| |
I6KZR > SALLY 19.04.04 11:49l 106 Lines 3105 Bytes #999 (0) @ WW
BID : 4583_I6KZR
Read: DC3RJ GUEST
Subj: Re: Sally/AGW/Baycom modem.
Path: DB0FHN<DB0RGB<DB0MRW<DB0WUE<DK0WUE<DB0RES<ON0AR<IK1ZNW<IK2QCA<IK2YHJ<
IK2NBV<I4UKI<IK6ZDE<I6ZLO<IQ6TC
Sent: 040419/0845Z @:IQ6TC.#AP.IMAR.ITA.EU #:28948 [PORTO S.GIORGIO] FBB7.00i
From: I6KZR@IQ6TC.#AP.IMAR.ITA.EU
To : SALLY@WW
cc.
Inviato da: I6KZR@IQ6TC.#AP.IMAR.ITA.EU ZL1UIC@ZL1UX ZL1UIC
In un suo messaggio ZL1UIC ha scritto:
}
} From: ZL1UIC@ZL1UX.#20.NZL.OC
} To : HELP@WW
}
}
} Thisnis a resend
}
}
} Title : AGW+Sally+Baycom?
}
} Hi All,
} After trawling the I/net one nit, I downloaded a few packet
} programmes.(TSTHost, T4 & Sally 3)
} I loaded Sally, and when I tried to run it I drew a blank,
} needing a file MSVBVM60.DLL, which I duly copied from the Inet PC, which
} runs XP.
}
} My Packet PC is a P233, 64 mg RAM, & running W98SE (which was an
} upgrade for Win 3.1 to w95) and AGW 2002.10. The file in my PC was
} MSVBVM50.DLL, so when I loaded the later file, Sally 3 then ran.
} I tried to get it set up the best I could determine from the help
} available, but was unsuccessful.
} It appears that a TNC is required, but all I have is a Baycom
} modem.
} The question is, will Sally run with a Baycom modem, and if so,
} where have I screwed up?
} It looks like a promising programme, *IF* I can get it running
} with my current setup.
}
} I would like to try this programme if I could.
}
} Thus, I await info for setting it up including a relevant script
} for it, also. From what I have seen, but not worked, it looks very
} promising.
} I feel I have the right combo, but not the right clues, which is
} why I would like pointers to at least get it started operationally, as I
} will
} find much more about it when it runs.
}
} Any help will be very much appreciated.
}
} 73 de Allen, Cambridge, N.Z. RF72RC
}
} ZL1UIC @ ZL1UX.#20.NZL.OC
} allengilbert@clear.net.nz
}
} X: "It is better to remain silent & be thought a fool,
} than open one's mouth and remove all doubt."
}
} Message timed: 18:13 on 09 Apr 04, using WinPack-AGW V6.80, P233,
} W98se, AGW-PE, Baycom modem, IC-2A, Digitor 30w amp.
Hallo Allen,
Sally works very well with Baycom modem and AGWpe driver.
First of all download at http://www.elcom.gr/sv2agw/ the last version of AGWpe
2002.308 and control that there is the Baycom driver in it.
Then, install Sally full version and upgrade it with the last version 3.2.130.
Set AGWpe for Baycom modem and SALLY for AGWpe.
You must configure SALLY before with some scripts, some examples are in the
scripts folder, many configuration snapshots can be found in my site
http://i6kzr.it menu downloads / Sally.
Remember, SALLY is a 32 bit very powerful program, it no needs accessory little
external programs to process activity even if this it is possible to extend it's
future features.
Frase del giorno:
Computer: un macchina progettata per velocizzare e automatizzare gli errori.
(Anonimo)
73 Ciao a tutti Renzo.
li, lun 19 apr 2004 10:26 (+2.00) CDT
/___/____/
/ / /
||
|| I6KZR Fermo, Italy
|| BBS I6KZR@IQ6TC.#AP.IMAR.ITA.EU
|| e_mail i6kzr@i6kzr.it
|| web http://www.i6kzr.it
|| TCPip: 44.134.243.003
Messaggio inviato con Sally V3.2.130 software packet per Windows 32bit.
Read previous mail | Read next mail
| |
