OpenBCM V1.07b12 (Linux)

Packet Radio Mailbox

DB0FHN

[JN59NK Nuernberg]

 Login: GUEST





  
VK3API > SALLY    07.11.07 14:42l 46 Lines 1285 Bytes #999 (0) @ WW
BID : 3E0294VK3API
Read: GUEST DL6DBA
Subj: Help with Setup problem
Path: DB0FHN<DB0MRW<DB0ERF<DB0FBB<DB0IUZ<DB0GOS<DB0RES<F5GOV<F4BWT<I0TVL<
      VK2TGB<VK7NW<VK4TRS<VK3API
Sent: 071105/0521Z @:VK3API.#MEL.VIC.AUS.OC #:62695 [Lilydale] FBB7.00g
From: VK3API@VK3API.#MEL.VIC.AUS.OC
To  : SALLY@WW


Hi All,

After seeing a report about the program SALLY on packet I downloaded a
copy 
to see how it works.

I am using it with BPQ32  and can send outgoing data but not receive 
incoming. I can see the data from the tnc (in kiss mode TNC-320 dual port)

on a break out box and can receive it with hyperterminal but can't receive

any data in Sally.


BPQ is set to a single port (com 1 set to 8 bits 1 stop no parity and 
hardware control).  A copy of uiview will also work ok from the same 
computer using KISS mode (computer is running XP pro) 


All the outgoing seems to work ok and I can initiate connections and see 
the connect acknowledged from the other tnc (I am monitoring the channel 
with a third system) and so on, just Sally can't see any of the receive 
data from the TNC.

Any suggestions would be welcome.


Also is it possible to set an SSID for the BBS you wish to use. My BBS (on

a different computer) uses the callsign VK3API-1 however Sally doesn't
seem 
to want to let me set that in the config files.


                                   Regards Tony VK3API

73 - Tony, VK3API @ VK3FBD.#MEL.VIC.AUS.OC

Message timed: 14:16 on 2007-Nov-05

This message originated in Lilydale Melbourne Victoria Australia


Read previous mail | Read next mail


 17.03.2025 14:04:50lGo back Go up