| |
ZL1UIC > SALLY 24.05.04 08:03l 37 Lines 1278 Bytes #999 (0) @ WW
BID : 970608ZL1UIC
Read: GUEST
Subj: Re: RE(3): Start error!
Path: DB0FHN<DB0RGB<OK0PPL<DB0RES<ON0AR<7M3TJZ<ZL2BAU<ZL2BAU<ZL1UX
Sent: 040524/0458Z @:ZL1UX.#20.NZL.OC #:12183 [Hamilton] FBB7.00i $:970608ZL1UI
From: ZL1UIC@ZL1UX.#20.NZL.OC
To : SALLY@WW
> rom: UT1HZM @ R3CR.MSK.RUS.EU (Serge)
> To: SALLY @ WW
> Reply-To: UT1HZM @ UT4NF.VIN.UKR.EU
> X-Info: No login password
>
>
> Allen, you mean that Sally will not work on same PC, where is Winpack
> runs? :-/
>
> 73! Serge
Yrs, that was correct. I had been running Winpack 6.80 with AGW, with no
problems.
Although I could get Sally up and running, I went through the
configuration screens scrwwns, and although I selected AGW, it would not
recognise that it was there.
I decided to give up on it meantime, and went back to Winpack. It was
then that it wouldn't work. rx or tx.
I then proceeded to uninstall Sally, but it still wouldn't work.
The rest is history, as has been mentioned in several bulletins.
I had at that point installed Sally 3.122 and AGW2002.308 as had been
suggested, but still no operation of Sally, or Winpack afterward.
Therefoe I am very suspicious of Sally, especially if running on the same
machine as Winpack. Hence my comment about trying on a different PC with
another modem.
Once bitten, Twice shy, as they say...
73 - Allen, ZL1UIC @ ZL1UX
Message timed: 16:42 on 24 May 04, using WinPack-AGW V6.80, P233,
W98se, AGW-PE, Baycom modem, IC-2A, Digitor 30w amp.
>/ex
Read previous mail | Read next mail
| |
