OpenBCM V1.13 (Linux)

Packet Radio Mailbox

DB0FHN

[JN59NK Nuernberg]

 Login: GUEST





  
ZL3AI  > APRS     16.10.00 03:51l 198 Lines 6536 Bytes #999 (0) @ WW
BID : 33987_ZL3AI
Read: GUEST
Subj: TAPR Digest, Oct 13, 2/5
Path: DB0MRW<DB0ERF<DB0ROF<DB0SRS<DB0ZDF<DB0GE<LX0PAC<LX0HST<HA3PG<WB0TAX<
      VK7AX<N8ZFM<ZL2TZE<ZL2TZE<ZL2WA<ZL2BAU<ZL3VML
Sent: 001014/1014Z @:ZL3VML.#80.NZL.OC #:43341 [Chch-NZ] FBB7.00g25 $:33987_ZL3
From: ZL3AI@ZL3VML.#80.NZL.OC
To  : APRS@WW


----------------------------------------------------------------------

Subject: Re: [ Ken Brown ] RE: Kenwood D7 owners...quick question
From: "Gregg G. Wonderly" <gregg@skymaster.c2-tech.com>
Date: Fri, 13 Oct 2000 09:12:37 -0500
X-Message-Number: 13


>To run it with an APRS PC mobile, I'm not sure offhand if you plug the GPS
>into the rig's port or into a PC serial port.  Maybe someone on the list
>will answer that one.

The THD7-A supports the TNC command "GPSTEXT $GPRMC" or other NMEA types
types to tell it to forward that data from the GPS port to the Serial port.  

So, you do just plug the GPS into the radio.

-----
gregg@c2-tech.com  (C2 Technologies Inc)



----------------------------------------------------------------------

Subject: ICOM IC-706 Packet Connector(s)
From: MStennettW@aol.com
Date: Fri, 13 Oct 2000 10:17:16 EDT
X-Message-Number: 14

>From what I understand, I have been told there are two methods of wiring the 
ACC 2 (rear panel connector;) for packet. 

Either wire for 1200 or 9600.

If you want both, you make TWO cables.

What about 144, and 440 performance on packet ?

How is the HF performance ?

 I plan to put this radio to work as a GATE.

Some said the receive capability of the 706M II G is too limited.

Those owners who are wired to ACC 2; in 1200 or 9600, please respond.

WA4TKG


----------------------------------------------------------------------

Subject: Re: FW: [aprshelp] Trouble w/winaprs&PM
From: "Gregg G. Wonderly" <gregg@skymaster.c2-tech.com>
Date: Fri, 13 Oct 2000 09:39:20 -0500
X-Message-Number: 15


>My problem is I tried to install the pmap.ocx to get the precision mapping
>working.  All seemed to go fine, however, when I start winaprs and try open
>a precision map, I get a Winaprs Alert saying Failed to create PMAP OCX
>control.  Then of course the map does not open.

This has usually happened to me when I did not run the batch file that 
registers the OCX.  But, the file might be corrupt or otherwise wrong.  Trying 
a fresh download of the OCX, paying special attention to making sure it is a 
binary download might solve the problem.  Netscape has a particular problem 
with downloading binary files.  In particular, if the web servers default file 
type is set to text/plain, netscape will get a text/plain MIME type from the 
server, and dutifully convert LF to CRLF on windows.  So, if you got the file 
via a web page, and the URL was HTTP, you probably got an ASCII converted file.

-----
gregg@c2-tech.com  (C2 Technologies Inc)



----------------------------------------------------------------------

Subject: REF:IC-706 M II G Packet Connector
From: MStennettW@aol.com
Date: Fri, 13 Oct 2000 10:50:31 EDT
X-Message-Number: 16

NOT ACC 2; 

I meant the 13 pin connector on rear panel.

73

----------------------------------------------------------------------

[spam deleted by ZL3AI]

----------------------------------------------------------------------

Subject: Re:  SUNSAT APRS SAT-GATES!
From: KC2EAW@aol.com
Date: Fri, 13 Oct 2000 11:19:32 EDT
X-Message-Number: 18

>From:  brianbr@macconnect.com (Brian B. Riley)

>> The wrinkle comes trying to GATE the SAT downlink to VHF. The way I
>> understand it, the software looks for the GATE command in the
>> path of the HF packet to xmit the packet back out to VHF. I don't
>> think there is any way to force the software to automatically gate all
>> HF packets to VHF. We can inhibit transmit on the D7 so nothing is
>> gated back to HF (which is actually the HT listening to the downlink).
>
> STEALTH digi and,  think, DigiNED will let you do this w/o GATE
>command.
>
While that is workable with WinAPRS, I'm working with a Mac. 
Unfortunately, STEALTH digi and DigiNED are not available for the MacOS.

Dan, KC2EAW

----------------------------------------------------------------------

Subject: Re:  SUNSAT APRS SAT-GATES!
From: KC2EAW@aol.com
Date: Fri, 13 Oct 2000 11:19:34 EDT
X-Message-Number: 19

>From:  bruninga@nadn.navy.mil (Bob Bruninga)
>To:    KC2EAW@aol.com
>CC:    aprssig@lists.tapr.org (TAPR APRS Special Interest Group)
>
>> Question is: Will SUNSAT digi a packet with a PATH of SUNSAT,GATE?
>
>YES< if we can get all uplinkers to include GATE in their path.
>
>Bob
>
So which way is easier, better, simpler (longer, lower, wider :-) ). Get 
the uplink folks to change their PATH or do it in software with something 
like DigiNED?

If we can get the uplinkers to add GATE, we've got a very simple solution 
already in place. No additional software needed.

Over the next few days, I'm going to try running the 2 TNCs. If that 
works as expected, maybe we can get a few stations that can get into the 
satellite to add GATE to their PATH and give it a rip.



73 de KC2EAW
Dan Speranzo


----------------------------------------------------------------------

Subject: /dev/null
From: Chuck Byam <cbyam@virginia.edu>
Date: Fri, 13 Oct 2000 12:01:30 -0400
X-Message-Number: 20

I hate to see it, but maybe it's time to modify the list config to stop some 
of this spam... I would hate to see it go moderated.

Chuck KG4IJB

----------------------------------------------------------------------

Subject: Gas Balloon Race and APRS!!
From: Brian Mileshosky <n5zgt@swcp.com>
Date: Fri, 13 Oct 2000 10:45:50 -0600 (MDT)
X-Message-Number: 21

Fellow Amateurs,

	For those of you who have been watching the Americas Challenge gas
balloon distance competition on APRS, I hope you have been enjoying it!
According to www.Explorium.org, 9 teams participated, and it appears that
2 are still airborne (given the last time they sent an APRS report...the
others might be in an area with poor coverage though).  According to the
map on this website I'm looking at, 7 are in the north-central part of the
United States, while two of the balloons are in the far northeast part of
the nation (Penn/NY border and New Hampshire).  And we've tracked them
continuously from the International Balloon Fiesta in Albuquerque, New
Mexico, where they launched from earlier this week!

	However, it is apparant that the race is not over yet.  If you own
an I-Gate, and live in the north-central and north-east parts of the
United States, or even Canada, PLEASE leave them on and allow the balloons
to be gated through. The callsigns for the balloons being tracked in
realtime on www.Explorium.org are:

KC5ORZ, KC2GUI, K5ZMU, KC2GXQ, N0QVB, KB8UXI, KD5KDN, N0XSZ, KC5VWK

	However, please let any other APRS tracker with a balloon symbol



Read previous mail | Read next mail


 17.11.2026 12:47:22lGo back Go up