| |
ZL2VAL > ROVERS 17.07.04 05:25l 133 Lines 6977 Bytes #999 (0) @ WW
BID : 5234-ZL2VAL
Read: GUEST
Subj: Status, 15/16 July
Path: DB0FHN<DB0THA<DB0ERF<DB0ROF<DB0ACH<ON0DXC<WA7V<VK7AX<ZL2BAU<ZL2AB
Sent: 040717/0016Z @:ZL2AB.#46.NZL.OC #:44133 [New Plymouth] FBB7.00g $:5234-ZL
From: ZL2VAL@ZL2AB.#46.NZL.OC
To : ROVERS@WW
Update: Spirit and Opportunity
*SPIRIT UPDATE:
Spirit Gets Into Position for a Tune-Up - sol 181-182, July 16, 2004
*Sol 181:*
On sol 181 the plan for Spirit was to deploy the instrument deployment
device for microscopic imaging, then perform a two-hour Mössbauer
integration. The rover was to conduct miniature thermal emission
spectrometer and navigation camera observations of rover-disturbed soil.
After this, the rover was to drive to a relatively flat area dubbed
"Engineering Flats." This was to prepare for a multi-sol engineering
activity to heat, and ideally re-lubricate, the right-front wheel
actuator. After the drive, Spirit was to take a 360-degree navigation
camera panorama, followed by miniature thermal emission spectrometer
observations during the communications session with NASA's Mars Odyssey
orbiter. Unfortunately, as Spirit began to execute the sol 181 plan, the
onboard software predicted an instrument deployment device collision.
This prevented further arm functions and the drive.
*Sol 182:*
On Sol 182, rover planners quickly determined the cause of the
instrument deployment device error and continued to plan for sol 182 as
normal. The intent for sol 182 was to complete the activities originally
intended for sol 181. The sol 182 plan executed nominally, placing
Spirit squarely in the middle of Engineering Flats.
------------------------------------------------------------------------
*OPPORTUNITY UPDATE:
Opportunity Reading Rock Within its Reach - sol 159-163, July 15, 2004
Opportunity has not moved (intentionally or otherwise) since its
stabilizing maneuver on sol 158. The rover has been using the
instruments on its arm and mast to study the rocks at its current
location, which is in the sixth layer encountered on the way into
"Endurance Crater." Opportunity remains in excellent health. Deep sleep
has been invoked every other night to save energy; the miniature thermal
emission spectrometer continues to operate nominally despite
temperatures as low as -53 degrees Celsius (-127 degrees Fahrenheit) on
some nights.
Opportunity is due for a set of "corrective lenses" (new
hazard-avoidance camera models) after the trial run of new camera models
is complete on Opportunity's twin rover, Spirit. In the meantime, the
rover team has been using microscopic imager mosaics to locate targets
when the hazard-avoidance camera-based targeting is not sufficient.
The mechanical team is investigating an anomaly involving the door on
the alpha particle X-ray spectrometer. The spectrometer has two contact
switches; one that indicates its doors are open, another that indicates
it is fully in contact with its target. For the purpose of opening the
alpha particle X-ray spectrometer doors on sol 161, engineers placed the
spectrometer on the compositional calibration target, a rock disc with a
known composition that is located on the underbelly of Opportunity. It
is used to calibrate the Mössbauer instrument periodically. The team
expected both contact switches to trip on that move; only the in-contact
switch tripped. The next sol, when the spectrometer was removed from its
rock target, a front hazard-avoidance camera image indicated that the
doors were fully open. A subsequent move to close the doors resulted in
only partial closure. The team tried again to open, then close the doors
and was successful, with the doors fully open, then fully closed during
that maneuver. The door-open contact switch, however, once again did not
trigger as expected during that maneuver. Since the team is still able
to safely open and close the alpha particle X-ray spectrometer doors,
full use of the instrument is not compromised.
*Sol Summaries:*
sol 159: The operations team planned this sol's activity a day in
advance so that they could a enjoy a much-deserved holiday on July 4th,
resulting in a relatively quiet sol on Mars for Spirit. The sol's
activities included daily miniature thermal emission spectrometer and
panoramic camera atmospheric observations. A calibration of the
miniature thermal emission spectrometer vertical scan mirror actuator
was also conducted. The vertical scan mirror actuator operates like a
periscope, allowing the miniature thermal emission spectrometer to
target things vertically from the ground to the sky.
sol 160: Opportunity forfeited deep sleep overnight from sol 159 to sol
160 to take advantage of an optimal communication window with Mars
Odyssey. We used the microscopic imager to take a mosaic of the
"Drammensfjorden" location on the rock "Millstone," which is in layer
"F" of Endurance Crater. The microscopic images were taken to enable the
accurate placement of the rock abrasion tool on sol 161. The Mössbauer
spectrometer was then placed on the compositional calibration target
(CCT). This was the first such use of the CCT and was done partially out
of concern that the instrument's behavior might be affected by the
rover's present tilt of roughly 25 degrees. The rover team put
Opportunity into a deep sleep the night of sol 160.
sol 161: The rover awoke from deep sleep to make some early morning
atmospheric observations, including another attempt to image clouds.
Later that morning the Mössbauer instrument was stopped and removed from
the CCT. The rock abrasion tool was then used on the target
Drammensfjorden, creating a 6.3mm (a quarter of an inch)-deep hole
during the two and one-half hour sequence. The day ended with more
atmospheric observations and a placement of the alpha particle X-ray
spectrometer on the abraded rock abrasion tool hole.
sol 162: Opportunity woke up in the wee hours of sol 162 for an Odyssey
communication session and to start the alpha particle X-ray spectrometer
observation. The alpha particle X-ray spectrometer collected data from
the hole in Drammensfjorden until 10:30 a.m. local solar time. The data
indicated that the alpha particle X-ray spectrometer doors were fully
open, despite the failure of the door-open switch to trigger when the
doors were opened on the CCT. The rover then took a series of
microscopic images of the rock abrasion tool hole before starting a
Mössbauer integration at the same location. The Mössbauer integrated
until the team invoked deep sleep at 7p.m. local solar time, and was
restarted after deep sleep at 7a.m. the next sol.
sol 163: Rover engineers stopped the Mössbauer then successfully opened
and closed the alpha particle X-ray spectrometer doors for diagnostic
purposes. The rover arm was then stowed and the rover began a two-sol
panoramic camera science survey of areas upslope from our current position.
=========================
73 de Alan, (Sysop ZL2AB).
AX25:ZL2VAL@ZL2AB.#46.NZL.OC IP :zl2val@qsl.net
APRS:!3903.34S/17406.45E]
Wackiest Warning Labels Ever
----------------------------
* An "Aim-n-Flame" fireplace lighter cautions:
"Do not use near fire, flame, or sparks."
Read previous mail | Read next mail
| |
