| |
ZL3AI > APRDIG 20.12.03 09:28l 105 Lines 3569 Bytes #999 (0) @ WW
BID : 2523-ZL3AI
Read: GUEST
Subj: TAPR Digest, Dec 17, 4/4
Path: DB0FHN<DB0FOR<DB0MRW<OK0PKL<OK0PPL<DB0RES<ON0AR<ON0AR<WB0TAX<VK3AVE<
VK7AX<ZL2BAU<ZL2BAU<ZL3VML
Sent: 031220/0705Z @:ZL3VML.#80.NZL.OC #:14978 [Chch-NZ] FBB7.00i $:2523-ZL3AI
From: ZL3AI@ZL3VML.#80.NZL.OC
To : APRDIG@WW
Subject: Re: Holiday Traveling = 144.39 CTCSS 100
From: "Herb Gerhardt" <hgerhardt@charter.net>
Date: Wed, 17 Dec 2003 18:56:52 -0800
X-Message-Number: 22
I reposted Bob's message on our NW APRS SIG and since then I have been
hearing several HOME STATIONS on my D700.
Folks, the 100 CTCS tone is intended to be broadcasted by MOBILE STATIONS
only, not home stations. So, if you transmit a tone of 100 on your home
stationary stations, please turn it off.
Bob B, if I am mistaken, please set me straight.
Thanks,
Herb, KB7UVC
NW APRS Group, West Sound Coordinator
Our WEB Site: www.nwaprs.org
----------------------------------------------------------------------
Subject: Re: Holiday Traveling = 144.39 CTCSS 100
From: David VanHorn <dvanhorn@cedar.net>
Date: Wed, 17 Dec 2003 22:18:48 -0500
X-Message-Number: 23
At 06:56 PM 12/17/2003 -0800, Herb Gerhardt wrote:
>I reposted Bob's message on our NW APRS SIG and since then I have been
>hearing several HOME STATIONS on my D700.
>
>Folks, the 100 CTCS tone is intended to be broadcasted by MOBILE STATIONS
>only, not home stations. So, if you transmit a tone of 100 on your home
>stationary stations, please turn it off.
Specifically mobiles that are listening for it, not just trackers or
mobiles without voice capability on 2 meters.
----------------------------------------------------------------------
Subject: Re: Help: KPC3+ Schematic or PTT transistor #
From: Dale Mosby <dale@archcape.com>
Date: Wed, 17 Dec 2003 19:57:53 -0800
X-Message-Number: 24
I recently got a KPC3+. It came with a CD ROM that had the manual and
schematic. The three transistors that you see, Q1, Q2, and Q3 are PTT,
CTLA, and CTLB. They are all a 2N7000.
This is the part as shown on the schematic and also listed in the parts
list near the end of the manual.
I will mail you the schematic in a separate message. I'm posting this to
give others a chance to jump in should anyone wish to comment.
73, Dale, K7FW
dale@archcape.com
----------------------------------------------------------------------
Subject: Re: Help: KPC3+ Schematic or PTT transistor #
From: Richard Garcia <k4gps@bellsouth.net>
Date: 17 Dec 2003 23:15:23 -0500
X-Message-Number: 25
Great! Q1 is PTT... I was able to see the 2N2700 and I am hoping that
any old NPN will do it, but maybe it is a PNP. I'll have to see if I can
look it up. At least I only have to unsolder 1 transistor instead of 3.
I found 1 burned trace, fixed that but I was not lucky enough, I guess
it held long enough to take the transistor out. Hope that is the only
thing.
Like I said if I key the mic then key the TNC I hear a packet so that is
what I am assuming. I look forward to the schematic, I maybe have 1 hr
tomorrow to try to get it fixed before the trip.
Rich
----------------------------------------------------------------------
Subject: Re: Help: KPC3+ Schematic or PTT transistor #
From: David VanHorn <dvanhorn@cedar.net>
Date: Wed, 17 Dec 2003 23:23:14 -0500
X-Message-Number: 26
At 11:15 PM 12/17/2003 -0500, Richard Garcia wrote:
>Great! Q1 is PTT... I was able to see the 2N2700 and I am hoping that
>any old NPN will do it, but maybe it is a PNP. I'll have to see if I can
>look it up. At least I only have to unsolder 1 transistor instead of 3.
>I found 1 burned trace, fixed that but I was not lucky enough, I guess
>it held long enough to take the transistor out. Hope that is the only
>thing.
I have 2N7000's on hand, if you give me an address, I'll mail you a couple.
---
END OF DIGEST
Read previous mail | Read next mail
| |
