| |
ZL3AI > APRDIG 27.09.03 09:17l 140 Lines 4251 Bytes #999 (0) @ WW
BID : 2000-ZL3AI
Read: GUEST
Subj: TAPR Digest, Sep 24, 3/3
Path: DB0FHN<DB0RGB<DB0MRW<DB0FOR<DB0SIF<DB0EA<DB0RES<ON0BEL<EA5RQ<KD4GBA<
ZL2BAU<ZL3VML
Sent: 030926/1342Z @:ZL3VML.#80.NZL.OC #:9084 [Chch-NZ] FBB7.00i $:2000-ZL3AI
From: ZL3AI@ZL3VML.#80.NZL.OC
To : APRDIG@WW
Subject: Re: WAS: TRACKING THIEF IS: 911 and GPS Phones
From: "Georgette Sampson" <georgette.sampson@cox.net>
Date: Wed, 24 Sep 2003 17:57:00 -0500
X-Message-Number: 24
I would have checked all the nearby trash cans. These guys know what they
can fence, and they chuck the rest.
Some throw your bag into the nearest trash can, and then come back later,
or after watching you drive off.
[I'll snip my engrave everything diatribe]
>If any of you see on E-bay or other place a Kenwood D7g for sale
>in the Monterey, CA area please send me the information so I
>can investigate.
----------------------------------------------------------------------
Subject: Re: APRS PERL SPLIT Help needed
From: James Washer <washer@trlp.com>
Date: Wed, 24 Sep 2003 16:44:40 -0700
X-Message-Number: 25
Andrew, I'm not certain what you are asking, since Jon and I both sent a
reasonable example.. Do you want a full program?
Try this...
#!/usr/bin/perl -w
while(<>){
m/^(\w+)>(\w+),([\w,]+):(\w+)/;
print "$1\n$2\n$3\n$4\n";
}
On Thu, 25 Sep 2003 08:03:21 +1000
"Andrew Rich" <vk4tec@hotmail.com> wrote:
>Thanks for your help Jon
>
>My final question is this:-
>
>How would one get
>
>CALLSIGN>DEST,DIGI,DIGI,DIGI:PAYLOAD
>
>to
>
>CALLSIGN
>DEST
>DIGI,DIGI,DIGI,DIGI
>PAYLOAD
----------------------------------------------------------------------
Subject: Re: PCB prototyping
From: Michael Harpe <mharpe79@yahoo.com>
Date: Wed, 24 Sep 2003 17:29:31 -0700 (PDT)
X-Message-Number: 26
I have used and can heartily recommend the Eagle CAD package for doing your
own boards. They have a freeware version that is very capable and only
limits you to two board layers and a 4" x 3.2" board area. For $125, a
hobbyist can purchase a non-commercial license that takes you up to 4
layers, large board area and unlimited schematic pages. Check it out at
http://www.cadsoftusa.com.
I have used PCB Express and Custom PCB in Malaysia for my boards. Custom
PCB was cheaper but had a much longer lead time. They also do SMOBC on
their prototype boards which is a nice feature. It makes the board much
easier to hand solder.
Good luck!
Mike Harpe, N4PLE
----------------------------------------------------------------------
Subject: Re: PCB prototyping
From: "Scott Miller" <scott@home.miller.org>
Date: Wed, 24 Sep 2003 18:02:45 -0700
X-Message-Number: 27
I use Eagle PCB's freeware version currently for all of my schematics and
layouts. I was just looking at the price list last night, but completely
missed the non-profit version. I don't have much need for 4-layer boards,
but the larger area would be nice.
Scott
----------------------------------------------------------------------
Subject: Re: PCB prototyping
From: Gregg Martell <gmartell@pobox.com>
Date: Wed, 24 Sep 2003 23:10:04 -0400
X-Message-Number: 28
For PCB designs I use ARES Lite from Labcenter Electronics
(www.labcenter.co.uk) which costs $35 to register. Add another $10-15 if
you want Gerber output. It's pretty powerful considering it's a lite
version of a professional package. It even has a single pass
autorouter. The only pro feature I wish it had is the netlist import from
the schematic design software that's included.
I've used Olemix in Bulgaria (http://www.olimex.com/pcb/index.html) to make
PCBs. Their basic board is either SS or DS with solder masked and silk
screening. They will panelize for free. I've done orders of one or two
boards, so I haven't had a big enough order for a volume discount. You
would have to check their website for volume pricing.
BTW, if you use "standard" shipping by postal mail, it takes about 3 1/2
weeks from order acceptance until they're delivered.
Gregg
KB3GMV
----------------------------------------------------------------------
Subject: APRServe IPs and Ports
From: "Jason Rausch" <ke4nyv@hamhud.net>
Date: Wed, 24 Sep 2003 22:30:40
X-Message-Number: 29
Are the IP's and port numbers publiclly available for US APRS servers. I
understand there are many, but for say the main servers: first.aprs.net,
second.aprs.net and/or third.aprs.net and corresponding port numbers for
feeding data in?
Thankx,
Jason KE4NYV
www.ke4nyv.com
---
END OF DIGEST
Read previous mail | Read next mail
| |
