OpenBCM V1.13 (Linux)

Packet Radio Mailbox

DB0FHN

[JN59NK Nuernberg]

 Login: GUEST





  
ZL3AI  > APRS     13.10.00 03:44l 209 Lines 7642 Bytes #999 (0) @ WW
BID : 33910_ZL3AI
Read: GUEST
Subj: TAPR Digest, Oct 09, 5/6
Path: DB0MRW<DB0PV<DB0AAB<DB0KFB<DB0CZ<DB0GE<LX0PAC<LX0HST<HA3PG<VE1DRG<
      N1UAN<N8ZFM<ZL2TZE<ZL2TZE<ZL2WA<ZL2BAU<ZL3VML
Sent: 001010/1243Z @:ZL3VML.#80.NZL.OC #:43034 [Chch-NZ] FBB7.00g25 $:33910_ZL3
From: ZL3AI@ZL3VML.#80.NZL.OC
To  : APRS@WW


Hi all,
<BR>The APRS in Indiana mailing list has been started. If you would like
to join send a blank email to <A
HREF="mailto:aprsinindiana-subscribe@egroups.com">aprsinindiana-subscribe@egrou.
pscom</A>
.. Everybody is welcome and is encoraged to join. If you have any questions
please email me.
<BR>Thanks,
<BR>Zachary Michael, KB9UQQ,
<BR><A HREF="http://www.aprsinindiana.cjb.net">APRS in Indiana
Chairman</A></HTML>

--------------715B93DEA3BC109CDB183483--


----------------------------------------------------------------------

Subject: Firmware updates from Garmin

From: "Smith, Tim" <n1btq@ne.mediaone.net>
Date: Mon, 9 Oct 2000 17:15:12 -0400
X-Message-Number: 24

Just notices some new firmware postings on Garmin's support site at
http://www.garmin.com/support/download.html

eMap version 2.06 was just released Friday.

Several other models have new firmware within the last 30-60 days.  Alot of
bugfixes for the eMap though.

73,

Tim

http://map.findu.com/n1btq-5



----------------------------------------------------------------------

Subject: Re: KPC3+ Owners
From: RMckni8527@aol.com
Date: Mon, 9 Oct 2000 18:37:03 EDT
X-Message-Number: 25

In a message dated 10/9/00 1:09:04 PM Pacific Daylight Time, 
KO6ZL@MAHA-COMM.COM writes:

> KPC Users,
>      I am unclear of the MEMA format and protocol. My ultimate goal is to
>  have my KPC3+ output waypoints to my Garmin GPSmap162.

Unless my memory is totally gone or I am hallucinating, what you are asking 
for is not possible.  Few GPS's accept NMEA input.  Most will ingest RTCM104, 
which is the DGPS reference correction signal, but this isn't NMEA.  Some (as 
I believe yours and most mid-high range Garmin's can) will accept serial 
input from say a PC to load  waypoints.  In fact, there are a few 
shareware/freeware programs to specifically do this.  And the KPC-3+ doesn't 
output NMEA, only serial data (and yes, for the purists on the sig NMEA is a 
form of serial data, but the KPC-3+'s serial data output isn't NMEA format).  
I know of no TNC's that output NMEA.  

There may be some gee-whiz gizzmo that you can add, or a piece of software 
floating around somewhere, but I'm not aware of anything that converts or 
"parses" NMEA strings into a serial stream that your Garmin will like.


As far as the actual NMEA format, www.nmea.org owns it and asks a HEFTY price 
for a copy of the specification - $125!  There may be some public web sites 
that post some or all of it, but good luck finding it, I've been snooping 
myself and all you seem to find are NMEA sentences supported by specific 
devices or manufacturers.  Your Garmin manual surely has a brief list of what 
it outputs.  Wait a few weeks, after all this annual Continuing Resolution 
garbage is settled, I'll be ordering a copy of the spec for work.

Hope this helps

73's
Ray - WB3ABN
Kingston, WA

----------------------------------------------------------------------

Subject: Re: KPC3+ Owners
From: "Robert Donnell" <kd7nm@pugetsound.net>
Date: Mon, 9 Oct 2000 16:33:09 -0700
X-Message-Number: 26

Hi Ray, and all

There does happen to be a TNC that parses APRS data and sends output to
Garmin GPS's.  It encodes the last 6 characters of the station's callsign
(including SSID) as the waypoint name, and sends that information to the
Garmin GPS's in a manner that creates (or updates) the waypoint.  That TNC
is the one that's in the Kenwood TH-D7A.  My Garmin GPS III+ has about 120
local station locations entered as waypoints, any of which I can select and
retrieve their locations, or use as a navigational destination.  I assume
since the Kenwood handheld radio does this, that the mobile is also capable
of this feat.
And while NMEA defines an electrical signal standard that isn't the same as
RS-232, most RS-232 devices interact with most NMEA devices in an acceptable
manner.  It's much the same as it's easily possible to connect RS-422
devices (Apple Macintosh computers, for example) with RS-232 devices and
establish functional serial communications.

73, Bob, KD7NM

-----Original Message-----
Unless my memory is totally gone or I am hallucinating, what you are asking
for is not possible.  Few GPS's accept NMEA input.  Most will ingest
RTCM104,
which is the DGPS reference correction signal, but this isn't NMEA.  Some
(as
I believe yours and most mid-high range Garmin's can) will accept serial
input from say a PC to load  waypoints.  In fact, there are a few
shareware/freeware programs to specifically do this.  And the KPC-3+ doesn't
output NMEA, only serial data (and yes, for the purists on the sig NMEA is a
form of serial data, but the KPC-3+'s serial data output isn't NMEA format).
I know of no TNC's that output NMEA.



----------------------------------------------------------------------

Subject: Re: Firetalk
From: KC2EAW@aol.com
Date: Mon, 9 Oct 2000 20:37:33 EDT
X-Message-Number: 27

Just went to check out Firetalk and discovered they don't have a Mac 
version of their software. Oh well, guess I'll stick with iVisit.

Dan Speranzo
KC2EAW

----------------------------------------------------------------------

Subject: SUNSAT 10:19 pass/SM7WDL
From: "John Anderson" <af9t@cp.duluth.mn.us>
Date: Mon, 9 Oct 2000 19:48:00 -0500
X-Message-Number: 28

I left my D700 on 145.825 overnight after getting my first successful aprs
transmission through SUNSAT Sunday evening. I looked at my stations list
this morning and see
KB2WQM-4     10:19
N3ZLL-2            10:21
N3ZLL-9           10:21
SM7WDL           10:23    grid JO65MN and distance of 4597 mi.
A bulletin also on radio from SM7WDL at 10:23   to" Download UI-View maps at
www.qsl.net/sm7dkf/"

I am a still a newbie to satellite operatiions and wonder if this came
through SUNSAT or maybe some other satellite??  Or was this relayed by some
other station? This is by far the greatest distance I have heard an aprs
signal on my equipment. 73, John AF9T


----------------------------------------------------------------------

Subject: RE: FM Satellite Summary (October)
From: Bob Bruninga <bruninga@nadn.navy.mil>
Date: Mon, 9 Oct 2000 21:16:49 -0400 (EDT)
X-Message-Number: 29

On Mon, 9 Oct 2000, David Locke wrote:

> Is there a simple way to figure out where these birds are?

Absolutely.  Get someone within about 100 miles of you to run APRSdata.exe
on 144.39.  It will post any of the FM satellites in view as OBJECTS in
your area on 144.39 so that you will see them on your THD7 or D700 front
panel.  ALso once every 10 minutes, it updates your DXLIST with a schedule
of all satellies expected in the next 80 minutes with a single packet.

Then you nor anyone else within 4000 square miles has to do anything, but
the info is always available in your radio at all times...

See http://web.usna.navy.mil/~bruninga/satinfo.html

de WB4APR, Bob



----------------------------------------------------------------------

Subject: Re:25+ Gas and Hot Air Balloons on APRS!
From: "Brian P. Mileshosky" <n5zgt@swcp.com>
Date: Mon, 9 Oct 2000 20:31:59 -0600
X-Message-Number: 30

APRSers,

    So far the weather has not been cooperating much here in Albuquerque at
the International Hot Air Balloon Fiesta, which is why you have probably
seen nothing on your screens! Hopefully once conditions improve, the 25+ gas
balloons competing in the America's Challenge gas balloon race will launch
and be on their way.
    So keep an eye on your APRS screens, and head over to www.explorium.org
for real-time findu.com screenshots of all the competing balloons!  If you
have an I-gate in your area, leaving it on will sure help us out so we can




Read previous mail | Read next mail


 17.11.2026 14:45:47lGo back Go up