| |
CX2SA > SAREX 28.04.07 18:34l 43 Lines 1572 Bytes #999 (0) @ WW
BID : 15190_CX2SA
Read: GUEST OE7FMI
Subj: Retransmission of ISS packets
Path: DB0FHN<DB0FOR<DB0SIF<DB0GV<DB0LJ<DB0RES<DK0WUE<7M3TJZ<HS1LMV<CX2SA
Sent: 070428/1730Z @:CX2SA.LAV.URY.SA #:15190 [Minas] FBB7.00e $:15190_CX2SA
From: CX2SA@CX2SA.LAV.URY.SA
To : SAREX@WW
[sarex] Retransmission of ISS packets
======================================
In preparation for ISS coming back up on 145.880 in packet mode, I would like
to relay all packets received to my 440 repeater output to increase local
interest in ISS activities.
I must admit I am over my head in setup and connection of the TNC.
I have a 10 year old TNC-3 (not Plus) with version 6.0 software on it. While it
has served me well with ISS UNPROTO, I would now like to have it work at the
repeater site, receive on 145.800 and feed into the cor/ audio chain of the 440
transmitter...sounds simple...
Not to me! TNC-3 is no longer supported by Kantronics, All setups that look
appropriate utilize version 8.13 using UI*** commands not acceptable by ver.
6.0, and UIView has come on the scene along with the move toward WIDEn-N.
My brain is fried trying to figure this out. Is there an Elmer out there that
could help me work through this? I must be missing something.
As 145.800 is a "clear channel" I could repeat all and just use a COR but that
seems messy for packet along with the potential for missing the early portion
of the opening packet.
Please reply directly...and help me un-fudge my brain...
Thanks!
Roger
WA1KAT
rogerkola(AT)aol.com
----
Sent via sarex@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/sarex
Read previous mail | Read next mail
| |
