS 444.400 Mhz |_
----------------------------------------------------------------------
Subject: DJ190 and other HT's
From: Bill Vodall <wa7nwp@yahoo.com>
Date: Thu, 21 Sep 2000 18:33:03 -0700 (PDT)
X-Message-Number: 39
How well do the HT's work at 9600?
No - I'm not suggesting we use MFJ8621's on 144.39
at 9600 baud.. That's what 145.01 is for...
Another point for the MFJ's is standby current
consumption... In some applications, like solar
powered digi's, it could make a difference. Very
few HT's take less then the MFJ data radio.
I wonder what it would take to kit up the Motorola
Ap note radio (MFJ data radio) dedicated for 144.39.
It might be possible to come up with a real cheap
radio. Just a thought. Hard to compete with new
HT's for $100. Is anybody currently selling them
(DJ190's) for that price now?
Bill - WA7NWP
__________________________________________________
Do You Yahoo!?
Send instant messages & get email alerts with Yahoo! Messenger.
http://im.yahoo.com/
----------------------------------------------------------------------
Subject: Kenwood D-700 and Garmin Streetpilot Colormap question---
From: "C. A. Patrick Voigt" <pvoigt@loclnet.com>
Date: Thu, 21 Sep 2000 22:00:27 -0400
X-Message-Number: 40
Hi all-
A question for everyone: has anyone had success in getting the D-700 to
upload waypoints to a Streetpilot? I have the pair in my vehicle and data
only gets from the GPS to the radio - I don't get any waypoints for heard
stations on the GPS, which the documentation for both units indicates should
work. I'm not sure at this point if the problem is with the radio not
sending the sentences or with the GPS not interpreting & displaying them.
So - has anyone had success with the D700 sending waypoints to any GPS? Or
with getting waypoints from any other device with the Streetpilot?
Thanks in advance-
-Patrick
C. A. Patrick Voigt, KD4GCM
pvoigt@loclnet.com
EMD / Telecommunicator
BCSAR Comm Unit Leader
Burke County Emergency Services
EOC: 828-437-1911
Wireless: 704-579-0659
Home: 704-483-3471
Fax: 704-483-0760
Text messaging:
http://message.alltel.com Pin: 7045790659
----------------------------------------------------------------------
Subject: Re: DJ190 and other HT's
From: Mark Fellhauer <sparkfel@primenet.com>
Date: Thu, 21 Sep 2000 21:23:30 -0500
X-Message-Number: 41
At 08:33 PM 9/21/00, Bill Vodall wrote:
>How well do the HT's work at 9600?
I already pointed that out. But how much 9600 BPS 2 meter packet is out there?
>Another point for the MFJ's is standby current
>consumption... In some applications, like solar
>powered digi's, it could make a difference. Very
>few HT's take less then the MFJ data radio.
I already pointed that out, too. I think the DEAFNESS of the MFJ data
radio offsets any preceived gains. Most of the solar digi's I've seen are
co-located with other radio services, and the high RF saturation in those
areas really prevent one from even considering the MFJ. I've seen solar
powered voice repeaters, it's just a matter of sizing the solar array and
batteries properly. Sure, it adds to the cost. But if you can get a
digi in a super spot (which is why I'd assume you be going solar) than it's
worth the effort to go first class.
If I coulda gotten a donated site on the Menlo Park Water Tower here in
Read previous mail | Read next mail
| |