| |
ZL3AI > APRS 25.10.00 06:36l 193 Lines 7871 Bytes #999 (0) @ WW
BID : 34100_ZL3AI
Read: GUEST
Subj: TAPR Digest, Oct 22, 3/8
Path: DB0MRW<DB0RGB<OK0PPL<OK0POK<9A0YRB<VK6BBS<VK2CPG<VK2CZR<VK2IO<VK2GJB<
ZL2TZE<ZL2TZE<ZL2WA<ZL2BAU<ZL3VML
Sent: 001023/1048Z @:ZL3VML.#80.NZL.OC #:44471 [Chch-NZ] FBB7.00g25 $:34100_ZL3
From: ZL3AI@ZL3VML.#80.NZL.OC
To : APRS@WW
> | Consulting and Systems Integration
> | GPS Custom Mapping & Radio Coverage Surveys
> | File Conversions MS-Windows Setups VISCII Fonts
>
|---------------------------------------------------------------------------
--
>
> ------------
>
>
> ---
> You are currently subscribed to aprssig as: flingit@lather.com
> To unsubscribe send a blank email to leave-aprssig-18700I@lists.tapr.org
> Questions regarding the SIG go to the SIG administrator: wa1lou@tapr.org
>
----------------------------------------------------------------------
Subject: Fwd: Re: Thoughts on dual-band TNCs and cross-freq digipeating
sought...
From: Doug Bade <doug@ohioaprs.net>
Date: Sun, 22 Oct 2000 11:38:20 -0400
X-Message-Number: 8
>The configuration we used was to connect a kpc3+ to the repeater input for
>rx... use hold off mute control from carrier sense on 144.39, with tx side
>to 144.39... no muss no fuss.... one of the inputs on kpc3+ is
>configurable for a cd detect.... Works ok here... Doug KB8GVQ
>
>
>At 11:32 PM 10/21/00 -0400, you wrote:
>After the highly successful APRS demo with an emphasis on the TinyTrak
>encoder that I gave at a local ham club, a number of the members
>expressed an
>interest in using Mic-E devices on their voice radios on the club repeater.
----------------------------------------------------------------------
Subject: Fwd: Re: Thoughts on dual-band TNCs and cross-freq digipeating
sought...
From: Doug Bade <dbade@clecom.com>
Date: Sun, 22 Oct 2000 11:40:11 -0400
X-Message-Number: 9
>
>The configuration we used was to connect a kpc3+ to the repeater input for
>rx... use hold off mute control from carrier sense on 144.39, with tx side
>to 144.39... no muss no fuss.... one of the inputs on kpc3+ is
>configurable for a cd detect.... Works ok here... Doug KB8GVQ
>
>
>At 11:32 PM 10/21/00 -0400, you wrote:
>After the highly successful APRS demo with an emphasis on the TinyTrak
>encoder that I gave at a local ham club, a number of the members
>expressed an
>interest in using Mic-E devices on their voice radios on the club repeater.
----------------------------------------------------------------------
Subject: APRS and The New York City Marathon
From: Arte Booten <n2zrc@webspan.net>
Date: Sun, 22 Oct 2000 11:10:50 -0400
X-Message-Number: 10
Hi all,
Well, the Mile Captain's meeting for The New York City Marathon has
come and gone. I made my usual halfhearted pitch to The-Powers-That-Be
for inclusion of APRS ... and wound up with the same result as always: a
resounding no.
This is not to say that we'll never see APRS at the Marathon. I'd
like to equip one or two folks at Mile 21 (*my* mile) with a D7 & GPS
for use locally. This data would be fairly useless to anyone monitoring
us, unless you have street-level maps ... and even then you'd not know
what resource is being tracked (they'd be slow-moving pedestrians). My
intent with this experiment would be to show T-P-T-B a log file of acti-
vity.
At any rate, The New York City Marathon gets me on National TV ev-
ery year. For those of you that are curious as to what I look like, you
need to pay very close attention to your TV when The Marathon crosses o-
ver BACK into Manhattan from The Bronx, approaching Mile 21. You'll see
the runners cross under an overpass, cross a bridge and make a left turn
onto Fifth Avenue. I'll be on the next block on the left side of your
screen.
One of my responsibilities is to take down the numbers of the first
five male and female runners as they pass my mile. Preceeding the first
five males is the TV truck. I generally turn around and wave at the ca-
meras before I turn back to the runners ... this lasts for about two se-
conds. I'll be the guy wearing one of the famous bright orange "Amateur
Radio Emergency Communications" hats ... with an antenna sticking out of
the top of my head (actually, it sticks out the back, but it looks like
I'm doing an "Uncle Martin" imitation!) My two seconds of fame. 73
+----------------------------------------------------------------------+
|Arte Booten <n2zrc@arrl.net> AEC for Digital Services, NYC ARES/RACES|
|Riverdale, New York [FN30bu] !4052.71N/07354.06WNPHG5370/A=00240|
|Packet: N2ZRC@KB2VLX.#BRONX.NY.USA.NA HTX-202/RS Brick/KPC-3 6.0/X-510|
|PGP Key Fingerprint: D73E B889 C630 6F4A F31F 3083 56BD 0AAD 9996 3B03|
+----------------------------------------------------------------------+
----------------------------------------------------------------------
Subject: Fwd: [APRSUK] TM-D700E Queries?
From: Arte Booten <n2zrc@webspan.net>
Date: Sun, 22 Oct 2000 11:31:22 -0400
X-Message-Number: 11
Hi all,
Let me apologize for the length of this post, but I snipped as much
as I could while retaining essential information.
I received the following on the APRSUK list. Can anyone actually
confirm my suspicions?
Ken C. wrote:
>Does the D700 [only decode data on the main band] when using dual band?
It will decode data on the band designated as the data band via me-
nu item 1-6-1 (Radio-TNC-Data Band).
>When sending [one-liners] to a D700 the final line evoked the response
>rej13. Any ideas on what would cause this?
I haven't seen this myself with the D700, but it sounds analagous
to what sometimes happens to someone sending messages to APRSDos users.
The arrays in APRSDos are a set size, including the page that displays
incoming and outgoing messages. When the messages page has filled up
and the operator hasn't made any additional space by either killing his
outgoing messages (ACKed or not) and/or deleting incoming messages, the
program will send a reject frame. It takes the form of rej##, where the
## is the message number of the sender.
Since both the D7 and D700 also have arrays of predetermined size,
and since they flag unread incoming messages, I suspect that the same,
or at least an analagous, situation is occurring here. Try pressing the
F key for a second, then the messages key and have the D700 list the in-
coming messages. Is there a "page" symbol to the left of any messages?
These are unread. Read 'em! This should free those message slots for
new incoming messages.
BTW, there's an easier way to do this if you have quick fingers and
have the D700 set to beep on incoming messages. When you hear the dis-
tinctive "incoming messages beep", just press the OK key (the one on the
extreme right, next to the VFO-A Vol/Squelch dials). This tells the ra-
dio that you've read that message.
followed up with:
>I was contemplating changing to the D700, but in view of what you say
>above, think I'll leave it for a bit.
in reply to my:
>>[APRSDos sends] a reject frame ... [in] form of rej## ...
and adds:
>This ties in with my own assessment ... thanks for confirming it.
I can't honestly say that I confirmed it, as I've never seen this
happening. My statement was based on my experiences with APRSDos ...
which is the only other instance I'm aware of where rej## frames exist
within APRS-dom.
Still, as long as you read the message (or let the D700 "think" you
have), this isn't a problem. It's surely less of a problem than having
to have a separate radio, TNC and a PC in your vehicle for mobile APRS.
I recently bought a D700 myself and find it far more convenient to set
up and tear down in the truck I use for work (company's leased truck ...
can't drill or bolt anything 8-{(> ), than my D7a, PicoPacket w/GPS and
pocketAPRS.
In other words, this isn't a bug ... it's a feature! 73
+----------------------------------------------------------------------+
|Arte Booten <n2zrc@arrl.net> AEC for Digital Services, NYC ARES/RACES|
|Riverdale, New York [FN30bu] !4052.71N/07354.06WNPHG5370/A=00240|
Read previous mail | Read next mail
| |