OpenBCM V1.13 (Linux)

Packet Radio Mailbox

DB0FHN

[JN59NK Nuernberg]

 Login: GUEST





  
ZL3AI  > APRS     21.10.00 03:35l 198 Lines 7031 Bytes #999 (0) @ WW
BID : 34044_ZL3AI
Read: GUEST
Subj: TAPR Digest, Oct 18, 2/4
Path: DB0MRW<DB0SON<DB0HBN<DB0SWR<DB0RBS<DB0PSC<DB0GE<LX0PAC<LX0HST<HA3PG<
      VE1DRG<N1UAN<N8ZFM<ZL2TZE<ZL2TZE<ZL2WA<ZL2BAU<ZL3VML
Sent: 001019/0950Z @:ZL3VML.#80.NZL.OC #:44157 [Chch-NZ] FBB7.00g25 $:34044_ZL3
From: ZL3AI@ZL3VML.#80.NZL.OC
To  : APRS@WW


Subject: Re: Hamtronics XMTR at 9600 baud
From: "Jeff Brenton" <jeffb@espi.com>
Date: Wed, 18 Oct 2000 10:04:24 -0500
X-Message-Number: 7

Hamtronics uses some slightly different components for their 9600-rated
exciters and receivers; you should give them a call or send them an email
(web page is http://www.hamtronics.com ). Their catalog states that you
need to add "HS" to the model number of the particular board to get the
correct components in the kit.

>From years of using Hamtronics parts, I think they're great... but, "out of
the box", they're optimized for voice, not fast data.

Jeff Brenton
President,
Engineered Software Products, Inc
http://espi.com
Questionable web page: http://dididahdahdidit.com

The FTC's top 12 reported email scams are listed at:
http://www.ftc.gov/bcp/conline/pubs/alerts/doznalrt.htm


----------------------------------------------------------------------

Subject: Re: [amsat-bb] Hamtronics XMTR at 9600 baud
From: John Magliacane <magliaco@email.njin.net>
Date: Wed, 18 Oct 2000 11:59:35 -0400 (EDT)
X-Message-Number: 8

On Wed, 18 Oct 2000, Bob Bruninga wrote:

> Has anyone modulated a HAMTRONICS TA-51 exciter with 9600 baud?
> It uses a phase modulator instead of a varactor.  Before I re-invent the
> wheel, just thought I would ask.

I've converted a TA451 to do true FM (and even AM) for 70-cm ATV use.
Details can be found at:

	http://www.njin.net/~magliaco/exciter.html

I basically threw a varactor (fed with audio + temperature-compensated
bias) and an inductor in series with the crystal to produce FM.  I also
had to "loosen up" a bit on the feedback capacitors in the oscillator to
get the oscillator to move with modulation.

It should be just as easy to do FSK with the same mod.


73, de John, KD2BD

--
-=-=-=-=-=-=-=-=-=-=-=-=- John A. Magliacane, KD2BD -=-=-=-=-=-=-=-=-=-=-=-=-
Internet  : kd2bd@amsat.org          |  Voice : +1.732.224.2948
Satellite : KITSAT-OSCAR-25          |  Morse : -.-  -..  ..---  -...  -..
Packet    : KD2BD @ WB2COP.NJ.USA.NA |  WWW   : http://www.njin.net/~magliaco/
Video     : 426.250 MHz/439.250 MHz  |  FAX   : +1.732.224.2772
-=-=-=-=-=-=-=-=-=-=-=- Linux Doesn't Cost.  It Pays. -=-=-=-=-=-=-=-=-=-=-=-


----------------------------------------------------------------------

Subject: findu down...
From: Steve Dimse <k4hg@tapr.org>
Date: Wed, 18 Oct 2000 12:02:16 -0400
X-Message-Number: 9

There is a problem in the database, it will take me a few more hours to 
rebuild it.

Basically, the max file size reported by MySQL was wrong, and I allowed 
the raw data file to grow past the limit, resulting in corruption. After 
cleaning out the file I need to rebuild the database for the last few 
days. I hope to have it up before this evening.

Until then, the map.aprs.net and map.findu.com addresses are redirected 
at an alternative server. The other cgi's, like weather, are unavailable.

Sorry for the problem...

Steve K4HG

----------------------------------------------------------------------

Subject: Re: Subject: Tracker construction
From: tarnerich@in-situ.com (Tony Arnerich)
Date: Wed, 18 Oct 2000 10:51:08 -0600
X-Message-Number: 10

"Brian Frobisher" <froby@earthlink.net>

>I was wondering if there are any ill effects when enclosing a =
>TNC/GPS/Radio inside a Pelican case with a gel cell lead acid battery.
>
>Does the battery pose any real threat to the electronics inside the =
>other components as long as it is relatively fresh etc?

Brian,

It will probably be fine for years though there is a non-zero risk. I've seen 
a number of old failed Pb-Acid gel cell batteries, and more than half of them 
had burst cases, some with bulges and leaked lead salts. The remainder had 
shrunken cases that didn't crack - but what left the case to cause the 
shrinkage? Probably acidic water. I've never seen any moisture on their 
exteriors, but that's no guarantee that none had escaped. If you left 
everything inside a sealed container past the point of battery failure, 
there's a chance that you'd cause some damage to the radio or TNC. You might 
want to use a secondary containment for the battery like a sealed Tupperware 
box with absorbent material, that would add some safety margin. You could 
also wrap the TNC and radio, at the risk of limiting heat dissipation from 
the radio (forcing a failure from a different cause).

You're right to not consider a flooded cell battery, that would be 
unconscionable! But any kind of battery even NiCd or NiMh has a chance of 
bursting and spilling it's guts. More than once I've had to scrape tenacious 
gunk out of battery compartments. Your best option is to isolate it, should 
it ever happen.

73,
Tony  KD7TA



----------------------------------------------------------------------

Subject: Garmin GPS+FRS Device!
From: Mike Musick <mcmusick@anet-stl.com>
Date: Wed, 18 Oct 2000 11:54:57 -0500
X-Message-Number: 11

It looks like Garmin has FCC approval to put digital positioning 

information on FRS. Check out:

   http://www.arrl.org/news/stories/2000/10/18/1/#garmin


   ...mike/N0QBF

----------------------------------------------------------------------

Subject: Re: [amsat-bb] Hamtronics XMTR at 9600 baud
From: Bob Bruninga <bruninga@nadn.navy.mil>
Date: Wed, 18 Oct 2000 13:18:13 -0400 (EDT)
X-Message-Number: 12

On Wed, 18 Oct 2000, Bob Bruninga wrote:

> Has anyone modulated a HAMTRONICS TA-51 exciter with 9600 baud?
> It uses a phase modulator instead of a varactor.  Before I re-invent the
> wheel, just thought I would ask.

Duh.. nevermind.  I called them and they are sending out an application
note.  You need to install your own varactor at the crystal so you can get
true FM.

bob



----------------------------------------------------------------------

Subject: Sunsat/STK
From: blitz <blitz@macronet.net>
Date: Wed, 18 Oct 2000 13:24:20 -0400
X-Message-Number: 13

Ok, thanks Earl...and everyone else for all the replies, I got it up and
running..
 ...Satellite Tool Kit is a marvelous program,  (http://www.stk.com) though
the learning curve is steep. It does everything, and its free, but like
WOW!  You gotta get the CD Rom, mine came in 4 days. This program blows the
doors off of sat-trak and the others I've used. Now Ive got to guess at the
aparature of the bird, plus mine, to illuminate the sensors. Im setting to
60 deg conical for now. Couple passes near the horizon should tell me if
thats even close. Again thanks all...


At 06:57 10/18/00 -0600, you wrote:
>At 08:16 PM 10/17/00 -0400, blitz blasted the following out into the ether:
>><snip>
>>I just labored through installing the STK software, now I'd like to load
>>the TLE's for Sunsat.
>>Ive got a comprehensive list from STK, but need the NORAD number that was
>>assigned to Sunsat so (hopefully) I can find it in the 8000 some birds.
>
>      Try doing a search for the name instead -- it's available in the TLE 
>window.
>
>      I'll be out of pocket until just after midnight tonight, so if you 




Read previous mail | Read next mail


 17.11.2026 10:51:04lGo back Go up