| |
ZL3AI > APRS 25.10.00 16:17l 182 Lines 6547 Bytes #999 (0) @ WW
BID : 34124_ZL3AI
Read: GUEST
Subj: TAPR Digest, Oct 23, 2/5
Path: DB0MRW<DB0PV<DB0FSG<I4UKI<IK6RUY<I6ZLO<IK6PYS<N8ZFM<ZL2TZE<ZL2TZE<
ZL2WA<ZL2BAU<ZL3VML
Sent: 001024/1058Z @:ZL3VML.#80.NZL.OC #:44740 [Chch-NZ] FBB7.00g25 $:34124_ZL3
From: ZL3AI@ZL3VML.#80.NZL.OC
To : APRS@WW
we need someone who has the time, and trouble to offer to program
EProms for others, THen we will really see some global improvements in
the APRS system... Any takers?
> I have been running UIDIGI on a local hilltop in Southern California
> (N6EX-4) for nearly six months. I believe that UIDIGI is currently the
> best solution for a dedicated APRS digipeater....
> (1) You can use it on any inexpensive TNC-2 clone (PacComm, MFJ, etc.).
> (2) It ... is ... specifically to APRS, so it is easier to configure.
> (3) It supports SSID [directional] routing ...
> (4) ...it implements WIDEn-N routing correctly!
> KPC-3 based WIDEn-N digis. The only potential inconvenience is that it
> is necessary to program the EPROM that is installed in the TNC-2. If you
> don't have this capability or have a friend that does, you would have to
> find someone to do this for you. Once the EPROM is installed, its pretty
> much plug-and-play....
----------------------------------------------------------------------
Subject: Re: Opinions on UIDIGI firmware for TNC2s?
From: Wally Foster <wfoster@hsc.usc.edu>
Date: Mon, 23 Oct 2000 06:28:12 -0700
X-Message-Number: 6
Might have missed this.. Does UIDIGI allow remote access or do you have
to go onsite to change parms ??
----------------------------------------------------------------------
Subject: Re: Opinions on UIDIGI firmware for TNC2s?
From: Dave Kaplan <dkaplan@steffeninc.com>
Date: Mon, 23 Oct 2000 08:42:30 -0500
X-Message-Number: 7
>
> > I have been running UIDIGI on a local hilltop in Southern California
> > (N6EX-4) for nearly six months. I believe that UIDIGI is currently the
> > best solution for a dedicated APRS digipeater....
> > (1) You can use it on any inexpensive TNC-2 clone (PacComm, MFJ, etc.).
> > (2) It ... is ... specifically to APRS, so it is easier to configure.
> > (3) It supports SSID [directional] routing ...
> > (4) ...it implements WIDEn-N routing correctly!
I am running UIDIGI at three locations between Omaha and Sioux Falls. What
a great program!
In addition to all the features listed above, UIDIGI also supports
TRACEn-N, something the KPC does not do. For some reason, here in the
midwest, we have a lot of people running with TRACE as part of their path.
I did have one problem that took me a week to solve. I loaded UIDIGI in a
Tiny2 MK-II and the system would not boot. Turns out that, if memory serves
me, pin 22 SIO MUST go to ground. This pin connects to pin 3 of the
disconnect header. I had to cut the trace between pins 3 and 4 of the
header and run a wire from pin3 to ground to make it work. Marco tell me
that this problem has been corrected in UIDIGI 1.8 beta 3 and will be in
all future releases. However, if you install the current non beta version
(1.7) in a TINY-2 MK-II be advised.
I would also like to add that Marco has started a e-mail reflector for
UIDIGI sysops. I find that he answers questions in 24 hours or less and is
quick to respond to bugs.
Dave
WB0WNX
----------------------------------------------------------------------
Subject: Re: Opinions on UIDIGI firmware for TNC2s?
From: Dave Kaplan <dkaplan@steffeninc.com>
Date: Mon, 23 Oct 2000 08:49:43 -0500
X-Message-Number: 8
There is a remote sysop function the mimics THENET protocol. Remember, the
there is a power reset it will default to the params in the EPROM
You can read the manual at http://space.tin.it/computer/msavegna/doc/INTROE.TXT
Dave
WB0WNX
At 06:28 10/23/2000 -0700, Wally Foster wrote:
>Might have missed this.. Does UIDIGI allow remote access or do you have
>to go onsite to change parms ??
>
>
>---
>You are currently subscribed to aprssig as: dkaplan@steffeninc.com
>To unsubscribe send a blank email to leave-aprssig-18700I@lists.tapr.org
>Questions regarding the SIG go to the SIG administrator: wa1lou@tapr.org
----------------------------------------------------------------------
Subject: Re: Opinions on UIDIGI firmware for TNC2s?
From: "Jeff Brenton" <jeffb@espi.com>
Date: Mon, 23 Oct 2000 08:55:05 -0500
X-Message-Number: 9
> supports TRACEn-n, something KPC-3 does not
Um... have you tried setting UITRACE TRACE on the KPC-3?
The Kantronics v8.x software is far from perfect, especially if configured
wrong. And UIDIGI does things "better", in that it extends the dupe
checking to ALL forms of digipeating, not just WIDEn/TRACEn. This is why
I've run the DOS APRSDIGI program for so long.
But, let's not get carried away with listing deficiencies that don't exist!
B-)
Jeff Brenton
President,
Engineered Software Products, Inc
http://espi.com
Questionable web page: http://dididahdahdidit.com
Liberalism grants you the freedom to advocate any idea*.
* Please see http://www.dididahdahdidit.com/except.php for a
current list of exceptions
----------------------------------------------------------------------
Subject: Reply to Bob's question on UIDIGI firmware for TNC2s?
From: "Hershel Saylor" <saylor@ori.net>
Date: Mon, 23 Oct 2000 08:54:47 -0500
X-Message-Number: 10
I have an 8 gang burner that I haven't used yet!
I also have some EPROMs.
What are the details? Keep in mind that I can't copy
any copyrighted stuff.
Feel free to email me directly on this and we can
post to the list any final info.
Hershel
> we need someone who has the time, and trouble to offer to program
> EProms for others, THen we will really see some global improvements in
> the APRS system... Any takers?
----------------------------------------------------------------------
Subject: JOTA-APRS-FRS-SCOUTS
From: Bob Bruninga <bruninga@nadn.navy.mil>
Date: Mon, 23 Oct 2000 10:00:42 -0400 (EDT)
X-Message-Number: 11
Lessons from APRS and JAMBOREE on the AIR:
Our 3 day "jamboree" had 600 WEBLOS scouts and 400 parents who came
through our stations in 18 groups of about 35 kids each plus parents. We
actually had TWO of the 30 minute time slots. One was for the 3 HF
stations doing classic JOTA. The other site was about 100 feet away and
was called "TECHNOLOGY". Both sites were VERY popular.
I did the TECHNOLOGY site where we had ATV, APRS, GPS, SATS, FRS, CPO's,
Flashing lights and CB. The ATV and APRS were in a large tent so you
could see the 4 color Laptops all showing APRS. Outside we had about 20
feet of tables with an assortment of CPO's, FRS, CB and handheld SATellite
stations. The idea was to let them send morse code from this table to
Read previous mail | Read next mail
| |