| |
WI8W > RTTY 02.04.05 06:14l 372 Lines 18716 Bytes #999 (0) @ WW
BID : RTTY05-04
Read: GUEST OE5EWL
Subj: RTTY Gazette - April 2005
Path: DB0FHN<DB0CL<DB0PDF<DB0SM<DB0EA<DB0RES<DK0WUE<7M3TJZ<ZL2BAU<ZL2AB
Sent: 050401/2127Z @:ZL2AB.#46.NZL.OC #:59935 [New Plymouth] FBB7.00g $:RTTY05-
From: WI8W@ZL2AB.#46.NZL.OC
To : RTTY@WW
RTTY Gazette - April 2005
Greetings, everyone and welcome to this issue of the RTTY Gazette. A few
subscribers volunteered some interesting things for this issue. This promises
to be our largest issue yet, so let's get started.
I am writing this issue as the FT5XO DXpedition to Kerguelen Island is
closing up shop after providing contacts to thousands of deserving amateurs.
They were active on SSB, CW, and RTTY. If you were one of the lucky ones
to bag them on RTTY, I envy your accomplishment. The propagation gods
were not in our favor here in Michigan as I had only one brief 15 minute
opening on 30 meters. I heard plenty of stations in the pileups but nary a
whisper from FT5XO. Nope, no RTTY contact for station WI8W. The usual
lids were apparent with many calling on their transmit frequency. Apparently
they do not know the meaning of…UP UP.
All was not lost though as on Monday evening past I did manage to bag them
using our most primitive digital mode…CW. Well at least I will get a card
and can say that I did get to work em! I wonder if they are producing a
video of the effort?
How about you? Got any stories to tell? How did you bag em?
So now the sun has crossed the Equator on it's yearly travels into the
Northern Hemisphere which will bring high static levels to the low bands and
maybe some enhanced propagation to the high ones. There are a few more
great DXpeditions coming up that we can all chase down for that new one in
the log.
It is also almost antenna season. I have some new things I want to put up and
some things that need a bit of fixing. How about you? What are you planning
for the coming season?
Beginning in this issue, and continuing in a few future issues, we will be
presenting a overview of linked digital modes written and provided by
Jeremy N1ZZZ. Here is the first part, reprinted with permission of Jeremy.
Ham Radio Linked Modes:
By Jeremy Allen N1ZZZ
This is the first of a series of articles that I hope will shed some light
on the various linked modes used in radio today, especially in the HF
bands. Linked, or burst modes, is the family of protocols that link one or
more stations for the purpose of transmitting error-free data, usually at
moderate to fast rates.
Linked modes vary, however they have many common requirements. In every
linked mode, the T/R switching speed and timing are critical. Most modern
transceivers are quick enough to meet these requirements, but some old
"boat anchors" are not the best choice for linked modes. Also, most
soundcard applications are not suitable for linked modes because of the
timing delays that are inherent in many computer operating systems. The
exception to the timing rule is packet, which has a looser timing sequence.
Soundcard packet is the only viable linked mode currently available. Also
important is frequency stability. This is very important for some of the
fastest modes such as Clover and PacTor 2/3. In any case, if the frequency
of the signal drifts too much, then the link will be lost.
Linked modes are found as part of MCP's (multi-mode control processors).
There are a wide variety of controllers on the new and used market.
Various modes are available on the different models, however almost every
MCP will have AMTOR, and PacTor linked mode, as well as older modes such
as Baudot RTTY. A number of manufacturers market MCP's with proprietary
modes, so choosing a MCP is a combination of performance as well as desired
features and modes.
As a result of the surge in the use of the Soundcards, MCP's is a buyers
market. Good MCP's can be obtained for under $100 dollars now, so now
many of these linked modes are available even to budget-conscious hams.
The major strength of all linked modes is error correction. Although it
might take awhile to pass the message, operators can be certain that
whatever is on their screen was what the other station sent. While modes
like PSK31 and MFSK16 are very robust, and incorporate FEC, it is not
uncommon at all to get junk characters on the screen. This is not the case
with the linked modes. In addition, with the exception of AMTOR, linked
modes can transmit binary files at fairly fast speeds, enabling users to
transfer more than just text. Graphics files and even short programs can
easily be exchanged with little worry about corrupt or missing data. So
despite the increasing popularity of the soundcard modes among digital
operators, the burst modes continue to hold a place in the ranks of amateur
radio.
AMTOR: The First Amateur Linked Mode
Before AMTOR hit the amateur airwaves around 1983, the only method
to move text over the amateur airwaves was RTTY. The problem with
RTTY was that there was no error correction at all. If any of the
bits were corrupted enroute, the text was not displayed correctly.
In order to introduce some error correction into digital
communications, a mode called SITOR was developed for commercial
use. This mode was adapted for use in amateur radio by G3PLX, and
called AMTOR, which means Amateur Teleprinting Over Radio. Amtor
uses the 5-bit Baudot code, the same as RTTY, which allows for
operators to pass capital letters, number, and a limited number of
symbols. Lower case letters cannot to be transmitted because there
are not enough bit combinations in the Baudot code to encode them.
This problem would have to wait for more advanced modes to be solved.
AMTOR comes in two flavors, or Modes. First is Mode-A, or ARQ
(automatic Repeat Request), which is when two stations are linked
and exchanging date. Mode-B uses FEC (forward error correction)
which basically repeats every bit twice, with the hope that one of
the two will get through to the other station. Mode-B is used for,
broadcasting, round table discussions, and calling CQ. This signal
sounds somewhat like a standard RTTY signal. The best place today
to listen for a Mode-B signal is to listen to the W1AW bulletin broadcast.
Mode-A is the most well known AMTOR mode. The signal sounds like
a series of chirps as the two stations exchange data. The link is
established when one station uses a 4-letter SelCal code to call the
other station. Selcals are most likely a contraction of the
station's call sign. For example, my selcal is NZZZ, omitting the
1 of my call sign. Usually the terminal software will automatically
transform the station's call sign into a selcal. The software will
also display the set selcal when calling CQ in mode-B to eliminate
confusion, and allow the other station to initiate the link.
When two stations are linked, the one sending data is called the
master, or ISS (Information sending station) station; whereas the
receiving station is the slave, or IRS (information receiving
station). The ISS will send data in 3 character blocks. If the
whole data block is received without error, the IRS will send an
ACK (acknowledge) signal, and the ISS will send the next block of
data. If the data is corrupted en-route, the IRS will send a NAK
(not-acknowledge) code, and the ISS will resend the block until it
is received correctly. The ISS will also resent the data if no
signal or a corrupted ACK/NAK signal is not received from IRS.
When the ISS is through sending data, the operator sends a specific
command and the ISS becomes the IRS while the IRS becomes ISS.
Under good conditions, an AMTOR link will pass data at about 100
baud. This will exchange text as fast, or faster than most people
can type. This mode, because of the Baudot code, cannot be used
to exchange data files however, but is good for keyboard QSO's. If
the conditions are not very good, the throughput will be reduced
dramatically as the number of NAK signals increases. If the
conditions really take a dive, the link will fail as the number of
repeats exceeds a preset number. At this point MCP, will inform
the operator of the link failure and go back to a standby mode.
So how do we get on AMTOR? The best way to get on AMTOR is through
a Multimode Control Processor (MCP). Most any MCP available today
will operate both Mode-A and B. Soundcards, the new rage among
digital operators, can be used to work Mode-B but because of timing
issues on most operating systems, Mode-A is not feasible. The real
issue with AMTOR is that there are better, more robust modes, such
as PacTor out there, so the use of AMTOR has reduced to a trickle.
There are some AMTOR signals out there, mostly around 14.080 LSB on
20 meters, but a sked would probably be the best way to get some
AMTOR QSO's in the log.
In the next installment, we will look at the "improved" version of
AMTOR, PacTor.
Thanks Jeremy…part 2 next month.
Next we have a short article from Jeff N3YEA. Not necessarily about digital
communications but it just might get you to thinking about how you got
started in this wonderful hobby. I know I am thinking about it right now.
Here is Jeff's article.
I was always interested in radio , as a young child I would do odd jobs to
get enough money to buy the small short-wave receiver kits. String a long
wire across the backyard , which seemed high to me, but my Dad would
always run into them when he was mowing the yard.
I would tune around the SW bands for hours, listening to all the different
languages, and those strange signals. Then someone gave me a Zenith
Trans-Oceanic , which really opened my world up. I would log the different
stations, and spend hours searching for new stations and those strange
signals. I received an Amateur License Study Guide, but being 10 to 12
years old - I understood very little in it, but I think I memorized most of
it, just by reading it so often. I never could find a Elmer, back then you
really didn't have an easy way of finding one, if you didn't know someone,
or knew someone who knew someone.
It was also when you had to travel to a major city to take the tests - which
I never felt confident enough in my knowledge to ask my Dad to take a day
off of work to drive a couple of hours to take the test. Heck - I didn't
have any money for rigs anyhow. I remember dreaming over the newest
Heathkit catalogs I would get. But then - I got into junior and senior high
schools and discovered sports, girls and cars and the hobby was forgotten.
Upon graduating from high school, I enlisted in the U.S. Army - where I
wanted to be a truck driver, but their testing revealed that I had an
aptitude for something else, in the "Army Security Agency" . But they
couldn't tell me exactly what it was , because it was classified.
So - off to Security Agency school I went - and lo and behold - the first
part was learning CW , so for 3 months, 6 hours per day, I learned CW ,
and when you spend that much time learning it - you learn in very well. The
next few months were spent learning how to receive ( intercept ) RTTY
signals. You can imagine my glee, getting my hands on all those "state of
the art" R-390's , and the teletype machines, along with all the
demodulators. And the antenna arrays !!! -- simply amazing to me.. many
times, I would go in during my off hours, find an un-used R-390 and tune
around , listening to even more stranger signals...
When my service time came to an end, I got back into the mainstream of life,
and radio bug again took a back seat, to getting married, buying the first
house, raising a daughter and so on.. When my grandfather passed away,
one of the things I was given, was a radio he had, that used to listen to
the ballgames on. It also had a short-wave band on it, so there I was
again, listening to the signals -- and this time - I could identify some of
the them! Well, the bug was back , and I bought another up to date study
guide. Now I had the internet to look up information - Wow - you could go
somewhere local and take the test! so after a couple of months of studying,
with my wife and daughter reading the practice questions to me at the
dinner table, and getting back up to par at CW. I was surprised, that after
nothing to do with CW for 21 years - it came back fairly easily. I contacted
a local club and registered for their next test session. That October
evening, I passed the 13 WPM code test, the Novice, Technician, and
Technician plus exams. The first rig was a used Kenwood TS-520s and a
Hustler 5 band vertical antenna and a straight key.. So many bands, so many
people talking, so many on CW and there were those RTTY signals. After
listening for a couple of weeks waiting on my call to be assigned and to
get the feel of how things worked - it was time. Armed with my new
callsign, clammy palms, and shaking hands -- I tuned around the 80 meter
CW band.. and there he was - KB9NUG , calling CQ .. I tapped out my call
sign twice .. and HE ANSWERED ME !
It's funny how you remember your first contact -- at least I do.. When I
told him he was my very first contact, and that I was very nervous, he
kept offering to QRS, and I kept telling him the speed was fine - no
problem at all. It turned out he was visiting his father in Chicago, using
his fathers rig. That is how they kept in touch, His call was WB9BXX, and
when I got his qsl card - he had written on it, something that I think I'll
always remember -- " Thanks for making me your first contact."
But I couldn't stay away from the digital portions of the bands -- my first
TNC was a MFJ-1278. Since then, I have learned so much, have met so many
people, and have
upgraded my equipment and license. I'm now running a Yaesu FT1000MP Mark V,
and a Rigblaster and am just about exclusively digital. I still have that
520 S and 1278 sitting on my desk, I should sell it - but there are so many
memories attached to it -
I hand out points in most every RTTY contest , and very rarely turn in a
score sheet - I send in my logs for check logs.
It's funny - during contests, at times, I'll listen to those RTTY tones,
and I'll be taken back to my Army days, turning the big knob on the R-390,
getting the "crossed banana's " just right, and hearing the teletype machine
behind me, hammering out the letters and numbers. Then further back, to a
little black plastic short-wave radio kit I built.
73 , de
Jeff - N3YEA
Thanks Jeff, I may just put my story in here in a future issue.
Have you got a story to tell? I am sure there are others who would like to
read about it.
As you are probably aware this publication is distributed world wide not
only through email but also on PACKET, AMTOR, PACTOR and other networks.
If you are responsible for placing this publication on any outside networks
please contact me. I would like to try to get a feel for just how large an
audience this publication reaches. I also would like your input on the
ability of those networks to handle graphic images and PDF files.
I would also like input from you, the reader, on the subject of including
images in the RTTY Gazette. There is a lot we can do with this
publication. Let's explore the possibilities.
That about does it for the news and features…on to the Announcements.
***************************************************
ANNOUNCED DXPEDITIONS - APRIL 2005
Mar30 - Apr4 Cyprus 5B4
By LY1DF as 5B4/LY1DF; 80m + WARC; CW; QRV mainly afternoon hours
Apr1 - Apr9 Cayman Islands ZF2UJK
By K4UJ fm Grand Cayman Is; 80 40 20 17 12 10m; CW SSB fm north side of
island
Apr1 - Apr15 Bolivia CP6D
By DF9GR as CP6/DF9GR fm southern Bolivia; 80-10m; mainly CW RTTY PSK;
QSL OK via DARC Buro
Apr3 - May05 Dominican Republic HI8IK
By IW2OAZ fm Sto Domingo and Bayahibe; QSL OK via Buro or direct
Apr4 - Apr12 South Cook Islands ZK1APX
By AI5P; 40-10m; CW
Apr6 - Apr20 Botswana A25
By DL7CM DM2AYO as A25/homecall (perhaps A25CM); 160-6m; CW SSB RTTY PSK
Apr7 - Apr11 Macao XX9
By JA0SC; 20 15 10m; SSTV RTTY
Apr15 - Apr29 Bahamas C6AWF
By G4WFQ fm Treasure Cay, Abaco Is (NA-080); 80-10m; CW, RTTY, some SSB;
QSL via G3SWH or LotW
Apr18 - Apr25 Ghana 9G5
By DL7DF; 160-10m; CW, some SSTV; yagi + dipole; 700w
Apr19 - Apr29 Kyrghyzstan EX
By ES1FB as EX/ES1FB; holiday style operation;
QSL: Jaak Meier, Box 2907, 13102, Tallinn, Estonia
Apr19 - May17 Kyrghyzstan EX
By ES1RA as EX/ES1RA; holiday style operation;
QSL: Oleg Mir, Box 806, 11702, Tallinn, Estonia
Apr20 - May8 Mongolia JT1Y
By I0SNY; Apr 25-26 as JT2Y from Choybalsan, Khosbayar;
QSL OK via Buro or direct Apr22 - Apr25 Liechtenstein HB0
By IZ1DSH IK1WEG IZ1GDB as HB0/homecall; 80-10m; CW SSB;
QSL OK via ARI Buro or direct
Apr22 - Apr25 Luxembourg LX
By ON4BAG ON4LO ON6QX ON6UM as LX/homecall; 160-10m; SSB CW Digital;
QSL OK via Buro or direct
Apr22 - Apr26 Liechtenstein HB0
By IZ1DSH IZ1GDB as HB0/homecall fm Gaflei Malbun; 80 40 20 30m; CW SSB;
QSL OK via Buro or direct
Apr23 - May1 Egypt SU8IOTA
By SU1HM SU1SK SU2TA SU1SA fm Disuqi Is (AF-NEW) in the Nile Delta and
Sinai Region Group:
QSL: Said Kamel, PO Box 190, New Ramsis Center, Cairo 11794, Egypt
******************************************************
UPCOMING CONTESTS - APRIL 2005
EA RTTY Contest 1600Z, Apr 2 to 1600Z, Apr 3
RSGB 80m Club Championship, CW 2000Z-2130Z, Apr 4
ARS Spartan Sprint 0200Z-0400Z, Apr 5
YLRL DX-YL to NA-YL Contest, CW 1400Z, Apr 6 to 0200Z, Apr 8
JIDX CW Contest 0700Z, Apr 9 to 1300Z, Apr 10
ARCI Spring QSO Party 1200Z, Apr 9 to 2400Z, Apr 10
TARA Skirmish Digital Prefix Contest 0000Z-2400Z, Apr 16
EU Spring Sprint, CW 1500Z-1859Z, Apr 16
NAQCC Weeknight 40/80-Meter Sprint 0030Z-0430Z, Apr 20
RSGB 80m Club Championship, Data 2000Z-2130Z, Apr 21
SP DX RTTY Contest 1200Z, Apr 23 to 1200Z, Apr 24
EUCW/FISTS QRS Party 0001Z, Apr 24 to 2359Z, Apr 30
That about does it for this issue. Have fun and Good DX
73
Thom WI8W
Subscriptions can be made by sending a email to rttygazette@wi8w.org with
the word Subscribe in the subject line and your valid email address in the
body of the message.
To usubscribe from the list send a email to rttygazette@wi8w.org with the
word Unsubscribe in the subject line and your valid email address in the
body of the message.
To change your email address, send a email to rttygazette@wi8w.org with the
words Change Address in the subject line with your old email address
(marked as such) and your new email address in the body of the message.
Articles, info, DX announcements etc. can be emailed to our address at
rttygazette@wi8w.org
Read previous mail | Read next mail
| |
