OpenBCM V1.13 (Linux)

Packet Radio Mailbox

DB0FHN

[JN59NK Nuernberg]

 Login: GUEST





  
G4EBT  > QRP      11.12.98 10:26l 35 Lines 1296 Bytes #-10202 (0) @ WW
BID : FB0690G4EBT
Read: GUEST
Subj: "EPIPHYTE" 80M TX: AUDIO PROBS
Path: DB0ZKA<DB0KFB<DB0CZ<DB0GE<DB0HOM<DB0ZDF<DB0AIS<DB0MW<DB0ERF<DB0SHG<
      DB0HSK<PI8DRS<PI8DAZ<PI8GCB<PI8MBQ<PI8VNW<GB7PMB<GB7MAX<GB7WRG<GB7GBY<
      GB7HUL
Sent: 981210/1928Z @:GB7HUL.#15.GBR.EU [HULL] #:74878 FB0690G4EBT FBB5.15
From: G4EBT@GB7HUL.#15.GBR.EU
To  : QRP@WWW


Hi and thanks for reading this.

I've built the little 5 Watt Epiphyte 80M SSB transceiver designed by
Derry Spittal, VE7QK, and the receive side is nothing short of amazing.
It's sensitivity seems to be just as good as my trio TS830, though the
selectivity isn't quite as good but still excellent.
Late in the evenings, DX stations can be heard from all over the place -
Stateside, and all of Europe.

However, despite carefully checking and adjusting everything on the TX
side, the transmitted audio sounds rough and a little distorted. I've
fitted a preset pot in place of R17 in the 741 mic amp "U6" to see if
adjusting the gain would help but it makes no difference. (I'm using an
electret mic as recommended).

I've worked other station using the EP-2 and their TX audio sounds first
class. Obviously I don't want to let the world of QRP down by putting out
a poor signal! I wonder therefore, if any other QRPers who've built the
EP-2 have had a similar problem and have overcome it? If so, I'd be very
pleased to receive any advice, as one of my New Year resolutions is to get
the EP-2 on the air :-)

Best wishes to all for Christmas and 1999.


73 - David, G4EBT @ GB7HUL

Message timed: 19:18 on 10 Dec 98
Message sent using WinPack V6.4


Read previous mail | Read next mail


 17.11.2026 09:28:53lGo back Go up